Author Topic: CODY'S RUNNER *REDEMPTION** (Read 239167 times)

*** YELLER *** · « **Reply #270 on:** Aug 06, 2009, 02:18:56 PM »

PAGE OWNAGE BY **YELLER**

JUST FOR CHRIS

Quote from: brockbuilt85 on Aug 05, 2009, 10:06:55 PM

took my drivelines to Marty Built today. also got drain plugs, and bolts for the shifters, oil for the trans/transfercases. still runs a lil rough, but i need to put some plugs in it, see what that does, and put the real exhaust i have on it. wish i knew how to weld worth a so i could get some of that started, i feel like im behind the 8 ball as far as the roundup goes. geesh!

you are

wish I had my welder so i could weld it for you

brockbuilt85 · « **Reply #271 on:** Aug 06, 2009, 04:46:45 PM »

Quote from: **YELLER** on Aug 06, 2009, 02:18:56 PM

PAGE OWNAGE BY **YELLER**

JUST FOR CHRIS

you are wish I had my welder so i could weld it for you

ill bring my parents welder over if your gonna be around this weekend.

*** YELLER *** · « **Reply #272 on:** Aug 06, 2009, 05:24:19 PM »

wheelin on Sat with Juls, Rich and Monica @ Niagara but Subday I should have time

brockbuilt85 · « **Reply #273 on:** Aug 08, 2009, 05:29:14 PM »

brockbuilt85 · « **Reply #274 on:** Aug 12, 2009, 07:51:17 PM »

Quote from: subbrat on Jul 29, 2009, 05:22:37 PM

The next two week ends are full I have to go get the willys and re smog the camaro for the trade. After that looks good.

sooooo, hows this or next weekend???

*** YELLER *** · « **Reply #275 on:** Aug 13, 2009, 06:54:16 PM »

this is cody on daves computer
the good-
old windshield out, and a little to easy to do so i might add...

shifters all installed...

back and front cleaned out of crack head mess...

put the door panel back on...

the bad-
front axle appears to be leaking out of passenger side knuckle

brockbuilt85 · « **Reply #276 on:** Aug 16, 2009, 05:17:18 PM »

new exauhst gasket, plugs. still running a lil rough.
worke on getting the old windshield gasket out, pain in the butt, but got most of it out, i also put on the grill, and discovered some lighting issues i will have to adjust.

brockbuilt85 · « **Reply #277 on:** Aug 20, 2009, 10:18:28 AM »

vacuumed it out, found plugs to fix lights, ordered EQ/CB antenna. filled transfercase with oil, sent out rear driveline(should be back by this weeekend) front driveline is in the process of being built. put grill on.

ROCKO · « **Reply #278 on:** Aug 20, 2009, 10:30:02 AM »

i have all the rear intorier parts if you need them...looks good by the way

brockbuilt85 · « **Reply #279 on:** Aug 20, 2009, 10:38:23 AM »

Quote from: ROCKO on Aug 20, 2009, 10:30:02 AM

i have all the rear intorier parts if you need them...looks good by the way

do you have the drivers side panel that is right behind the drivers seat, the one with the lil cubby? cause i never notices but the moron that had it before cut some kind of speaker hole in it, now the metal behind it is all jagged and crap so i wanted to try to cover it up. i have all the other rear stuff, but im not sure if im gonna use it yet.

ROCKO · « **Reply #280 on:** Aug 20, 2009, 10:43:50 AM »

Quote from: brockbuilt85 on Aug 20, 2009, 10:38:23 AM

do you have the drivers side panel that is right behind the drivers seat, the one with the lil cubby? cause i never notices but the moron that had it before cut some kind of speaker hole in it, now the metal behind it is all jagged and crap so i wanted to try to cover it up. i have all the other rear stuff, but im not sure if im gonna use it yet.

no those panels are the only ones im leaving in the truck.....see if steve_925 has that panel im sure he does

Tallchevy · « **Reply #281 on:** Aug 20, 2009, 11:12:25 AM »

Sweet, looks like your gonna drive it soon

Quote from: brockbuilt85 on Aug 20, 2009, 10:18:28 AM

ordered EQ/CB antenna.

Wermz84 · « **Reply #282 on:** Aug 20, 2009, 11:20:38 AM »

Quote from: Tallchevy on Aug 20, 2009, 11:12:25 AM

That is so he can Bump the Squelch!

brockbuilt85 · « **Reply #283 on:** Aug 20, 2009, 09:29:42 PM »

Quote from: ROCKO on Aug 20, 2009, 10:43:50 AM

no those panels are the only ones im leaving in the truck.....see if steve_925 has that panel im sure he does

k, i would leave it but there is nasty jagged edges, ill ask him, or just cover it with something else.

Quote from: Wermz84 on Aug 20, 2009, 11:20:38 AM

That is so he can Bump the Squelch!

hells yea, lol
what i ment is i ordered a cb antenna and a EQ.
today:
fixed tailgate so it latches on both sides.
installed center consol.
fixed ghetto wiring so i have a passenger blinker and running light.

brockbuilt85 · « **Reply #284 on:** Aug 20, 2009, 09:31:59 PM »

my GF helping me tear out the old carpet. had bugs and all kinds of nastyness. she also vacuumed.

*** YELLER *** · « **Reply #285 on:** Aug 22, 2009, 07:17:55 PM »

get aholdof subrat and have him bring up the bender and stuff so we can make some sorta rear bumper and fix the front

brockbuilt85 · « **Reply #286 on:** Aug 25, 2009, 09:02:08 PM »

picked up a locker today
did some wiring for lights/cb
cleaned a lil more
dave figured out how we are gonna mount my cb antenna, and its gonna be nice.
more tomorrow
REAR DRIVELINE TOMORROW!

Wermz84 · « **Reply #287 on:** Aug 25, 2009, 09:26:21 PM »

Sooo Close!

brockbuilt85 · « **Reply #288 on:** Aug 25, 2009, 09:28:39 PM »

i know, im almost there, i can smell it.
oh subrat is coming over friday to adjust my motor, and work on my front bumper, and im gonna learn how to weld!

brockbuilt85 · « **Reply #289 on:** Aug 26, 2009, 08:45:30 PM »

bought a fuse block to make all my wiring pretty

me starting the ratchet strap battery tie down

new windshield

new driveline, got the front one tonight, putting it in tomorrow!

my beautiful GF posing next to the tube doors she and her parents gave me for my birthday.

center consil

than this happened
http://s45.photobucket.com/albums/f91/shakabootie/?action=view&current=MVI_1673.flv

Tallchevy · « **Reply #290 on:** Aug 26, 2009, 11:59:28 PM »

Sweet, you got it running & moving

Then as you passed Daves jeep (heep in spanish) I heard this horrible sound

Then I realized it was Daves heep that was running. Way to ruin Cody's video Dave

brockbuilt85 · « **Reply #291 on:** Aug 27, 2009, 08:49:19 AM »

Quote from: Tallchevy on Aug 26, 2009, 11:59:28 PM

Sweet, you got it running & moving Then as you passed Daves jeep (heep in spanish) I heard this horrible sound Then I realized it was Daves heep that was running. Way to ruin Cody's video Dave

haha i know right?
here is another one my GF took
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=62471913

brockbuilt85 · « **Reply #292 on:** Aug 27, 2009, 09:24:58 PM »

did some more stuff today-
brought my driveline over and painted the welds, didnt install tho

installed cage

and painted my tube doors

installed switches for rock lights. tried to hook up cb, but it does not work, so ill have to get another one

*** YELLER *** · « **Reply #293 on:** Aug 27, 2009, 10:08:40 PM »

what 'bout da antena mount.....

brockbuilt85 · « **Reply #294 on:** Aug 28, 2009, 08:20:23 AM »

Quote from: **YELLER** on Aug 27, 2009, 10:08:40 PM

what 'bout da antena mount.....

i didnt want to take a picture of it with my cell phone, its only 2 MP and would not capture the total awesomeness that is the antenna mount.

brockbuilt85 · « **Reply #295 on:** Aug 28, 2009, 08:16:02 PM »

Subrat came over and worked on my motor a lil, found a couple of problems, one is i gotta fix the cold start ignitor. he also welded my bumper on, looks awesome! ill post pics soon.

*** YELLER *** · « **Reply #296 on:** Aug 30, 2009, 01:00:13 PM »

*** YELLER *** · « **Reply #297 on:** Aug 30, 2009, 01:06:42 PM »

http://www.youtube.com/watch?v=iHPWqzCKeXE

jrock · « **Reply #298 on:** Aug 30, 2009, 01:58:40 PM »

That's a big stinger! hehe

brockbuilt85 · « **Reply #299 on:** Aug 30, 2009, 05:32:36 PM »

Quote from: **YELLER** on Aug 30, 2009, 01:06:42 PM

http://www.youtube.com/watch?v=iHPWqzCKeXE

for your making fun of my crawler, he can hear you, dont hurt his feelings!

so here is the deal, wont start cold, so i went through a bunch of stuff, cleaned connectors etc. all the sudden, it starts, but when i give it gas, it trys to die. well i forgot to plug the MAF sensor plug back in, so i do, turn it off, wont restart. then i unplug the MAF sensor, turn it over, fires right up. then plug in the sensor, give it a lil rev, and shes good to go. wierd eh?

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

*** YELLER *** [OP]

Related Topics

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]

* YELLER * [OP]