Author Topic: Glen's budget rebuild (Read 501208 times)

Rocksurfer · « **Reply #2580 on:** Sep 25, 2008, 07:41:08 PM »

Probably?!

79coyotefrg · « **Reply #2581 on:** Sep 26, 2008, 11:39:41 AM »

well i didnt find anything much, the pinion bearing and the 'motor side' of the carrier the bearing had spun

i'm just wondering if somebody (dont know why im a really nice person) put something in my fill hole

Jordan7118 · « **Reply #2582 on:** Sep 26, 2008, 01:14:14 PM »

Quote from: 79coyotefrg on Sep 26, 2008, 11:39:41 AM

i'm just wondering if somebody (dont know why im a really nice person) put something in my fill hole

Seriously, nobody would do that.

Why even think that? Offroading is a hobby of breakage. Plus, anyone who knows how to open up the fill plug and knows what a piece of something would do to your diff wouldn't do that. That's more trouble than somebody is willing to go to for a chuckle.

Post up pics.

YotaJosh · « **Reply #2583 on:** Sep 26, 2008, 06:01:57 PM »

Maybe you damaged it somehow in the wreck, and driving all the way to Hot Springs did it in?

79coyotefrg · « **Reply #2584 on:** Sep 26, 2008, 06:25:09 PM »

Quote from: Jordan7118 on Sep 26, 2008, 01:14:14 PM

Seriously, nobody would do that. Why even think that? Offroading is a hobby of breakage. Plus, anyone who knows how to open up the fill plug and knows what a piece of something would do to your diff wouldn't do that. That's more trouble than somebody is willing to go to for a chuckle.

Post up pics.

i know, that's just too off the wall

Quote from: YotaJosh on Sep 26, 2008, 06:01:57 PM

Maybe you damaged it somehow in the wreck, and driving all the way to Hot Springs did it in?

thats all i can think of, i even pulled the carrier apart to see if one of the spider gears bit the dirt or if the "missing" part/object was in there but i didnt find anything, there was a good bit of metal shavings in the oil

you can see where something smacked the carrier

this bearing was spinning in the cap

79coyotefrg · « **Reply #2585 on:** Sep 26, 2008, 06:30:27 PM »

i think the pinion bearings had spun on the pinion also

79coyotefrg · « **Reply #2586 on:** Sep 26, 2008, 06:31:17 PM »

Duffil · « **Reply #2587 on:** Sep 26, 2008, 06:35:11 PM »

79coyotefrg · « **Reply #2588 on:** Sep 26, 2008, 07:49:34 PM »

any ideas on what got in there ??

Duffil · « **Reply #2589 on:** Sep 26, 2008, 09:26:50 PM »

Quote from: 79coyotefrg on Sep 26, 2008, 07:49:34 PM

any ideas on what got in there ??

heat. and lots of it.

probably just a misc. chunk of crap. have you looked inside your housing?

unclejpl4x4 · « **Reply #2590 on:** Sep 27, 2008, 08:16:21 AM »

i was wondering when we where gonna see your rear

79coyotefrg · « **Reply #2591 on:** Sep 27, 2008, 08:26:06 AM »

Quote from: Duffil on Sep 26, 2008, 09:26:50 PM

heat. and lots of it.

probably just a misc. chunk of crap. have you looked inside your housing?

well i DID drive 4 miles to town with very little oil in there $I\'m Down$

Rocksurfer · « **Reply #2592 on:** Sep 27, 2008, 10:40:07 AM »

Are all the ring bolts there, my Willeys had one back out and did some good damage.

Rockcrawlintoy · « **Reply #2593 on:** Sep 27, 2008, 11:19:50 AM »

Quote from: 79coyotefrg on Sep 27, 2008, 08:26:06 AM

well i DID drive 4 miles to town with very little oil in there $I\'m Down$

there is the problem right there

KDXSR5 · « **Reply #2594 on:** Sep 27, 2008, 12:55:51 PM »

79coyotefrg · « **Reply #2595 on:** Sep 27, 2008, 02:54:54 PM »

Quote from: Rocksurfer on Sep 27, 2008, 10:40:07 AM

Are all the ring bolts there, my Willeys had one back out and did some good damage.

yep they was all there

THK Matt · « **Reply #2596 on:** Sep 27, 2008, 08:17:41 PM »

that pinion gear looks BAD!!! not enough backlash and not enough oil in there.

79coyotefrg · « **Reply #2597 on:** Sep 28, 2008, 08:33:45 AM »

Quote from: that HO kid on Sep 27, 2008, 08:17:41 PM

that pinion gear looks BAD!!! not enough backlash and not enough oil in there.

actually when i took it out it had too much backlash

THK Matt · « **Reply #2598 on:** Sep 28, 2008, 12:50:55 PM »

that would cause that too....

79coyotefrg · « **Reply #2599 on:** Sep 28, 2008, 06:37:53 PM »

its together

used the old bearing race from the pass side to drive the bearing on the locker side

see nice and clean and new races installed

it feels so nekkid like this

79coyotefrg · « **Reply #2600 on:** Sep 28, 2008, 06:42:23 PM »

i had a perfect pattern and had the backlash just PERFECT

notice anything missing $I\'m Down$

79coyotefrg · « **Reply #2601 on:** Sep 28, 2008, 06:51:33 PM »

ok, apparently everyone doesnt know

llamas · « **Reply #2602 on:** Sep 28, 2008, 07:21:38 PM »

thats important?

!!!!

Duffil · « **Reply #2603 on:** Sep 28, 2008, 07:25:36 PM »

its ok glen all you have to reset is BL it is no big deal. It's not like you wheel that hing anyway just leave the locking sleeve out. The bumps at the mall can't be that big.

THK Matt · « **Reply #2604 on:** Sep 28, 2008, 07:42:08 PM »

is that an e locker? that looks way different then my diff.

79coyotefrg · « **Reply #2605 on:** Sep 28, 2008, 07:49:04 PM »

yes its a elocker

and yes its IMPORTANT i event thought about pulling the fork but didnt

and here it is all lock tabbed and ready

i dont have a inch pound torque wrench but it took medium effort to turn with this stubby ratchet

Duffil · « **Reply #2606 on:** Sep 28, 2008, 08:06:28 PM »

Quote from: 79coyotefrg on Sep 28, 2008, 07:49:04 PM

i dont have a inch pound torque wrench but it took medium effort to turn with this stubby ratchet

79coyotefrg · « **Reply #2607 on:** Sep 29, 2008, 09:36:37 AM »

after checking ZUK's site, it appears this is a decent setting approx 2 ft pounds according to my pendulum torque wrench

79coyotefrg · « **Reply #2608 on:** Oct 02, 2008, 09:29:01 AM »

no surprise here lots of metal shavings on the drain plug

ITS IN

Big Thanks to my Chiropractor for coming over yesterday on his day off to stick that heavy sucker in the housing

i need to clean that shock off

YotaJosh · « **Reply #2609 on:** Oct 02, 2008, 11:20:45 AM »

Quote from: 79coyotefrg on Oct 02, 2008, 09:29:01 AM

Big Thanks to my Chiropractor for coming over yesterday on his day off to stick that heavy sucker in the housing

Lemme guess, you're going to his place tomorrow to "align" his spine from helping you with that 3rd?

Congrats on getting them in, now on to the front diff.

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

79coyotefrg [OP]

Related Topics