Author Topic: CODY'S RUNNER *REDEMPTION** (Read 236469 times)

Wermz84 · « **Reply #390 on:** Sep 15, 2009, 04:42:27 PM »

Quote from: brockbuilt85 on Sep 15, 2009, 04:26:31 PM

this kit says it includes "knuckle bearings"
those are not the same?
http://www.all-prooff-road.peachhost.com/ct_PR6600-ap.htm

Knuckle bearings are Trunion bearings.

looks like it has everything but wheel bearings.

Quote from: brockbuilt85 on Sep 15, 2009, 04:08:05 PM

how much did they run? or do you know?

I just looked, my friend payed around $110

*** YELLER *** · « **Reply #391 on:** Sep 15, 2009, 05:03:12 PM »

'cause Marlin dont sell them...

brockbuilt85 · « **Reply #392 on:** Sep 15, 2009, 05:18:01 PM »

so one of those kits plus wheel bearings, sweet. i might have to take over the parents garage again.

brockbuilt85 · « **Reply #393 on:** Sep 15, 2009, 05:23:23 PM »

so its lookin like 250ish to rebuild the axle, and fuel problem still undetermined, but pumps less than 100, not too bad.m while i have those axles out i wish i could do a front locker......

MiniSimp · « **Reply #394 on:** Sep 16, 2009, 07:08:52 AM »

Quote from: brockbuilt85 on Sep 15, 2009, 05:23:23 PM

so its lookin like 250ish to rebuild the axle, and fuel problem still undetermined, but pumps less than 100, not too bad.m while i have those axles out i wish i could do a front locker......

Looks like $160 for everything you need on the front axle from Marlin http://www.marlincrawler.com/axle/front-axle-parts/knuckle-service-kit-wheel-bearings

Wermz84 · « **Reply #395 on:** Sep 16, 2009, 08:40:36 AM »

they have them back in stock? Sweet!

Nobody had any when i did mine. $I\'m Down$

brockbuilt85 · « **Reply #396 on:** Sep 16, 2009, 10:40:42 AM »

oh sick, they have them in stock now! ordering tonight!

brockbuilt85 · « **Reply #397 on:** Sep 17, 2009, 11:34:05 AM »

kit ordered! i think i might test the fuel pump sunday, make sure that is indeed my problem there.

brockbuilt85 · « **Reply #398 on:** Sep 19, 2009, 07:30:39 PM »

ordered fuel pump and all the filter/socks/gaskets that go with it. get it running, move it somewhere easy to work on it, rebuild the front end.

*** YELLER *** · « **Reply #399 on:** Sep 21, 2009, 11:45:28 AM »

SUBRAT I told you it wouldnt hold with out the bracing to the frame

subbrat · « **Reply #400 on:** Sep 21, 2009, 06:40:35 PM »

Ouch some one lost tug of war game. That will need lots more bracing ya did not get to finish front bumper. Thanks to a fall from my bike.

*** YELLER *** · « **Reply #401 on:** Sep 21, 2009, 07:06:35 PM »

cody if ya wanna bring it back over we can fix it

brockbuilt85 · « **Reply #402 on:** Sep 21, 2009, 10:55:08 PM »

yea, maybe ill coast it there. it will all work out. not really in the mood to deal with this POS at the moment.

fordh8r · « **Reply #403 on:** Sep 21, 2009, 11:27:13 PM »

Quote from: brockbuilt85 on Sep 21, 2009, 10:55:08 PM

yea, maybe ill coast it there. it will all work out. not really in the mood to deal with this POS at the moment.

Don't you live downhill from Dave?

Tallchevy · « **Reply #404 on:** Sep 21, 2009, 11:44:19 PM »

Dave will have to winch him up

brockbuilt85 · « **Reply #405 on:** Sep 22, 2009, 03:56:23 PM »

just waiting for parts right now. when i get the fuel going and the axle rebuilt then i will worry about the bumper. wish i had the money to throw a locker in there while its all apart....

brockbuilt85 · « **Reply #406 on:** Sep 22, 2009, 04:03:50 PM »

oh yea, my clutch engages and disingages really close to the floor, how can i adjust that?

*** YELLER *** · « **Reply #407 on:** Sep 22, 2009, 04:09:36 PM »

1. fluid
2. blead the slave Cyl.
3 adjust

Glad I could help

that is all

brockbuilt85 · « **Reply #408 on:** Sep 22, 2009, 04:28:57 PM »

what are your thoughts on running a spool up front? i mean because on street i would be in 2wd and hubs unlocked would i be ok doing that?
discuss

Wermz84 · « **Reply #409 on:** Sep 22, 2009, 04:31:49 PM »

Great if your only going to go in a straight line. If you plan on ever wanting to turn however i would think about a selectable locker up front.

brockbuilt85 · « **Reply #410 on:** Sep 22, 2009, 04:33:53 PM »

im guessin spools are not for the front? i didnt know, all i know is that they are cheaper and im broke

Slolyfe · « **Reply #411 on:** Sep 22, 2009, 04:39:06 PM »

Quote from: brockbuilt85 on Sep 22, 2009, 04:33:53 PM

im guessin spools are not for the front? i didnt know, all i know is that they are cheaper and im broke

I have a detroit easy locker for sale. Its in good condition but i broke 2 out of the 4 pins that lock it and they dont make parts for it anymore. So i went to a machine shop and got steel dowels that fit correctly. Ill sell it for 100 plus shipping.

brockbuilt85 · « **Reply #412 on:** Sep 22, 2009, 04:40:31 PM »

oh snap. you makin me an offer i cant refuse!
you take the paypal?

brockbuilt85 · « **Reply #413 on:** Sep 22, 2009, 04:45:05 PM »

looks like i need to go to the bay area, carlos, you still got that steering wheel? and i need to go to rockos. jeebus thats a long day!

Slolyfe · « **Reply #414 on:** Sep 22, 2009, 04:53:08 PM »

Quote from: brockbuilt85 on Sep 22, 2009, 04:40:31 PM

oh snap. you makin me an offer i cant refuse!
you take the paypal?

Yep paypal is good. give me a call I'll give you all the details of the locker.

brockbuilt85 · « **Reply #415 on:** Sep 22, 2009, 04:56:02 PM »

Quote from: slolyfe on Sep 22, 2009, 04:53:08 PM

Yep paypal is good. give me a call I'll give you all the details of the locker.

pm me your number porfavor

*** YELLER *** · « **Reply #416 on:** Sep 22, 2009, 04:56:48 PM »

I GOT HIS NUMBER ITS........ $That\'s Gay$

brockbuilt85 · « **Reply #417 on:** Sep 22, 2009, 04:59:57 PM »

ill call you when i get home, should be in a few hours.

Tallchevy · « **Reply #418 on:** Sep 22, 2009, 05:16:12 PM »

I still have the wheel. When you coming out? I work in Oakland & can swing by & pick up the locker as long as it's paid for & ok it's with slolyfe. I don't live in Fremont so you shouldn't get a ticket this time

TIMS89CRAWLER · « **Reply #419 on:** Sep 22, 2009, 05:26:10 PM »

I run a welded front end and my rig turns just fine with 38.5 sx's

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

Related Topics

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]