tons 2rz three link front. Now slamming on its nuts spring under rear!newpics

Started by 89sastoyo, March 15, 2009, 11:46:16 PM

0 Members and 1 Guest are viewing this topic.

yota_krawler

Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539

89sastoyo

Quote from: yota_krawler on December 17, 2009, 10:30:53 PM
any leads on a 60?

yeah i found one but its for a dually so Id have to convert it to srw hubs which are worth more than what I would be into for a reg 60
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

So went wheelin today with a couple buddies, and Im really contemplating 60s now.


I know I want them for strength and kinda for width but I wheeled with a truck linked in the rear marlin springs up front and he had a lot of troubles and my truck literally walked threw it. I don't know if it was driver related or what but his truck was by far much more built than mine and the other two trucks I was with that went up it. It did show me that 60s with stand a lot of abuse though which is what I like lol. I also wheeled with a 1st gen linked on rocks it was pretty sweet but he had troubles to lol.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

yota_krawler

Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539

89sastoyo

it was on 42" iroks... only sheet metal from a first gen left was the hood. It was all tube but still had the toyota frame, Duals 4.7s I mean it was built, But like I don't like talking :pokinit: but the guy just mashed like point and shoot he was launchin the front tires 2-3ft off the ground bouncing off :pokinit: after he couldnt make it trying to crawl 1 time. So I think it could have been that. It all depends on what your wheeling though because my friend saw both trucks at a differen't wheelin spot and he said they did really good.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0


mattlosch

i have seen that buggy at browns before... he was just point shoot and hammer down haha well i mean i do that too but i only have single low...
1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

yota_krawler

Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539

THK Matt

Quote from: yota_krawler on December 21, 2009, 09:16:04 PM
run a 14 bolt front and 14 bolt rear

i saw it on extreme 4x4

dont they have 60outers and custom shafts? I dont remember that episode..
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

yota_krawler

Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539

axled89

that's the episode with the green s10 right.   or something eles?
i love oregon wheelin.


89sastoyo

yeah dope episode I know someone who actually planned on running that set up but never happened lol. And no breakage dude. I rallied my truck in a couple spots, had to get winched out of a gnarly tank trap I went in and truck to hit a line out sideways but they had just dumped like 3ft tall of torn up dirt so i just dug holes trying to get over a couple rocks with my front tires.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

yota_krawler

i am tryin to dig up info, i am really thinkin about it!

14bolt front and rear 5.13s spooled front and rear on 47s with a 4.3 vortec sm465 and a dana 300 + a crawl box
Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539

89sastoyo

yup uhm went wheelin tonight flopped twice. I was going threw a tank trap thing like driving threw all Xd up and broke the pass window onto the girl that was with me she started freaking out and there was walls next to the doors so she couldnt get out so I dumped the clutch in reverse put it on its side on the driver side then really couldnt go backwards so I tried going forwards out the other way and missed the stump I usuall put my front tire over which put my front pass side at a tree. I then drove up the tree with my pass front tire and couldn't back up at all so I just had to keep going up the tree which lead to flopping it onto the stump which was right at my extra cab so at this point I was on my side front tire 5ft up a tree with my driver side extra cab on a stump and drove out. I got a super gnarly dent on the cab rinkled the bed where it meets the cab and put a fat dent in the bed to.


It was a fun night though wheeled with some guys I never met before one had a really built tj and he flopped it into a trench thing they tried to dig out as a tank trap. He was sidehilling past it slid into it and flopped but we just lifted him up and he backed out of it. Also wheeled with a 1st gen runner with a supercharged 3.4 that got down. It was a blast all in all I just had cab damage and my cabs pretty much damaged haha.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

crawln503

-85 ext cab swap on std Toyota frame, 3rz, built narrowed 6 lug 60's duals/4.7 42's iroks
-94 Ford CCLB 12v. 6spd, pump cranked, guages, lifted & lots of other mods:smokin:
-89 ext cab Toyota, 3.4, 5spd on 33's

89sastoyo

haha ill post pics up of the damage I didnt have a camera just my cell and nobody took pictures of it while I was on my side haha the guys I knew weren't around either haha but the other guys that were wheelin with me were right there haha.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0



mattlosch

1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

89sastoyo

haha it was that tank trap the sammi went threw. and half way threw it I broke the window then backed up put it on its side and at the very end wehre you come out is where I drove up the tree and put it on the stump
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

I think I found the 60 Im going to buy the guy has everything I want haha to bad I don't have enough money for all of it...

But im most likely picking up the 60 this weekend. he has a truss for the 14 bolt from ballistic for a 4 link. I will probably get that and he has enough ballistic rod ends for dual triangulated 4 links so i may buy enough for the rear at the same time just to have it.

89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

mattlosch

1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

mattlosch

1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

89sastoyo

omg dude, it dumped all day monday so there was a little over a foot a the towers but it was pretty much fresh powder. And yeah in that ddrainage ditch haha. I beat the dents out today took my whole interior apart. Haha went to go see how hard it would be to get the panels off and they were half popped out already cause it was caved in so bad ill post pics of the dent. My phone died before I could take pictures of it straightend up.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

heres a couple of the cab and bed I beat the cab out completly but the back crease cause its actually part of the cab not just the xcab panel


89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

mattlosch

1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

89sastoyo

I work sunday im down sat night though if I get my interior together haha its all on the shop floor at the moment
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

so im going to get my 60 tomorrow I can't pass the deal up ill let you guys know how much I picked it up for but its dirt cheap for what It is around half price of what I usually look at. really stoked about it. when I get that the one ton building is on haha
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0