Author Topic: CODY'S RUNNER *REDEMPTION** (Read 236491 times)

*** YELLER *** · « **Reply #330 on:** Sep 03, 2009, 03:55:03 PM »

PAGE 12 BELONGS TO **YELLER**

yes it is

brockbuilt85 · « **Reply #331 on:** Sep 03, 2009, 03:56:47 PM »

well, in those other empty spots on mine there are similar relay lookin deals, thats why i ask. i found a fuse diagram, and figured out which fuse is the hazards. ill swap that out first. then take this out and test it

brockbuilt85 · « **Reply #332 on:** Sep 03, 2009, 04:02:39 PM »

i want to go home and work on this thinG!!!

brockbuilt85 · « **Reply #333 on:** Sep 03, 2009, 05:01:27 PM »

monday trip depends on if i can fix fuel leak, blinker, and install locker before hand. the thing is a turd, soon as it its a hill it boggs down. flats gets up to 50 fine, but it does not like hills, which means i prolly have low compression. but it does not smoke so i dunno.

brockbuilt85 · « **Reply #334 on:** Sep 03, 2009, 05:10:33 PM »

Things i need done before MCR8-
must do:
Fix fuel leak

Install Locker
Fix Turn Signals

Rock Lights
Reverse Lights
Sliders

Should Do:
MAF Sensor Replace
Drain and Fill Front Axle
Do More on Front Bumper

Not Necessary:
Stereo
Interior stuff

Jeebus, plus im working graves and going to school till then.

brockbuilt85 · « **Reply #335 on:** Sep 03, 2009, 09:44:52 PM »

Things i need done before MCR8-
must do:
Fix fuel leak

Install Locker
~~Fix Turn Signals~~

weld tabs and put front ones on
Rock Lights
Reverse Lights
Sliders

Should Do:
MAF Sensor Replace
Drain and Fill Front Axle
Do More on Front Bumper

Not Necessary:
Stereo
mount fire extinguisher
tear out old speakers
re install panels
cover tail gate with something

brockbuilt85 · « **Reply #336 on:** Sep 04, 2009, 08:47:27 PM »

Things i need done before MCR8-
must do:
~~Fix fuel leak~~

Install Locker
~~Fix Turn Signals~~

weld tabs and put front ones on
Rock Lights
Reverse Lights
Sliders

Should Do:
~~MAF Sensor Replace~~ replaced it, still does the same thing
Drain and Fill Front Axle
Do More on Front Bumper

Not Necessary:
Stereo
mount fire extinguisher
tear out old speakers
re install panels
cover tail gate with something

i hear some sort of vacuum, but i cant figure out where its coming from

*** YELLER *** · « **Reply #337 on:** Sep 05, 2009, 10:06:49 AM »

dig thru all that EFI crap and fix yer

brockbuilt85 · « **Reply #338 on:** Sep 05, 2009, 09:28:33 PM »

Things i need done before MCR8-
must do:
~~Fix fuel leak~~
Install Locker
~~Fix Turn Signals weld tabs and put front ones on~~
Rock Lights
Reverse Lights
Sliders

Should Do:
~~MAF Sensor Replace replaced it~~, still does the same thing
Drain and Fill Front Axle
Do More on Front Bumper

Not Necessary:
cb
Stereo
mount fire extinguisher
tear out old speakers
re install panels
cover tail gate with something

my first attempts at welding

cb installed

Tallchevy · « **Reply #339 on:** Sep 06, 2009, 01:57:32 AM »

Quote from: brockbuilt85 on Sep 05, 2009, 09:28:33 PM

my first attempts at welding

Always pratice welding on scrap, never on the parts you want welded together. Cut it off & grind it flat.

brockbuilt85 · « **Reply #340 on:** Sep 06, 2009, 08:08:54 AM »

Quote from: Tallchevy on Sep 06, 2009, 01:57:32 AM

Always pratice welding on scrap, never on the parts you want welded together. Cut it off & grind it flat.

well, the thing is that there were gaps, and so i kinda just filled it in. hit it a few times with a BFH, it aint goin anywhere and its not all that visible, so i really dont care what it looks like.

Tallchevy · « **Reply #341 on:** Sep 06, 2009, 10:54:15 AM »

Quote from: brockbuilt85 on Sep 06, 2009, 08:08:54 AM

well, the thing is that there were gaps, and so i kinda just filled it in. hit it a few times with a BFH, it aint goin anywhere and its not all that visible, so i really dont care what it looks like.

