Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 33 Guests are viewing this topic.

Print
Go Down Pages 1 ... 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 ... 105
User actions

79coyotefrg

#2400
June 29, 2008, 05:33:29 PM
:aaa:

its supposed to be nice tomorrow,  so i am gonna try and clean all the weld slag off the sliders  so they can be re installed
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2401
June 29, 2008, 06:54:02 PM
Vman  you got home  and posted those pics yet  :dunno:

not to mention the video
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#2402
June 29, 2008, 07:50:18 PM
OK Glen here are some pics of what I'm doing to your bumper. Keep in mind I am no where near done. Ill get back at it pretty soon.
getting started

1st set of mods complete

Oh and my work bench, is coming along as well.


Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#2403
June 29, 2008, 07:52:27 PM
OMG somebody stole the frame :willynilly:


AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2404
June 29, 2008, 07:53:50 PM
Quote from: Gittinit on June 29, 2008, 07:50:18 PM
OK Glen here are some pics of what I'm doing to your bumper. Keep in mind I am no where near done. Ill get back at it pretty soon.
getting started

1st set of mods complete


i see where my winch is going :woohoo:

glad i didnt sell those stock turn signals now :yesnod:

LOOKIN GOOD
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2405
June 29, 2008, 07:55:14 PM
OH, where you have the ground  in the first pic,  is that where it mounts to the front of the frame??
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#2406
June 29, 2008, 08:08:09 PM
yea. Yhats why I have been having issues figuring out a good way to mount it to your frame. I figure if I make a cross member of sorts to fit into the front of your frame, I could just make the bumper mount to that.  :headscratch:
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#2407
June 29, 2008, 08:18:51 PM
sounds good to me

i wish i could drive up on one of your days off, :down: 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#2408
June 30, 2008, 06:02:06 AM
That shure would make life easier. If you could we could knock out the bumper and the bed hoist thing in a day. I might could even borrow my buddys airconditioned shop so us fat boys wouldnt die in the heat.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#2409
July 04, 2008, 04:05:35 PM
well i fixed my drivers door  window today,  had  to pull the  inside off, anddig in :thud:

pics coming as soon as the sky clears :eek:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2410
July 04, 2008, 06:12:52 PM

the inner rail  was bent away from the glass,  i guess that happened in the wreck :dunno:



AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2411
July 04, 2008, 06:23:13 PM
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

CTENG in KS

#2412
July 04, 2008, 07:47:37 PM
Ooooo

Classy!

IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

79coyotefrg

#2413
July 04, 2008, 08:00:07 PM
yea  i bet that poor speaker doesnt last too long  :nerv:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Wermz84

#2414
July 04, 2008, 11:15:54 PM
Yeah, Ive got kinda big feet and I jump around quickly a lot of times.  So I always end up kicking speakers that are in the door.  Heck ive even kicked off my kicker panel getting in too quickly.     :cheese: 
I like to Drive!

Duffil

#2415
July 04, 2008, 11:16:57 PM
Quote from: Wermz84 on July 04, 2008, 11:15:54 PM
Yeah, Ive got kinda big feet and I jump around quickly a lot of times.  So I always end up kicking speakers that are in the door.  Heck ive even kicked off my kicker panel getting in too quickly.     :cheese: 
you need to lay off the meth, brotha...or at least find a different dealer. :yesnod:

Wermz84

#2416
July 04, 2008, 11:30:44 PM
Quote from: Duffil on July 04, 2008, 11:16:57 PM
you need to lay off the meth, brotha...or at least find a different dealer. :yesnod:

:rofl: Chicks dig it when you don't have any teeth.   :hahaha:
I like to Drive!

Duffil

#2417
July 04, 2008, 11:32:43 PM
maybe I should move to Santa Cruz then! :yupyup:

Wermz84

#2418
July 04, 2008, 11:36:50 PM
Quote from: Duffil on July 04, 2008, 11:32:43 PM
maybe I should move to Santa Cruz then! :yupyup:

:thumbsup: You'll get some for sure!


Sorry to defile your thread Glen.   :gap:
I like to Drive!

V-Man

#2419
July 05, 2008, 04:52:06 AM Last Edit: July 05, 2008, 05:06:51 AM by V-Man
ok folks here's what glens be waiting for....

oK one little adjustment..


got to get the aliment set.

 

And do you think he's learned his lesson?

V-Man

#2420
July 05, 2008, 05:04:37 AM
 :disturbed: And of course glen is very happy...
http://s237.photobucket.com/albums/ff237/templefork/glen/?action=view&current=100_0578.flv

:headscratch: hey glen what's that grinding noise...oh ya OIL... :shocking:

CTENG in KS

#2421
July 05, 2008, 06:01:56 AM
Thats a chop...video not real.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

79coyotefrg

#2422
July 05, 2008, 08:57:22 AM
VVRRRROOOOOMMMMMMMM  :disturbed:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#2423
July 05, 2008, 10:07:57 AM
glens poor belly :down:     it has restraint now.


lol i wish my alinment was that easy :rofl:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

KDXSR5

#2424
July 05, 2008, 11:01:42 AM
wow look at that little truck FLY by! Glad to see it going again Glen. :woohoo:

79coyotefrg

#2425
July 05, 2008, 11:38:04 AM
Quote from: unclejpl4x4 on July 05, 2008, 10:07:57 AM
glens poor belly :down:     it has restraint now.


lol i wish my alinment was that easy :rofl:
it is Joe,  put the front  on stands  pull the wheels,  it might not be able to get  as high on the rear but it would get you very close

caster camber  is  another thing :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

#2426
July 05, 2008, 12:19:32 PM
Quote from: unclejpl4x4 on July 05, 2008, 10:07:57 AM
glens poor belly :down:     it has restraint now.


lol i wish my alinment was that easy :rofl:


yeah screw IFS alignment!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

BUBBA

#2427
July 06, 2008, 09:11:28 AM
 :qtip: guess im gonna have to repaint my steering,can't be looking alike now can we.
87 4runner 350 with custom dent package. 
My budget beater

Rocksurfer

#2428
July 06, 2008, 10:15:57 AM
Quote from: unclejpl4x4 on July 05, 2008, 10:07:57 AM
glens poor belly :down:     it has restraint now.


lol i wish my alinment was that easy :rofl:

That belt makes Glen look thinner. :gap:  :outtahere:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

DanS

#2429
July 06, 2008, 07:37:35 PM
Quote from: V-Man on July 05, 2008, 05:04:37 AM
:disturbed: And of course glen is very happy...
http://s237.photobucket.com/albums/ff237/templefork/glen/?action=view&current=100_0578.flv

:headscratch: hey glen what's that grinding noise...oh ya OIL... :shocking:
Sounds great Glen, good work, keep it up
DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!
Print
Go Up Pages 1 ... 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 ... 105
User actions