0 Members and 17 Guests are viewing this topic.
Makein my own eliminator plates!Axle is bassicly done!
Anyone know if I can just bolt my ifs spindles on my axle ??
This is tonight's project
No they will not. I believe you need the later style solid axle spindles, and then you can get hub spacers from sky offroad to use your ifs hubs and fj 60 vented rotors with your v6 calipers. Might be cheaper to just get wheel spacers if thats the case, and run your v6 calipers. Somebody feel free to chime in on this if im incorrect.
So I ended up with 1982 fj40 landcruser rotors hey bolted right up, only 23.00 per rotor at ohriley.
those look like some ruff country front hangers. i kinda wish i dropped it down about an inch from the bottom of the frame. someone told me that it would help the pinion angle. but i will have to see know that i am going to use the high pinion in the front. coming along nice. if you have the time use it. All gusseting and painting is worth ever minute.
Lookin' great! If those are RUF springs you might want to keep a few extra leaves around for fine tuning. I've always had to go with 6 leaves total after a few months of driving around and wheeling. They get pretty soft.
pull it out so we can see some side shots. nice
Started by rockhound Trail Reports, Events, and Gatherings
Started by To The Floor Parts Wanted
Started by YotaJohnBoy4x4 Rig Gallery
Started by taco522 Parts Wanted
Started by 84Yota Parts For Sale