tons 2rz three link front. Now slamming on its nuts spring under rear!newpics

Started by 89sastoyo, March 15, 2009, 11:46:16 PM

0 Members and 12 Guests are viewing this topic.

83 Crawler

and i only need one day to do it. then ill measure for a Driveline and go from there you know?

89sastoyo

Yeah for sure and I just don't wantyou to think i am blowing you off and keep moving dates ya know?

I have the motor pretty much ready to be pulled one bolt on the intake left and I have to unbolt the tranny and its on its way out. I think im going to just finish everything and tow the pregnant dog to the road and call AAA to have a key made cause I cant figure out how to get the damn igintion out without a key its retarded and I wanted to punch babies earlier tryin to get it out.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

gnarrkill

haah you said punch babies. and i will wait till your free and clear to do the body lift and i get some more cash flow, i get paind in 2 days and i wanna either sell those sliders or cut em and put them on because we will need to do something about my front bumper to
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0


gnarrkill

i want one like adams, where my stinger is coming from my hanger and such
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

gnarrkill

79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0


89sastoyo

the front bumper is actually the most legit thing the guy made with tubing everything else was huuuge tubing lol.

So pulled the motor out of the two wheel drive. Ryan and I are going to go finish stripping and cleaning the other motor and putting all the efi and sensors onto it since it was converted from efi to carb now back it doesnt have the correct stuff. The swap should be done by tomorrow night just need to find a gas tank this ones got a hole drilled in it haa.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

gnarrkill

Quote from: 89sastoyo on January 14, 2010, 02:11:05 AM
the front bumper is actually the most legit thing the guy made with tubing everything else was huuuge tubing lol.

So pulled the motor out of the two wheel drive. Ryan and I are going to go finish stripping and cleaning the other motor and putting all the efi and sensors onto it since it was converted from efi to carb now back it doesnt have the correct stuff. The swap should be done by tomorrow night just need to find a gas tank this ones got a hole drilled in it haa.
call tyler. he has a efi tank i was going to buy it from him but if stock crb works out ill keep it like that
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

gnarrkill

79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0


89sastoyo

haha ryan said "ya dig" thats funny. Also uhm i will buy fozo's Cause i need one asap haha maybe trade him somethin iuno
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

gnarrkill

79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

83 Crawler

ifs box and mount.

and i said ya dig just for you adam  :eyebrow:

89sastoyo

haha thanks.

So probably no wheelin until summer if I get this job I had my interview today and it pays really well just sucks cause my weekends are tuesdays and wednesdays. If I get it the ton swap is on like donkey kong hahah.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0


gnarrkill

aha donkey kong.  ill wheel with you on the weekdays!
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

89sastoyo

haha k im down for sure I just wanna rack up the cash flow but insurance first haha. I think ill just pay six months and get it over with so I don't have to pay every month
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0



89sastoyo

yeah haha I have a three tickets and one of them is worse than most all of yours put together haha. My insurrance is going to be redic
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0


89sastoyo

tell your dads friend to hook a brother up haha.

Got the 2wd done it rips and doesn't even run good haha ill post a picture up later when i send them to my email... Deff gets it like if I had a welded diff I could probably clutch kick it in 4th and get sideways haha.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

gnarrkill

slamm it get a huge e brake like i told you haha!
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

toyotanner

yeah all my 2wd's were fast i think its just because your so used to big tires and going slow with a 22r then you have one in something smaller and it just fly's

89sastoyo

haha for sure this motor rips though its fresh bored crank rods pistons, new head cam all new seals and gaskets valves yada haha has like 1500 miles on it.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

toyotanner

its great that it only has 1500 miles on it and you are rallying the :pokinit: out of it :smack:

89sastoyo

1500 is broke in enough haha it was kris kleins after I rebuilt it I know he rallied it to but it runs really well other than it can't get it to not run rich. I just need to drive it and get all the water and :pokinit: through the fuel because I know there was some water in the tank.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0


89sastoyo

probably next weekend not the up comming but the next.. I need to clean the shop like a good days work and clean the gutters roofs of the shops and house. I also am scrapping the first gen cab and all the parts because I need them gone so once thats done go for it.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0