Finally, SAS'ed the Migo... and she sits.....

[synwars]

That seriously looks hot. You need dual cases though, then you wouldn't need that step up.

[*FFC*]

That seriously looks hot. You need dual cases though, then you wouldn't need that step up.

Thank ya

Dual cases won't make too much of a difference if I can't put it in 4 Gotta get that done first

[hudlenutz]

A little weld-on bump stop might be a cheap temporary cure for your rubbing problem, until you can move the axle forward, or tub the firewall.  I've got my ifs torn most of the way off right now, and the sas is mighty tempting.  Glad to see you got it done finally.

[rockscrambler]

sweet !!!!! ride and look at that flex. someone is ready for the con.

[*FFC*]

sweet !!!!! ride and look at that flex. someone is ready for the con.

I wish!!! I can't even get out of 1wd yet Soon When you gonna come with me to break her in?

[synwars]

sweet !!!!! ride and look at that flex. someone is ready for the con.

Haha, let's not get her too excited, she's still in need of some armour... Although that would be a good christening wouldn't it?

[*FFC*]

Although that would be a good christening wouldn't it?

but I think it's gonna get it in Moab we'll see

[BLACKDOG]

Thank ya

Dual cases won't make too much of a difference if I can't put it in 4 Gotta get that done first

Actually, it would help with your front driveshaft angle, it would pull the output for tthe front further back ( about 6 inches) so the angle wouldn't be near as steep.  I'm not sure if it'd be enough but it would certainly help

[*FFC*]

Good point BD....

here we go with crossmember difficulties again...

[Wermz84]

   Looks nice!!       Fenders are overrated anyway!!

[MR_DIY]

I think if ya ditched the fenders altogether and had some type of tube bumper that tied into the future sliders that tired into the rear wheelwell hoop sliders  that tired into a spare tire carrier w/ rear stinger that welded to the rear tube bumper.  it'd be hotter               looks good gangsta'     

[Rocksurfer]

Shoulda moved that axle a little more forward to fit 35's, you may have to do a body-lift to clear it 

[BLACKDOG]

Shoulda moved that axle a little more forward to fit 35's, you may have to do a body-lift to clear it

For the love of GOD!!! don't make it any taller!!! 

Rocksurfer, that thing already wobbles from side to side if you look at it funny, if she lifts it any higher, it'll roll off a speedbump

[Rocksurfer]

For the love of GOD!!! don't make it any taller!!! 

Rocksurfer, that thing already wobbles from side to side if you look at it funny, if she lifts it any higher, it'll roll off a speedbump

So you sayin' it wouldn't make a good mall cruiser?

[BLACKDOG]

So you sayin' it wouldn't make a good mall cruiser?

  unless you made sure you hit the speed bumps perfectly head on

[Rocksurfer]

  unless you made sure you hit the speed bumps perfectly head on

.....and big trouble if there is a rain gutter running down the center of the lane.

[*FFC*]

okay you two It don't wobble that bad, BD it only wobbled so bad because my U-Bolts were loose I just tightened em down this morning and it's a lot smoother now And guess what else? I've put about 500 miles on it since the swap and I haven't rolled it yet

[Cheesemaker]

A little trick we used to do on the u-bolts at LS was to torque down the first nut and then tighten a second nut down on top of the first.  Especially if blocks were used!

[rockscrambler]

I wish!!! I can't even get out of 1wd yet Soon When you gonna come with me to break her in?

ASAP = THE FIRST TIME THERE IS A RUN AND I'M OFF OR MCR5 <already have in for the time off. which ever comes first

[synwars]

COME - AWN. Update update update! We are in need of UPDATE!!! Give it to us!

[*FFC*]

COME - AWN. Update update update! We are in need of UPDATE!!! Give it to us!

I been posting update PICS in the *Toymiga* thread I haven't worked much on it except the interior to seal off the exhuast from comin into the cab, a little sawzalling on the frame and gettin some poser shots.... I hope to be gettin the shocks IN this pay period, even if I have to buy the mounts

[unclejpl4x4]

Toymiga     

[synwars]

You Americans sure have a different sense of humour... Or maybe it's us Canadians. Either way, I don't get it... Toymiga???

[Rocksurfer]

You Americans sure have a different sense of humour... Or maybe it's us Canadians. Either way, I don't get it... Toymiga???

[Canadian accent]Right-on, we are an odd lot eh?[/accent]

[*FFC*]

You Americans sure have a different sense of humour... Or maybe it's us Canadians. Either way, I don't get it... Toymiga???

It's an Amigo and I'm building it with Toyota parts... Amiga is the femenine version of Amigo... ToyMiga

[yotaweelr]

hey justina, crossover is installed and my truck is driving again, thanks. I just need the 30 spline's and the arp studs and i am ready...oh ya, i only have one shock on my truck right now...forgot that.

[*FFC*]

hey justina, crossover is installed and my truck is driving again, thanks. I just need the 30 spline's and the arp studs and i am ready...oh ya, i only have one shock on my truck right now...forgot that.

Hey Jeremy! Awsome to hear!! I can't wait to see that thing once it's done... Oh, and good luck with no shocks I'm gettin used to it but it's not fun!


Oh, I should have something for ya next week

[MR_DIY]

quote]

        

[yotaweelr]

cool

[*FFC*]

quote]


        

He knows what I'm talkin about

So, I got a stereo for the Migo yesterday NO more listening to myself try to sing!!!!!