Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 10 Guests are viewing this topic.

Print
Go Down Pages 1 ... 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 ... 105
User actions

79coyotefrg

#2340
May 29, 2008, 05:34:47 PM
Quote from: Jordan7118 on May 29, 2008, 05:22:42 PM
:slap: The heck you thinkin?!! Oh... You're not  :yupyup:

Yep, the easy way out would be to stay on the street and drive a yuppie-mobile, but that's what makes us special - we're willing to see it through to wheeling  :yesnod:

Hang in there, Glen. It'll get worse before it gets better. Maybe you're on your way out  :biggthumpup: 

"Keep on keepin' on."  - Joe Dirt
im for sure hopin this is the "gets worse"   part,  :ack:   
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2341
June 01, 2008, 02:22:23 PM
:woohoo:  I WORKED ON THE TRUCK TODAY :woohoo:




i finished bolting down the bed and used a strap to position it squarely :psss:  didnt realize how badly warped the bed was :suprised:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

KDXSR5

#2342
June 01, 2008, 02:36:46 PM
:woohoo: Glad you are getting somewhere! :thumbs:

Rocksurfer

#2343
June 01, 2008, 05:15:20 PM
That's what happens when your frame gets pushed around, other parts do too.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

#2344
June 01, 2008, 05:44:44 PM
later on i might have to just break down and  build a flatbed/utility bed
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

KDXSR5

#2345
June 01, 2008, 06:38:26 PM
build one like dawgtoy (I think thats the right name)

79coyotefrg

#2346
June 01, 2008, 06:51:18 PM
Quote from: KDXSR5 on June 01, 2008, 06:38:26 PM
build one like dawgtoy (I think thats the right name)
his was the first i saw that i really liked
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2347
June 08, 2008, 02:57:35 PM
:smack:  i got it crooked :wall:



AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#2348
June 08, 2008, 03:29:40 PM
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#2349
June 14, 2008, 07:37:17 PM
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#2350
June 15, 2008, 05:46:58 AM
time 2 go wheeling :dunno:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

mudmaster

#2351
June 15, 2008, 08:36:06 AM
Lookin' good!!
Time to go wheelin!

79coyotefrg

#2352
June 15, 2008, 09:40:40 AM
:nope:  i gotta install some longer shackles up front,  the stock ones  are letting the spring eyes hit the frame,  and  i gotta mount some turn signals on the front  and wire them up temporarily until i get my front bumper mounted
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BUBBA

#2353
June 15, 2008, 11:24:02 AM
needs bigger tires  :qtip:
87 4runner 350 with custom dent package. 
My budget beater

Dr.Maxwe001

#2354
June 17, 2008, 02:04:40 PM
keep it going
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

Gittinit

#2355
June 18, 2008, 09:12:12 PM
Glen your bumper is coming along nicely. I set a platform down into the bumper slightly for the winch to sit on, then angled the sides up at the corners to help improve your approach angles. Next up is the tube for grill and headlight protection. I still don't know what to do about mounting this thing to your frame as the frame I have to mock everything from has no core support , grill, ect, so its kinda hard to tell exactly where it needs to sit on there.  :flamer:
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#2356
June 19, 2008, 08:31:21 AM
my grill is 8 inches  above the mount holes on the front of the cross member thing  that goes infront of the bottom of the radiator

also 2 1/2 inches above the  top of the body mountbracket
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#2357
June 19, 2008, 07:00:00 PM
How far forward in relation to the front crosmember is the lower edge of the grill where the back/top edge of the bumper should almost meet, the grill?

Dang I reread that and i confused myself. HUH????
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

V-Man

#2358
June 19, 2008, 07:14:27 PM
ok folks heres what he's not telling you..
http://i237.photobucket.com/albums/ff237/templefork/truck/hold/100_0570.jpg
and
http://i237.photobucket.com/albums/ff237/templefork/truck/hold/100_0571.jpg

And who could have help glen get it going just who could have done it???
Well really it was lots of people but this guy was happy to get a chance to get his hands dirty on the project.
http://i237.photobucket.com/albums/ff237/templefork/truck/hold/100_0572.jpg

KDXSR5

#2359
June 19, 2008, 07:16:01 PM
Quote from: V-Man on June 19, 2008, 07:14:27 PM
ok folks heres what he's not telling you..

and


And who could have help glen get it going just who could have done it???
Well really it was lots of people but this guy was happy to get a chance to get his hands dirty on the project.


:gap:

79coyotefrg

#2360
June 19, 2008, 07:21:48 PM
Quote from: Gittinit on June 19, 2008, 07:00:00 PM
How far forward in relation to the front crosmember is the lower edge of the grill where the back/top edge of the bumper should almost meet, the grill?

in relation to that cross member  um  1- 2 inches
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

KDXSR5

#2361
June 19, 2008, 07:28:33 PM
sooo... why have you been keeping this engine all top secret?

79coyotefrg

#2362
June 19, 2008, 07:53:49 PM
Quote from: KDXSR5 on June 19, 2008, 07:28:33 PM
sooo... why have you been keeping this engine all top secret?
engine??   what engine??  :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

V-Man

#2363
June 20, 2008, 05:45:00 AM Last Edit: June 20, 2008, 06:04:12 AM by V-Man
Quote from: 79coyotefrg on June 19, 2008, 07:53:49 PM
engine??   what engine??  :dunno:


Don't tell them anything glen...you know it top secert...
Oh ya here some one playing a tune on the old buzz box
http://s237.photobucket.com/albums/ff237/templefork/truck/?action=view&current=100_0563.flv

V-Man

#2364
June 20, 2008, 06:08:14 AM
Ladies and Gentlemen May I present to you one happy camper....
http://s237.photobucket.com/albums/ff237/templefork/truck/?action=view&current=100_0564.flv


   Sounds a little rough there glen...she maybe needs tuned up, or just exercised a bit

Dr.Maxwe001

#2365
June 20, 2008, 06:12:07 AM
its alive its alive and rolling
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

skipnrocks

#2366
June 20, 2008, 06:45:01 PM
Quote from: maxwe001 on June 20, 2008, 06:12:07 AM
its alive its alive and rolling
right on!!!
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

79coyotefrg

#2367
June 21, 2008, 05:13:15 PM
longer shackle made  and installed on the drivers side,  thats all i could get done so far :thud:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

#2368
June 22, 2008, 06:50:58 AM
omg it drives again!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

fordh8r

#2369
June 22, 2008, 07:58:17 AM
 :woohoo: :hyper: :rockingout:  Awesome, he does look happy.  :yupyup:
Print
Go Up Pages 1 ... 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 ... 105
User actions