OVRAROK. My 87 4runner

[:)bestgen4runner]

OK, GIVE ME A BIT AND I WILL BE BACK

[OVRAROK]

OK, GIVE ME A BIT AND I WILL BE BACK

thanks so much bestgen4runner, its a running

[blackdiamond]

thanks so much bestgen4runner, its a running

Running as in vroom vroom?

[OVRAROK]

Running as in vroom vroom?

yeah sir, you tube vid downloading

[OVRAROK]

so my only issue is no incoming power from 40 amp fuse, I'm thinking since there is nothing on fused side of 80 amp, just pigtail from fused 80 amp to power in at 40 amp. ive been using jumper this whole time trying to diagnose. a big THANKS BRO to bestgen4runner, helipilot, hogcanyonhopper, sqwadoosh, and megaphoneman for any input, help, or just plain moral support

[OVRAROK]

http://youtu.be/acNOqBUcxCE

[helipilot77]

 

She sounds like a real sweetheart.

[helipilot77]

So what was the issue?

[helipilot77]

so my only issue is no incoming power from 40 amp fuse, I'm thinking since there is nothing on fused side of 80 amp, just pigtail from fused 80 amp to power in at 40 amp. ive been using jumper this whole time trying to diagnose. a big THANKS BRO to bestgen4runner, helipilot, hogcanyonhopper, sqwadoosh, and megaphoneman for any input, help, or just plain moral support

There should be a heavy gauge white wire coming off the 80A feeding the 40A

[OVRAROK]

So what was the issue?

no power at 40 amp fuse in engine bay, and 7.5 ignition fuse. since I just learned that there is a piece of exposed metal on front of fuse, while I was patiently waiting(not) for bestgen4runner to give me my next thing to check, I started testing all fuses, before I just looked at them, it looked good but apparently wasn't good, after I found fuse, I put it all back together and she fired.

[OVRAROK]

There should be a heavy gauge white wire coming off the 80A feeding the 40A

there is not, the feed wire going into 40 amp is in original loom, I peeled back original tape a little to check for broken wire, but didn't find any, so do you think I should cut this white wire and attach to empty fused 80 amp circuit, or just tap into wire, I'm just afraid ill lose something else, and there not a lot of room to work right there

[OVRAROK]

First pic is of empty side of 80 amp, second pic is white wire coming from loom to feed side of 40 amp

Sent from my HTC One_M8 using Tapatalk

[:)bestgen4runner]

Let me look at mine when I get home.
I would like to recommend a forever fix that you never have to worry about in the future.
Just want to see how mine is then we just reproduce that.
No body knows better than Toyota.

[:)bestgen4runner]

Any Idea how this problem happened.
this is part of the original vehicle harness that worked fine before. doesn't make sense to me

[OVRAROK]

Any Idea how this problem happened.
this is part of the original vehicle harness that worked fine before. doesn't make sense to me

I haven't got the slightest clue, ive searched around looking for said missing wire, cant find anything. I'm pretty meticulious about setting parts in piles for each item. all engine stuff in 1 pile, all bellhousing and tranny stuff in another, and so on and so on. I don't know, I'm just dying to go drive it, but ill wait for you to look, thanks again

[:)bestgen4runner]

What is current set up for alternator?
Your jumper is currently running from what to what?
What happens when jumper is removed?

[jimbo74]

were you able to get a hold of the guy you got your harness from?

[OVRAROK]

What is current set up for alternator?
Your jumper is currently running from what to what?
What happens when jumper is removed?

Stock alternator on 3rz.  high output soon, I'm touching positive on battery to spade going out of of 40 amp . Nothing happens with key off. Turn key to run. Everything on dash comes on . When I remove jumper , nothing lights up on dash, key doesn't do anything

[:)bestgen4runner]

Wow, You wake up early ovrarok.
I will try to look at mine tonight for you.

[:)bestgen4runner]

Alright My friend took my truck apart for you. 
Here are pictures.
I even took one of the cover so you know what is where from now on.
would you like one of the inside cover? (drivers kick panel fuse block)
look it over and we move forward.
I left it apart in case we need more pictures and or info. 
Going fishing in the morning with My two youngest boys so wont be back on until 11 or noon.

[SqWADoosh]

Alright My friend took my truck apart for you. 
Here are pictures.
I even took one of the cover so you know what is where from now on.
would you like one of the inside cover? (drivers kick panel fuse block)
look it over and we move forward.
I left it apart in case we need more pictures and or info. 
Going fishing in the morning with My two youngest boys so wont be back on until 11 or noon.

You don't have a 3rz swap though....

[:)bestgen4runner]

On the last picture ? You do have those two connectors plugged into the top next to fuses correct?

[:)bestgen4runner]

Is you relay/ fuse block differant that mine on your 3rz swap trucks?

[1985CRAWLER]

Hey Dave I'll be down in your area tomorrow, I'll come by and see if I can do anything , when I did my swap I left for the most part my factory 22re fuse box alone besides extending the main power wire but where my no start problem was coming from was my ignition wire / starter relay , my truck had a push button start and the 3rz swap I did did not like that and I had to wire it back to the factory ignition source

[1985CRAWLER]

Is you relay/ fuse block differant that mine on your 3rz swap trucks?

Generally speaking they are the same when you use the factory 22re stuff , I'm not sure if Dave put the 3rz fuse box in but I don't think he did

[:)bestgen4runner]

Based on the pictures he sent me I believe it is the same as mine.

[jimbo74]

hey dave, haven't noticed this yet, can you compare it to the other truck? the wiring should all be the same or close.....

[SqWADoosh]

Based on the pictures he sent me I believe it is the same as mine.

If it is the same then how could the problem be there? As he had a good running truck before the swap?

[:)bestgen4runner]

That is a question I also have asked?
Does not make sense. We will get to the bottom of it.

[OVRAROK]

hey dave, haven't noticed this yet, can you compare it to the other truck? the wiring should all be the same or close.....

other truck is carbed, so no efi