Author Topic: Official MCR6 Thread -- Sept 14 - 16, 2007 (Read 129396 times)

JZ · « **Reply #240 on:** Jun 08, 2007, 07:32:26 PM »

where is the round up at, how many rigs allowed? so are all the rigs going so far full bodied rigs? the computer at work won't allow me to DL the registration

Rockcrawlintoy · « **Reply #241 on:** Jun 08, 2007, 08:46:07 PM »

its out at the Rubicon. its pretty much more the marrier. oh yeah it will be mostly full bodied rigs

DRew

BLACKDOG · « **Reply #242 on:** Jun 08, 2007, 08:48:43 PM »

Quote from: JZmudbogger on Jun 08, 2007, 07:32:26 PM

where is the round up at, how many rigs allowed? so are all the rigs going so far full bodied rigs? the computer at work won't allow me to DL the registration

roundup is at the Rubicon, specifically Rubicon Springs (about halfway through) Rig amount is whoever registers and pays. Most of the rigs are full bodied, but there are plenty of buggies that wind up going.

JZ · « **Reply #243 on:** Jun 08, 2007, 11:26:32 PM »

just try to see if I want to bring the truck or buggy, thanxs guys, oh yeah where is the rubicon at?

yotaboy79 · « **Reply #244 on:** Jun 08, 2007, 11:46:49 PM »

if your looking to mapquest it to get an idea of how far the drive is its not far from placerville or pollock pines california

46&2 · « **Reply #245 on:** Jun 09, 2007, 01:14:00 PM »

The entrance is in Georgetown, California. About 30 minutes from Auburn.

MiniSimp · « **Reply #246 on:** Jun 09, 2007, 10:19:40 PM »

Nice job on sending out the FOTR pamphlets guys!

Duffil · « **Reply #247 on:** Jun 10, 2007, 01:22:35 AM »

i was wondering about that...

crawlerdan · « **Reply #248 on:** Jun 10, 2007, 02:18:04 PM »

Quote from: toybuilt on Jun 03, 2007, 09:18:02 AM

Crawlerdan and myself will be there in my rig $Beer Chug\'n$ Can't wait for good times and to be away from work

yay!!!! hey big mike, you better hang with us low lifes this trip!! ive been that past 3 years and all ive got is "hey look, its dan, nice runner"

BigMike · « **Reply #249 on:** Jun 11, 2007, 02:04:30 PM »

You mean I'm supposed to hang out with the forum members?

*FFC* · « **Reply #250 on:** Jun 11, 2007, 02:49:10 PM »

Quote from: BigMike on Jun 11, 2007, 02:04:30 PM

You mean I'm supposed to hang out with the forum members?

Lady Di · « **Reply #251 on:** Jun 11, 2007, 05:12:27 PM »

No.. you're supposed to hang out with the people who traveled furthest to see you, again.

Lady Di · « **Reply #252 on:** Jun 11, 2007, 05:13:49 PM »

Maybe this year we'll actually stop at your shortbus stop this year

Wermz84 · « **Reply #253 on:** Jun 12, 2007, 09:19:54 AM »

Just got off the phone with two places about renting a trailer.

United Rentals: $65 per day 15' L x 79" W

U-haul: $50 per day he could not give me dimensions, nor did he have one i could come look at. I would have to pre reserve it.

yeah I know, I'm starting early.

crawlerdan · « **Reply #254 on:** Jun 12, 2007, 09:44:56 AM »

Quote from: BigMike on Jun 11, 2007, 02:04:30 PM

You mean I'm supposed to hang out with the forum members?

yes mike, yes you are

*FFC* · « **Reply #255 on:** Jun 12, 2007, 10:21:49 AM »

Quote from: Wermz84 on Jun 12, 2007, 09:19:54 AM

Just got off the phone with two places about renting a trailer.

United Rentals: $65 per day 15' L x 79" W

U-haul: $50 per day he could not give me dimensions, nor did he have one i could come look at. I would have to pre reserve it.

yeah I know, I'm starting early.

Yer truck ain't that big Wermy.. it'll fit on a u-haul

Wermz84 · « **Reply #256 on:** Jun 12, 2007, 10:57:48 AM »

Quote from: FordFreakChik on Jun 12, 2007, 10:21:49 AM

Yer truck ain't that big Wermy.. it'll fit on a u-haul

sweet, thanks. they had absolutly no clue.

*FFC* · « **Reply #257 on:** Jun 12, 2007, 11:28:43 AM »

Quote from: Wermz84 on Jun 12, 2007, 10:57:48 AM

sweet, thanks. they had absolutly no clue.

I'm pretty sure it will.. long's you don't go full width

Wermz84 · « **Reply #258 on:** Jun 12, 2007, 11:57:46 AM »

Quote from: FordFreakChik on Jun 12, 2007, 11:28:43 AM

I'm pretty sure it will.. long's you don't go full width

No chance of that happening any time soon.