You should've just glued it on with some bubble gum

brockbuilt85 · « **Reply #342 on:** Sep 06, 2009, 09:59:13 PM »

Quote from: Tallchevy on Sep 06, 2009, 10:54:15 AM

You should've just glued it on with some bubble gum

it looks like poo, but its not going anywhere. nough said.

got my locker put together tonight, will be in tomorrow

Slolyfe · « **Reply #343 on:** Sep 06, 2009, 10:27:19 PM »

Quote from: brockbuilt85 on Sep 06, 2009, 09:59:13 PM

it looks like poo, but its not going anywhere. nough said.

got my locker put together tonight, will be in tomorrow

*** YELLER *** · « **Reply #344 on:** Sep 06, 2009, 10:48:09 PM »

good luck buddy

brockbuilt85 · « **Reply #345 on:** Sep 06, 2009, 11:46:36 PM »

Quote from: **YELLER** on Sep 06, 2009, 10:48:09 PM

good luck buddy

the hardest part is over, taking the diff apart. its all back together, just was getting too late to stick it back in. should only take a lil bit. then its on to the next project.

*** YELLER *** · « **Reply #346 on:** Sep 07, 2009, 04:43:48 PM »

:fingerscrossed:

brockbuilt85 · « **Reply #347 on:** Sep 07, 2009, 08:44:50 PM »

locker in and seems to be working correctly, as i did follow the directions to the letter. even went onlin and got some toyota specific ones. got one set of front rock lights in, thinking thats gonna be all for this trip. also installed turn signals. got a trailer and truck, so i will be riding the durtymax to the con!

brockbuilt85 · « **Reply #348 on:** Sep 08, 2009, 02:33:46 PM »

Things i need done before MCR8-
must do:
Fix fuel leak
Install Locker
Fix Turn Signals weld tabs and put front ones on
Rock Lights
Reverse Lights
Sliders

Should Do:
~~MAF Sensor Replace~~ replaced it, still does the same thing
~~Drain and Fill Front Axle~~
Do More on Front Bumper- not gonna happen this trip

Not Necessary:
cb
Stereo-?

??
~~mount fire extinguisher~~
tear out old speakers
re install panels
cover tail gate with something-not gonna happen this trip

ROCKO · « **Reply #349 on:** Sep 08, 2009, 02:36:20 PM »

so is this thing going to be at the round up?

brockbuilt85 · « **Reply #350 on:** Sep 08, 2009, 02:38:02 PM »

Quote from: ROCKO on Sep 08, 2009, 02:36:20 PM

so is this thing going to be at the round up?

yup! hey do you still have those rear panels? do you have the lil doors on them? you know where you can acess the wiper bladder and such? cause i need them

brockbuilt85 · « **Reply #351 on:** Sep 08, 2009, 02:39:49 PM »

well, ill take the whole set up actually

brockbuilt85 · « **Reply #352 on:** Sep 08, 2009, 02:46:54 PM »

just looked and my EQ should be on my front door when i get home, may just throw a stereo together yet!

ROCKO · « **Reply #353 on:** Sep 08, 2009, 02:51:29 PM »

Quote from: brockbuilt85 on Sep 08, 2009, 02:38:02 PM

yup! hey do you still have those rear panels? do you have the lil doors on them? you know where you can acess the wiper bladder and such? cause i need them

all that stuff is in my garage....i will pm my address to you and you could pick it up......

brockbuilt85 · « **Reply #354 on:** Sep 08, 2009, 02:55:41 PM »

in antioch right? no bringy to round upy?

ROCKO · « **Reply #355 on:** Sep 08, 2009, 03:07:30 PM »

Quote from: brockbuilt85 on Sep 08, 2009, 02:55:41 PM

in antioch right? no bringy to round upy?

wont have the room in my truck to bring it....but if i do i will bring it

brockbuilt85 · « **Reply #356 on:** Sep 08, 2009, 03:09:26 PM »

Quote from: ROCKO on Sep 08, 2009, 03:07:30 PM

wont have the room in my truck to bring it....but if i do i will bring it

sweeeet. otherwise ill have to wait till i can get some time off

brockbuilt85 · « **Reply #357 on:** Sep 08, 2009, 10:25:40 PM »

Things i need done before MCR8-
must do:
Fix fuel leak
Install Locker
Fix Turn Signals weld tabs and put front ones on
Rock Lights
Reverse Lights
Sliders

Should Do:
~~MAF Sensor Replace~~ replaced it, still does the same thing
~~Drain and Fill Front Axle~~
Do More on Front Bumper- not gonna happen this trip

Not Necessary:
cb
Stereo-have all the parts, dont know if ill get it done
mount fire extinguisher
tear out old speakers
re install panels
cover tail gate with something-not gonna happen this trip

here is what i have for a stereo situation- planet audio EQ (had a memphis one ordered but it got lost in the mail, got this one dirt cheap because of it)
zapco reds with components
memphis 12" sub
two amps

Tallchevy · « **Reply #358 on:** Sep 08, 2009, 11:57:33 PM »

What side panels do you need? The ones from just behind the rear seat to the tailgate? What color?

brockbuilt85 · « **Reply #359 on:** Sep 09, 2009, 10:47:41 AM »

Quote from: Tallchevy on Sep 08, 2009, 11:57:33 PM

What side panels do you need? The ones from just behind the rear seat to the tailgate? What color?

yea, i really just need the lil door near the tail gate. but rocko wants to get rid of his so i might as well take the whole thing. you got some you wanna give away?? ill take those too

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

Related Topics

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]