Diesel GOAT: The one I wish Toyota would have built

Started by helipilot77, May 20, 2015, 12:49:27 PM

0 Members and 1 Guest are viewing this topic.

helipilot77

#390
They have been found to be important for engine longevity for four cylinder engines over 2.5 liters. This is why Toyota used them on the 3RZ but not on the 2RZ.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

RB

1KD has them also, maybe i missed something....are you talking about deleting them?
88' 4Runner
Build Thread

helipilot77

Quote from: RB on August 03, 2017, 11:24:24 AM
1KD has them also, maybe i missed something....are you talking about deleting them?

No I'm not deleting them. I think they have value.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

LittleSteve

Quote from: helipilot77 on August 03, 2017, 11:54:08 AM
No I'm not deleting them. I think they have value.

probably jump out the engine mounts without them, or shake your teeth out.
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

Slabzilla

You wear the same safety shoes that I do when rebuilding my engines.   :thumbs:
'85 Xtra-cab, 4.5" Downey Off-Road lift, 12-15 KM2's on American Racing Baja's, Marlin's-4.88's & 4.7's, Downey Off-Road CAI, Marlin rear bumper & sliders

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

helipilot77

Quote from: Slabzilla on August 03, 2017, 05:19:29 PM
You wear the same safety shoes that I do when rebuilding my engines.   :thumbs:

It's 100° right now. Don't want to get heat stroke.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

LittleSteve

Quote from: helipilot77 on August 04, 2017, 02:06:10 PM
It's 100° right now. Don't want to get heat stroke.

Id still be wearing boots... and besides winters coming, tomorrow. Here it is anyways.
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

helipilot77

#398
It's about time to tow the goat home.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Rockcrawlintoy

Quote from: helipilot77 on August 07, 2017, 10:22:59 PM
It's about time to tow the goat home.


You need at least a 3/4 ton diesel to tow that man don't you know!!!
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

LittleSteve

Quote from: RockcrawlinJK on August 07, 2017, 10:35:01 PM
You need at least a 3/4 ton diesel to tow that man don't you know!!!

id have towed it with blue
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

helipilot77

Quote from: LittleSteve on August 08, 2017, 04:34:16 PM
id have towed it with blue


I don't think even the mighty old blue would have made it the whole 220 miles. Just in case not everyone has figured it out, I didn't tow the runner with the mouse sled. It would have done it in.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

LittleSteve

Quote from: helipilot77 on August 09, 2017, 12:20:30 PM
I don't think even the mighty old blue would have made it the whole 220 miles. Just in case not everyone has figured it out, I didn't tow the runner with the mouse sled. It would have done it in.


I doubt it would, then there would have been no excuse not to re-power it, on the road side. ROADKILL!
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

emsvitil

Quote from: helipilot77 on August 09, 2017, 12:20:30 PM
I don't think even the mighty old blue would have made it the whole 220 miles. Just in case not everyone has figured it out, I didn't tow the runner with the mouse sled. It would have done it in.

Why not?    :dunno:

Where's your sense of adventure?


:cheese:

Ed
SoCal
86 SR5 XtraCab
22RE  W56B
31x10.50R15

Rockcrawlintoy

Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

helipilot77

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

helipilot77

#407
Got the oil pump/front housing and exhaust side balance shaft idler gear installed tonight.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

:)bestgen4runner

I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

Rockcrawlintoy

Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

helipilot77

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

LittleSteve

Quote from: RockcrawlinJK on August 09, 2017, 04:21:55 PM
blue didnt like a post hole digger behind it.

Blue doesnt really like passengers...
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

LittleSteve

Quote from: :)bestgen4runner on August 09, 2017, 09:02:40 PM
Round up 2018? 4dice and Rubicon?
Interested?

I had already started to consider this...

and yes

If im invited....
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

:)bestgen4runner

Quote from: LittleSteve on August 11, 2017, 03:20:51 PM
I had already started to consider this...

and yes

If im invited....
Oh Yes, You are invited for Sure. Now help Me get the rest of perfect Fit to come along with us.
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

LittleSteve

Quote from: :)bestgen4runner on August 11, 2017, 03:23:05 PM
Oh Yes, You are invited for Sure. Now help Me get the rest of perfect Fit to come along with us.

10-4

might ship have a go at shipping a truck again...
LittleSteve: Holding up traffic and giving dubious advice since 2014.

1/5th of Perfect Fit. The awkward foreigner no one understands.

Refusing to fit in or comply.

Easy is not worth anything.

Show me a home where the UZ's roam.

helipilot77

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

helipilot77

#416
This Saturday Zippo and I tore into the transmission to start rebuilding it.

Got it all tore down and everything looked pretty good aside from some very black oil with some water in it.
Thank again Zippo!
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

emsvitil

Ed
SoCal
86 SR5 XtraCab
22RE  W56B
31x10.50R15

Rockcrawlintoy

Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

helipilot77

That is the rare R-151f that was behind the 86 & 87 turbo pickups.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i