Glen's budget rebuild

[79coyotefrg]

I bet he has your intake manifold on before mine....I think he likes you more..

[79coyotefrg]

project cable locker is almost finished 

[mudmaster]

 

[hilux-1983]

Marlin has springs??

This is funny reading it now a days. How time flys huh?

[79coyotefrg]

This is funny reading it now a days. How time flys huh?

[79coyotefrg]

i had to flip the drivers side shock to be able to mount it

if i had bilsteins it would be better

[mudmaster]

Took some time to get that pic 

[baldwookie]

looks good bro...  have u tried it out yet?

[79coyotefrg]

well, the other day i was coming back from Bismark, (20 miles away)  10 miles on a 2 lane, then 5 miles on the interstate, after the first 3 miles i start up a hill thats fairly long,  about 3/4 the way up the hill (75 mph) i feel the slight bogging of the engine, then i see blueish smoke in the rear view   as soon as i backed off the throttle the smoke quit,  i get back into the throttle and no smoke,  i mash to the floor no smoke.  when i get home (about 6 miles later)  i stop the truck and check everything over,  nothing out of the ordinary

so  your thoughts??

[GJToyotabug]

hmm your oil breather dunno

[79coyotefrg]

hmm your oil breather dunno

oil breather vents to the air cleaner similiar to stock

[79coyotefrg]

i did find a bad drivers front wheel bearing

[GJToyotabug]

oil breather vents to the air cleaner similiar to stock

yeah like oil went up into the air cleaner it got into a cyl and burned in the cyl causing blue smoke

[79coyotefrg]

yeah like oil went up into the air cleaner it got into a cyl and burned in the cyl causing blue smoke

i would GREATLY prefer that over  a bad ring or something

[Rocksurfer]

My 4Runner did something like that once, we were on a trail and a group ahead of us was having some issues. I walked up to see what was going on (leaving my truck running) and when I walked back it was smoking. Scared the hell out of me, I ran over and shut it off, checked it out and found nothing. Fired it back up and it never smoked since. Couldn't find what caused it to do that.

[BUBBA]

You were turning so many rpms up the long hill that it pumped excess oil into the valve area faster than it could drain back to the pan until it reached the pcv and got sucked into the intake ize is smart like thatd

[79coyotefrg]

You were turning so many rpms up the long hill that it pumped excess oil into the valve area faster than it could drain back to the pan until it reached the pcv and got sucked into the intake ize is smart like thatd

but only about 4100 rpms

more suggestions??


ive gotta go replace left front wheel bearing,  glad i have a shop, stupid

[hilux-1983]

but only about 4100 rpms

more suggestions??


ive gotta go replace left front wheel bearing,  glad i have a shop, stupid

speaking of rpm's, what is safely the limit when powering up a hill as coyote was, or towing trailer

[79coyotefrg]

a 22R can easily stand 4500

my old engine was a 20/22R hybrid,  OMG  i loved that engine,  but dropped an exhaust valve at 7200 rpm

[79coyotefrg]

speaking of rpm's, what is safely the limit when powering up a hill as coyote was, or towing trailer

might i add i was in 4th gear at just under 80 mph when this happened

[GJToyotabug]

note to self dont rev over 7000RPM

[79coyotefrg]

yea  the valves float at about 6800 

[79coyotefrg]

but DAMN  the 20/22 hybrid will pull out to 7000 in a heart beat, well at least with the cam i run it did

if this motor goes down i'll build another hybrid

[GJToyotabug]

yeah stock cam on mine is flat lining at 5600 totally disapointing

[Dr.Maxwe001]

   <--------- GLEN

[Jordan7118]

4000 RPM 

7000 RPM  double   

Easy on that peddle, buddy. You're driving an old truck 

[79coyotefrg]

yeah stock cam on mine is flat lining at 5600 totally disapointing

drop the LC .440 cam in there Josh

[GJToyotabug]

i'm a thinkin i just dont have money. and if i do that i'll put higher compression pistons stronger rods and larger valves. SHOOT maybe i'll just run a 3RZ in it

[79coyotefrg]

i'm a thinkin i just dont have money. and if i do that i'll put higher compression pistons stronger rods and larger valves. SHOOT maybe i'll just run a 3RZ in it

NO NO NO,  are plenty strong, higher cr pistons are NOT needed, nor are larger valves, you just need to keep them open longer

[V-Man]

drop the LC .440 cam in there Josh

  Yes the .440 is nice if the/my motor is running.... .... ya Glen..