Topic: Zebra 85 2wd to 4wd( The Sketchy Build!)

[1985CRAWLER]

sick truck man, and that 3.4 will make it even more badass!

[zebracrawler]

thanks 

[zebracrawler]

cut the crossmember up to make it work where i want it to forward and t case up in the cab more

[zebracrawler]

[twistedtoy92]

Looks good sittin in there!

[zebracrawler]

yep in for the last time ill post more pictures soon

[zebracrawler]

Just doing final stupid wiring stuff and fuel stuff. Im getting close to firing it up. I still need a power steering pump adjustment bracket and the small pig tail that goes to the coolant temp sensor, If anyone has one of those it would be a great help.

[zebracrawler]

[zebracrawler]

 before i cut it and rotated it away from the frame after

[zebracrawler]

also had time to cover my dash pad with some vinal not perfect but a lot better then before.
after covering

[zebracrawler]

[zebracrawler]

so got the engine all plumed up and wired ready to start but didn't have spark. I have injector pulse i have power to the coils, coils are all good, not the crank sensor. I'm thinking my computer is bad because I have no trigger coming from it. just wondering if anyone has had a problem like this

[twistedtoy92]

you check ref V straight out of ECU?

[zebracrawler]

ok plugged the edu in to a tacoma of the same year and it started it so edu is not the problem. umm 

[zebracrawler]

ok found the problem bad ignighter

[zebracrawler]

any one with a 3.4 having problems with cooling on hot days running the 3.0 rad

[John Doe]

No problem here, except when trying to go 75mph the whole way up I-80!

[zebracrawler]

i only have problems on 85 degree + days when i am going up hill in low or low low for more than a hour

[redneckcustoms13]

Do you have the 3.0 rad that is all metal or do you have the one with plastic tanks? I strongly recommend the all aluminum welded rads you can get off ebay for less than $200. I am running quite a few of them and they have done well by me.