8Snaces · « **Reply #259 on:** Jun 12, 2007, 12:59:27 PM »

R u gonna be runnin those stock size tires still or ru gonna go bigger? Im runnin 37x13x15 boggers and i put the outer edge of my tire (like outer 1 1/2") on the railing, .... just my

rockscrambler · « **Reply #260 on:** Jun 12, 2007, 06:33:18 PM »

Quote from: unclejpl4x4 on May 16, 2007, 06:38:45 AM

printed out the resistration 1 step closer
put in the vaca days off step2 closer

so are ya flying out again or driving your truck out this year?

rockscrambler · « **Reply #261 on:** Jun 12, 2007, 06:35:57 PM »

Quote from: MrsWillyMammoth on May 16, 2007, 04:50:35 PM

Wow!! what a coincidence! check this out... some guy with the same name, last initial and vehicle and in the same state as us! What are the odds

5/15/2007:
Mark L FL 1948 AMC Willys

sweeeeeet !!!!

Wermz84 · « **Reply #262 on:** Jun 13, 2007, 08:46:29 AM »

Quote from: 8Snaces on Jun 12, 2007, 12:59:27 PM

R u gonna be runnin those stock size tires still or ru gonna go bigger? Im runnin 37x13x15 boggers and i put the outer edge of my tire (like outer 1 1/2") on the railing, .... just my

Since I have a lot to do before the roundup and little

I'll probably end up putting the 31's on from my Runner.

*FFC* · « **Reply #263 on:** Jun 13, 2007, 09:29:06 AM »

Quote from: Wermz84 on Jun 13, 2007, 08:46:29 AM

Since I have a lot to do before the roundup and little I'll probably end up putting the 31's on from my Runner.

Yoooooo cannn doooitttttt!!!!

8Snaces · « **Reply #264 on:** Jun 14, 2007, 07:01:52 AM »

10-4! That worx. I hear ya on the $$. Im workin my arse off to make as much moola as i can while there still offering OT and DBL OT. Im hoping to get a house this summer.

MiniSimp · « **Reply #265 on:** Jun 19, 2007, 10:51:01 AM »

Marlin Crew, I haven't clearaed this with you guys yet, so I hope it is ok. If not, let me know. I figure free stuff is always good!

Re: the Raffle

Rod Gowett at Bay Tool & Supply in Milpitas, CA has donated a Makita 18V LXT Lithium-Ion Cordless Cut-Off/Angle Grinder Kit to give-a-way at the Springs!!!!!!!!
I'll be bringing it up with me.

LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles
Makita built produces 50% faster grinding with an impressive 10,000 RPM
More compact design at only 12-1/2" long and weighs only 5.6 lbs. for less operator fatigue
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses "Active 3 Control" for current control, thermal control & voltage control
45-minute Optimum Charger has a built-in fan to cool the battery to produce more lifetime work
Built-in electronic control circuit with L.E.D. warning lights for overload protection
Slide switch with lock-on
3-year warranty on tool and 1-year warranty on battery

INCLUDES:
2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute optimum charger (DC18SC)
Cut-Off wheel guard (135103-2)
Grinding wheel guard (125267-0)
Grinding Wheel (7414248-1)
Cut-Off Wheel (724112-A-25)
Tool case (824767-4)

Specifications:
Grinding Wheel 4-1/2"
Cut-Off Wheel 4-1/2"
Wire Cup Brush 3-1/2"
Sanding Disc 4-1/2"
No Load RPM 10,000
Watt Hours 54.0
Battery 18VDC (3.0Ah)
Spindle Thread 5/8" - 11 UNC
Overall Length 12-1/2"
Net Weight 5.6 Lbs.
Shipping Weight (lbs.) 17.60

rockscrambler · « **Reply #266 on:** Jun 19, 2007, 03:50:33 PM »

Quote from: Wermz84 on Jun 13, 2007, 08:46:29 AM

Since I have a lot to do before the roundup and little I'll probably end up putting the 31's on from my Runner.

hey wermz what size tire do you have clerance for? I have spare sets of 35's and 33's oh wait Where are you again? OR or WA right?

yotaboy79 · « **Reply #267 on:** Jun 19, 2007, 06:34:47 PM »

if this years round up is any thing like last years you might want to charge up the battery befor you leave incase some one needs to borrow it lol
hopfully this year isnt as problematic as last year lol

MiniSimp · « **Reply #268 on:** Jun 19, 2007, 07:49:38 PM »

Quote from: yotaboy79 on Jun 19, 2007, 06:34:47 PM

if this years round up is any thing like last years you might want to charge up the battery befor you leave incase some one needs to borrow it lol
hopfully this year isnt as problematic as last year lol

I already have my own in the tool box, just in case

Duffil · « **Reply #269 on:** Jun 19, 2007, 08:10:20 PM »

Quote from: MiniSimp on Jun 19, 2007, 07:49:38 PM

I already have my own in the tool box, just in case

Isn't that Dave's?

BigMike [OP]

Related Topics