Topic: Message #159888

[Willy Mammoth]

you had a high pinion fromt if i remember correctly, why did you swich to the v6 third

I knew I shulda explained my plans here.
 
  I was going to build a custom T case to lower the rear output and put the V6 in the rear, but time has run out. I decided to keep the HP in the rear and have built a spare driveshaft. I needed a spare HP 3rd in case, but the gears aren't available yet. So I built the V6 and put it up front now while I was in there doing the Bobby Longs. That way I don't have to do it on the trail when I need a HP for the rear.

I know this is all wrong, but that's what makes it intersting.