***CODY'S RUNNER*** *REDEMPTION**

Started by *** YELLER ***, October 19, 2008, 07:41:25 PM

0 Members and 1 Guest are viewing this topic.

unclejpl4x4

I here ya  do to work i was forced to work on my moter after 7pm till 9 -1 am  in below 35 temps let me tell ya it sucked
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

brockbuilt85

so here is the goal, get everything in and running so i can go to the rim trail for the 4th (assuming i get the time off and so on).
should not be impossible.
:thumbs:
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Tallchevy

Did you get the idler pulley yet?
:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3

brockbuilt85

When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

fordh8r


brockbuilt85

When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

brockbuilt85

Quote from: **YELLER** on May 19, 2009, 08:46:09 PM

guess i should have checked that today

check it tomorrow please :gap:
i might have the engine ready this week while everyone is having fun.
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

fordh8r

Quote from: **YELLER** on May 19, 2009, 08:46:09 PM

guess i should have checked that today
Cody --->  :slap:  <--- Dave..................Me---->  :haha:

Tallchevy

I got the idler back today  :headscratch: Did you move Dave :dunno: I'll send you a PM with the address you gave me.
:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3

brockbuilt85

Quote from: Tallchevy on May 20, 2009, 02:00:40 PM
I got the idler back today  :headscratch: Did you move Dave :dunno: I'll send you a PM with the address you gave me.
:willynilly:
you have pm
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Duffil

You have no idea how glad you should be you aren't having a shop do this. This tcase is soooo caked in crap  :stopit:
I should charge you by the hour.

*** YELLER ***

Quote from: Duffil on May 26, 2009, 08:12:58 PM
You have no idea how glad you should be you aren't having a shop do this. This tcase is soooo caked in crap  :stopit:
I should charge you by the hour.

Is there anyway i can get as set of the gears we talked about before friday ???
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Duffil

Quote from: **YELLER** on May 26, 2009, 08:33:32 PM
Is there anyway i can get as set of the gears we talked about before friday ???
Can you come down here and get them? I couldn't find a set in my garage but I have them somewhere and I have like 3 sets in storage.

brockbuilt85

Quote from: Duffil on May 26, 2009, 08:12:58 PM
You have no idea how glad you should be you aren't having a shop do this. This tcase is soooo caked in crap  :stopit:
I should charge you by the hour.
put it in your dishwasher and be done with it!
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

brockbuilt85

Quote from: Duffil on May 26, 2009, 08:12:58 PM
You have no idea how glad you should be you aren't having a shop do this. This tcase is soooo caked in crap  :stopit:
I should charge you by the hour.
and i am glad your doing it instead of a shop, trust me, the blue beast threw 4 codes on the way home. im not very happy right now.
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Duffil

Quote from: brockbuilt85 on May 26, 2009, 08:42:27 PM
put it in your dishwasher and be done with it!
nope. that is reserved for my parts only.

brockbuilt85

Quote from: Duffil on May 26, 2009, 08:51:13 PM
nope. that is reserved for my parts only.
and daves, ive seen it. there is video. post pics of that turd, so everyone can see what your dealing with :gap:
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Duffil

its a dirty, crusty smemga infested rank ass tcase you didn't bother to clean before giving it to me. nuff said.

*** YELLER ***

Quote from: Duffil on May 26, 2009, 08:39:30 PM
Can you come down here and get them? I couldn't find a set in my garage but I have them somewhere and I have like 3 sets in storage.

yes i can let me know what you find
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

brockbuilt85

Quote from: Duffil on May 26, 2009, 09:01:20 PM
its a dirty, crusty smemga infested rank ass tcase you didn't bother to clean before giving it to me. nuff said.
when i borrowed my buddies pressure washer it slipped my mind. you should have seen the trans and motor, the tcase was better.
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

unclejpl4x4

are U still trying to clean them ?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

brockbuilt85

Quote from: Ünclej on May 28, 2009, 06:18:53 PM
are U still trying to clean them ?
they are as clean as they are gonna get, im working on getting the engine back to gethere and in, or i will work on that when i get some time off. so like monday or sometime after that
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Tallchevy

Here's a pic of the idler I gave Cody. I told you I cleaned & painted it.
:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3


unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

fordh8r

Quote from: ÜncleĴ on June 06, 2009, 06:01:07 PM
:stopit:
What'dya mean? It's "Mystery Machine" worthy.  :yupyup:


:psss: FYI....that's the actual idler he sent him. I would know, I was there when he painted it.  :cheese:  :rofl2:

brockbuilt85

When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Bazzi

4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

unclejpl4x4

:rofl:       thats definite one of a kind   but U got make your PS pully a daisy
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly