A.J.'s Runner - "Please Stand-by"...Product Review

Started by CTENG in KS, July 14, 2004, 01:22:37 PM

0 Members and 15 Guests are viewing this topic.

Print
Go Down Pages 1 ... 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 ... 56
User actions

CTENG in KS

#360
June 11, 2006, 05:29:46 PM
Hmmm, new seal! NO MORE LEAKY!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#361
June 11, 2006, 05:30:50 PM
MMMM, new flywheel...pretty!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#362
June 11, 2006, 05:33:19 PM
MMM, new clutch...just a note, the Seko clutch plates are not labeled so don't forget the flat side goes against the flywheel!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#363
June 11, 2006, 05:35:58 PM
Throw-out bearing was being a PAIN so it met with Mr Grinder...
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#364
June 11, 2006, 05:39:08 PM
Getting set up...what you can't see is me beind the camera doing tai chi and readying my pythons for transmission installation.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#365
June 11, 2006, 05:41:13 PM
And we're in...
One problem, crossmember is so bashed and tweaked that I could only get 3 bolts back in.  Guess what I will be ordering this week.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#366
June 12, 2006, 10:50:22 AM
I see that the pythons were prepared for that one.


Looks good and RED!


[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

CTENG in KS

#367
June 12, 2006, 11:50:30 AM
Pythons were fine, but I hurt my back setting it on the jack.  Now I am in PAIN!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#368
June 13, 2006, 12:36:42 AM
Lower Lumbar?



I know the feelings. Ain't nothing like a strong, acute, spinal pain!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

CTENG in KS

#369
June 13, 2006, 12:08:30 PM
Yup, you got it!
I am hoping the next day or two it will ease up so I can get the rest of the bolts in the cluch housing and the starter and slave cylinder installed.  I just can't crawl under there right now.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#370
June 13, 2006, 07:21:46 PM
Well, take long soothing baths with female accompaniment...


This should remedy the problem.
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

CTENG in KS

#371
June 14, 2006, 05:25:16 PM
Well I got the IFS torsion bars in...they are smaller diameter than I expected, which I think is a good thing.  I am still working it out in my mind, but I think I have a plan.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#372
June 14, 2006, 05:27:33 PM
Does anyone know if you can remove the torsion bar from this round housing/mount it sets in, or do I have to cut it off?
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#373
June 14, 2006, 05:29:06 PM
Last torsion bar pic...Im putting them on here so I can see em while I think at work.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#374
June 14, 2006, 05:31:06 PM
Now for the problems, I got one of the sides of the hawse mounted up, when my welder blew that fuse again, so I put in a new fuse and soon as I struck an arc it blew again.  I think that this might be the end, thus I am now in the market for a new welder.  snif snif..
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#375
June 14, 2006, 05:32:06 PM
Then I decided to take another picture:
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#376
June 14, 2006, 05:33:20 PM
And that picture made me so happy I decided to put the winch on the plate and take another!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#377
June 14, 2006, 08:28:55 PM
Hate to hear that about the welder.


Hopefully, it won't slow you down too much!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

CTENG in KS

#378
June 15, 2006, 07:23:44 AM
Gonna order up anew one today, just haven't decided which...
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#379
June 15, 2006, 08:11:06 AM
I made a quick decision...I ordered one of those clark 130's...next step up in bottom of the barrel welders.  Little more power, the option for a bottle, and a 2yr warrantee.  My reasoning: I still don't want to spend a bunch on a 110 welder, welding depot had them on special, between the two welders I still haven't spent as much as a Hobart 125.  I will of course give a nice review of the welder including comparisons with the HF model when I get it.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#380
June 15, 2006, 12:31:45 PM
Cool, cool. Hope the new zapper works for you!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

CTENG in KS

#381
June 16, 2006, 06:21:18 PM
Well, with the welder down and my back sore, I needed a new project to get started on...so I figured, what the hell, I 've been wanting to try this out for a while.  You all know what used to be here:  Sorry Marlin Superfans...
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#382
June 16, 2006, 06:22:59 PM
AH! The blasphemy!


I understand though. What are you going to do with the V838 Monocerotis on your hood?
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

DTB

#383
June 16, 2006, 06:23:14 PM
what r u painting now?  :headscratch: 
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

CTENG in KS

#384
June 16, 2006, 06:24:57 PM
What!!??  What are you doing painting your truck with a foam brush???  Ahh, all in due time.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

6.72:1

#385
June 16, 2006, 06:28:14 PM
That was quick!


He surprised us Dirttoyboy.

It was attack by Blitzkrieg.

He used a ploy to get our attention, then FLANK ATTACK!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

FATTshack

#386
June 16, 2006, 08:38:31 PM
AHHHHHHHHH, everytime you paint a car with a foam brush, a painter loses his wings!

NO AJ NOOOOOOOOOOO

DTB

#387
June 16, 2006, 09:02:53 PM
have u tried sponge painting? i heard that's the hottest new thing  :psss:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

CTENG in KS

#388
June 16, 2006, 09:44:22 PM
Figures as soon as I put paint on that hood you would hop on here Scotty...don't worry, I am not done yet.  This is an experiment that can always be covered later.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#389
June 16, 2006, 09:46:38 PM
I wish it actually looked as smooth as it does in that picture...amazing what an overwhelming amount of flash will do for a crappy paint job!
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0
Print
Go Up Pages 1 ... 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 ... 56
User actions