***CODY'S RUNNER*** *REDEMPTION**

[*** YELLER ***]

PAGE OWNAGE BY **YELLER**

JUST FOR CHRIS

took my drivelines to Marty Built today. also got drain plugs, and bolts for the shifters, oil for the trans/transfercases. still runs a lil rough, but i need to put some plugs in it, see what that does, and put the real exhaust i have on it. wish i knew how to weld worth a so i could get some of that started, i feel like im behind the 8 ball as far as the roundup goes. geesh!

you are   wish I had my welder so i could weld it for you  

[brockbuilt85]

PAGE OWNAGE BY **YELLER**

JUST FOR CHRIS




you are  wish I had my welder so i could weld it for you 

ill bring my parents welder over if your gonna be around this weekend.

[*** YELLER ***]

wheelin on Sat with Juls, Rich and Monica @ Niagara but Subday I should have time

[brockbuilt85]

 

[brockbuilt85]

The next two week ends are full I have to go get the willys and re smog the camaro for the trade. After that looks good.

sooooo, hows this or next weekend???

[*** YELLER ***]

this is cody on daves computer
the good-
old windshield out, and a little to easy to do so i might add...

shifters all installed...

back and front cleaned out of crack head mess...

put the door panel back on...


the bad-
front axle appears to be leaking out of passenger side knuckle  

[brockbuilt85]

new exauhst gasket, plugs. still running a lil rough.
worke on getting the old windshield gasket out, pain in the butt, but got most of it out, i also put on the grill, and discovered some lighting issues i will have to adjust.

[brockbuilt85]

vacuumed it out, found plugs to fix lights, ordered EQ/CB antenna. filled transfercase with oil, sent out rear driveline(should be back by this weeekend) front driveline is in the process of being built. put grill on.

[ROCKO]

i have all the rear intorier parts if you need them...looks good by the way

[brockbuilt85]

i have all the rear intorier parts if you need them...looks good by the way

do you have the drivers side panel that is right behind the drivers seat, the one with the lil cubby? cause i never notices but the moron that had it before cut some kind of speaker hole in it, now the metal behind it is all jagged and crap so i wanted to try to cover it up. i have all the other rear stuff, but im not sure if im gonna use it yet.

[ROCKO]

do you have the drivers side panel that is right behind the drivers seat, the one with the lil cubby? cause i never notices but the moron that had it before cut some kind of speaker hole in it, now the metal behind it is all jagged and crap so i wanted to try to cover it up. i have all the other rear stuff, but im not sure if im gonna use it yet.

no those panels are the only ones im leaving in the truck.....see if steve_925 has that panel im sure he does

[Tallchevy]

Sweet, looks like your gonna drive it soon 

ordered EQ/CB antenna.

[Wermz84]

That is so he can Bump the Squelch! 

[brockbuilt85]

no those panels are the only ones im leaving in the truck.....see if steve_925 has that panel im sure he does

k, i would leave it but there is nasty jagged edges, ill ask him, or just cover it with something else.

That is so he can Bump the Squelch!  

hells yea, lol
what i ment is i ordered a cb antenna and a EQ.
today:
fixed tailgate so it latches on both sides.
installed center consol.
fixed ghetto wiring so i have a passenger blinker and running light.

[brockbuilt85]

my GF helping me tear out the old carpet. had bugs and all kinds of nastyness.  she also vacuumed.

[*** YELLER ***]

get aholdof subrat and have him bring up the bender and stuff so we can make some sorta rear bumper and fix the front

[brockbuilt85]

picked up a locker today
did some wiring for lights/cb
cleaned a lil more
dave figured out how we are gonna mount my cb antenna, and its gonna be nice.
more tomorrow
REAR DRIVELINE TOMORROW!

[Wermz84]

Sooo Close! 

[brockbuilt85]

i know, im almost there, i can smell it.
oh subrat is coming over friday to adjust my motor, and work on my front bumper, and im gonna learn how to weld!

[brockbuilt85]

bought a fuse block to make all my wiring pretty

me starting the ratchet strap battery tie down

new windshield

new driveline, got the front one tonight, putting it in tomorrow!

my beautiful GF posing next to the tube doors she and her parents gave me for my birthday.




center consil

than this happened
http://s45.photobucket.com/albums/f91/shakabootie/?action=view&current=MVI_1673.flv

[Tallchevy]

Sweet, you got it running & moving  Then as you passed Daves jeep (heep in spanish) I heard this horrible sound  Then I realized it was Daves heep that was running. Way to ruin Cody's video Dave 

[brockbuilt85]

Sweet, you got it running & moving  Then as you passed Daves jeep (heep in spanish) I heard this horrible sound  Then I realized it was Daves heep that was running. Way to ruin Cody's video Dave 

haha i know right?
here is another one my GF took
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=62471913

[brockbuilt85]

did some more stuff today-
brought my driveline over and painted the welds, didnt install tho

installed cage and painted my tube doors



installed switches for rock lights. tried to hook up cb, but it does not work, so ill have to get another one

[*** YELLER ***]

what 'bout da antena mount.....

[brockbuilt85]

what 'bout da antena mount.....

i didnt want to take a picture of it with my cell phone, its only 2 MP and would not capture the total awesomeness that is the antenna mount.

[brockbuilt85]

Subrat came over and worked on my motor a lil, found a couple of problems, one is i gotta fix the cold start ignitor. he also welded my bumper on, looks awesome! ill post pics soon.

[*** YELLER ***]

 

[*** YELLER ***]

 


http://www.youtube.com/watch?v=iHPWqzCKeXE

[jrock]

That's a big stinger! hehe

[brockbuilt85]

http://www.youtube.com/watch?v=iHPWqzCKeXE

for your making fun of my crawler, he can hear you, dont hurt his feelings!

so here is the deal, wont start cold, so i went through a bunch of stuff, cleaned connectors etc. all the sudden, it starts, but when i give it gas, it trys to die. well i forgot to plug the MAF sensor plug back in, so i do, turn it off, wont restart. then i unplug the MAF sensor, turn it over, fires right up. then plug in the sensor, give it a lil rev, and shes good to go. wierd eh?