HAM operator check-in

Started by helipilot77, July 08, 2014, 05:17:35 PM

0 Members and 1 Guest are viewing this topic.

helipilot77

Don't know why this hasn't been done yet.
Name: Nathan
Location: Seattle, WA, USA
Call sign: KG7LUX
Equipment: Kenwood TK-780 Mobil (25 watt)
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Dr.Maxwe001

Jeff Maxwell
Tuscaloosa Alabama
KK4SXA
HT= Icom ID-51 Dstar
Mobile= Kenwood TM-V71A
Antenna= RuffRider Hyper Gain
Base= Yaesu 897D
Tuner= AT-897 PLUS * mounted to radio for away from home use*
Tuner= AT-1000 proII
SWR/POWER Meter= FLT Meter *designed for the Yaesu 897D*
Antenna= HF G5RV inverted V 65 ft. up on a fiberglass pushup pole.
Antenna =2 mtr 70cm- Hi Gain Yagi 10db gain
AMP= HF Ameritron ALS 600 with power supply
AMP=144 mhz. Mirage 180 amps
and a list of other things as well to help with the CW AND PSK31


send me a msg on here and we can try to work each other

73 KK4SXA
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

n6dlh

Guess I am late to the party!

Dave
Hampton VA
N6DLH

Run Kenwood TK-790's Mobile
Also run Midland CB I converted to 10m 25W on a Firestick
Run Kenwood TM-281 and TK-890 in the shack
Also have a Icom IC-746pro for HF

1989 4Runner 3rz Swap

Dr.Maxwe001

N6DLH we are with in a close range we should try to work each other in a QSO


Sent from my iPhone using Tapatalk
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

helipilot77

Thought I would add some photos of my mobile in my 4runner. This is how I decided to mount it.

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Dr.Maxwe001

IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

helipilot77

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

chim

I have a Kenwood TK-7150 sitting around, is this a commercial use radio only or can I use it like a normal HAM radio?

I am a complete noob when it comes to HAM, but I am trying to learn..

BenMara

Im local to Charleston, SC.  If im around V/Uhf it camping on 146.52.  I also run V/Uhf in the mobile. Soon to have HF in the Mobile. Mobile is a TS-480 and a FTM-350AR. Base is a Elecraft k3, and a Ftm-350r.
I also monitor the local repeaters, i care to do all my QSOs on HF and on 146.52. Staying away from the local repeater Drama.

helipilot77

Quote from: BenMara on September 26, 2014, 11:34:21 PM
Im local to Charleston, SC.  If im around V/Uhf it camping on 146.52.  I also run V/Uhf in the mobile. Soon to have HF in the Mobile. Mobile is a TS-480 and a FTM-350AR. Base is a Elecraft k3, and a Ftm-350r.
I also monitor the local repeaters, i care to do all my QSOs on HF and on 146.52. Staying away from the local repeater Drama.

What is your call sign though?
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

BenMara

I rather not, all you need is a call sign to find out were some one lives.  http://wireless2.fcc.gov/UlsApp/UlsSearch/searchLicense.jsp
But think of all the underage hams, sub 18yrs old. They are minors, and their info is public.   I just think the FCC should keep some of our info away from prying eyes.

Dr.Maxwe001

Just use a PO Box and dont worry about it
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

helipilot77

-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Dr.Maxwe001

I say we try to work each other on the air HF or Echolink
Whos with me ?
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

Dr.Maxwe001

We need to get a QSO soon on a band
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo


helipilot77

FYI: after chasing down an RF noise for a couple weeks I finally found that my Trucklite LED headlights were creating the noise. I will have to shield the back sides of them.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Dr.Maxwe001

I got my ticket for my extra class! Even though i got my paper copy i will feel better when its in the computer and i have a hard copy in my wallet and on my wall
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

BenMara

Quote from: Dr.Maxwe001 on February 08, 2015, 01:20:17 PM
I got my ticket for my extra class! Even though i got my paper copy i will feel better when its in the computer and i have a hard copy in my wallet and on my wall

Im in the Same Boat, i just dont feel comfortable saying /AE

Dr.Maxwe001

I am using a G5RV iand made a control box that lets me get on 160 m havent tested it yet but I think it will work  :crossed:
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

BenMara

yea alot of the local Ham are just realizing the advantages of Ladder Line.  As you have a decent Antenna Transmatch, you should be golden

my set up is posted on http://www.qrz.com/db/KK4CRY

Dr.Maxwe001

My NEW UPGRADE is in the computer !!!! Just checked it tonight KK4SXA 73
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

BenMara

Congrats, im still waiting for mine to drop on FCC ULS

BenMara

Finally updated on ULS and paper came within a week...

Phazertwo

Wow, I am a touch late to the party...

KD0JCA
Denver CO
Yaesu FTM-350AR with GPS for APRS
Yaesu VX-6
Yaesu VX-7 (willing to trade for another VX-6)


Picture of the mount for the FTM-350 (Blue cable has been replaced with a black...)


PZ
92 xtra cab, with some stuff...

Quote from: yotabj on October 30, 2006, 10:01:02 AM...why buy when you can build?

helipilot77

Ooooooh! If you have APRS tell me about your setup. I am planning to install APRS in my 4Runner.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

Phazertwo

I picked the Yaesu FT-350AR because it has dual receivers, cross band repeat, and is capable of APRS with the GPS antenna.  Cross band repeat is a great function. I use it for boosting the range of my handheld when I am hanging out at my property in the mountains, and I also let it run when the truck is on the trailer, and just use my handheld in the tow rig.  Again this is just boosting the range (handheld is only 5 watts, FTM-350AR is 50 Watts).

APRS was VERY easy to setup, I was actually quite surprised.  I read though the instructions of the radio, set the "beaconing" the way I like, and that was that.  I don't actually use it very often, but it is great for 4 wheeling.  If my wife is not riding shotgun, she can just log into the APRS website and enter my call sign to see where I have been/am.  The track is not always the best because it plays connect the dots and for some reason it doesn't use the time stamp to figure out which dot is next...

If you have some other friends with APRS in the area it is also very useful.  For example, if my buddy beacons, my radio picks up his call sign and plays a jingle telling me he is in radio range.  I don't even have to pay attention the beacons coming in, I just have to listen.  That way I don't have to call him on one of the calling freqs.

Here is the website: http://aprs.fi/#!lat=39.92850&lng=-104.95590.  Punch in my call sign (KD0JCA) and you should be able to see my last track (this last summer, before my truck died).  I would like to figure out a way to send text messages quickly, no reason why really, I just think it would be nifty to be able to text your friends over the radio!

PZ
92 xtra cab, with some stuff...

Quote from: yotabj on October 30, 2006, 10:01:02 AM...why buy when you can build?

BenMara

I have the Same FTM-350AR loved it some much purchased a Used FTM-350R, but sold it year later when work dried up...

helipilot77

I am now APRS capable!  :woohoo: I will be hiding this baby in the dash and sleeping much better knowing that I can check the location of my truck whenever I want. Took me all of two minutes to be sending a signal that showed up on googles APRS map. 



-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

BenMara