$300

Started by WHITE_TRASH, December 29, 2003, 06:41:05 PM

0 Members and 1 Guest are viewing this topic.

84runner

Quote from: WHITE_TRASH on June 21, 2004, 02:56:17 PM
Yup if you hadent guessed yet I didnt get my cage installed so I just gave up on competing, come to find out not only did I NOT need a cage but I also did NOT need to finish my winchplate!  So I could mount the winch on it.  Needless to say I was not the happiest guy at the event when I found out the news that after working my A$$ off for 3 month I got shot down because of the rules page never being updated!  Hell ShawnB was a course judge and he was given a even older set of rules than what is posted on the Calcrocs website!  But it was a fun time for all and I got to meet a lot of people from this board and others, thanx for the good time!

Ive got another 12 months before Goldendale rolls around again so just imagine what Ill get done before then!


:headshake:    :bull crap:
RUBICON TESTED BIG BALLS APPROVED

Jared

wt, is that thing locked??? what do you have in the axles??
ah the beauty of a cuttin torch

redroller

WT,83 yota told me to read your forum. he said it was long but worth it. nice build ups. whats next. heres some points for your efforts. :_order: :flamer: :driving: :thumbs:

WHITE_TRASH

Why thank you for the comment redroller.  Jared the rear is welded as of now with *gulp* 3.90's!  But its kinda weird, it does really well on the highway, granted 5th is there just for looks but it hauls some serious butt with 35's!  Ill be pulling the whole front axle out and trading it for the one in my 84 beings it has longs and the cruiser brakes along with 4.10's, Ill also put 4.10's back in the rear too of course.
Full hydro, 186:1 with an auto and 44's what could go wrong??

KYOTA

Did you have your "chat" with big rich?

WHITE_TRASH

I threw my pregnant dog up on the official website.  I had time to cool down since this weekend so I didnt go for the throat but I made myself clear enough.  I havent actually looked for a response yet though.






Holy crap i need a hobby!  This is my 1700th post!
Full hydro, 186:1 with an auto and 44's what could go wrong??

WHITE_TRASH

Nope no responce yet.
Full hydro, 186:1 with an auto and 44's what could go wrong??

Skinny_Pedal

just curious whose big rich
Im an OG

WHITE_TRASH

Big rich runs Calrocs and lil rich sets the courses and basically does all the leg work for the orgonization.
Full hydro, 186:1 with an auto and 44's what could go wrong??

redroller

wt do you think it is worth it to find and put on a full disk brake conversion?

83yota

WT i see you and redroller are friends now? tahts cool. your thread keeps getting longer and longer :yupyup:
85 toyta 4runner Soon to be full widths... i hope http://board.marlincrawler.com/index.php?topic=62935.0

90 toyota runner Very sadly gone
http://board.marlincrawler.com/index.php?topic=75563.60

WHITE_TRASH

Quote from: redroller on June 23, 2004, 07:48:56 AM
wt do you think it is worth it to find and put on a full disk brake conversion?

If I had the ambition I would do it myself.  I have the parts just sitting here collecting dust.  I just dont think that I need it really, my brakes work awesome as is.
Full hydro, 186:1 with an auto and 44's what could go wrong??

84runner

Quote from: WHITE_TRASH on June 23, 2004, 11:21:33 AM
Quote from: redroller on June 23, 2004, 07:48:56 AM
wt do you think it is worth it to find and put on a full disk brake conversion?

If I had the ambition I would do it myself.  I have the parts just sitting here collecting dust.  I just dont think that I need it really, my brakes work awesome as is.

From what I have seen here WT you not lacking the ambitoin  :headshake:  So where in the next closest CalRocs event to you ? any chance of you makeing that one, or was your truck that far out of regulation ?
RUBICON TESTED BIG BALLS APPROVED

WHITE_TRASH

All that my truck would have needed was a e-brake, a master kill switch for the electrical and a locker up front and its legal.  But according to the rules I needed a cage, winch, 4 point harness, dual extinguishers etc.  The rules are what killed the whole thing they havent been updated and they included stuff that has never been required in the mod stock class, ever.
Full hydro, 186:1 with an auto and 44's what could go wrong??

83yota

do you know where i can get the kit or the easiest way to pick up all the parts i need? also do you know where i can get some low gears that i can still drive on the road on a military budget?
85 toyta 4runner Soon to be full widths... i hope http://board.marlincrawler.com/index.php?topic=62935.0

90 toyota runner Very sadly gone
http://board.marlincrawler.com/index.php?topic=75563.60

WHITE_TRASH

You can buy the caliper brackets from sky.  The rotors and calipers Id just get from a local parts house.  Youll need the calipers from either a 78+ caddy (rwd) or a monte carloe of the same vintage if you dont want a e-brake.  The rotors are from a 88+ chevy 4x with the light duyt rotors.  They made a heay duty rotor but it is too thick for the caliper.  For gears Id just leave whatever you have, Ive got 3.90's in my truck now and it really doesnt do too bad at all.
Full hydro, 186:1 with an auto and 44's what could go wrong??

brainlessfool

Quote from: WHITE_TRASH on June 22, 2004, 08:18:39 PM
Holy crap i need a hobby!  This is my 1700th post!



heck, you need a GF.  that will burn up your time!
A good day working, that's just sick :reg:

WHITE_TRASH

Womens is the debil!!  I like the fact that if my current girly ticks me off I can just beat the crap out of her and noone will call the cops!  If she gets out of line I just kick her in the ribs to get her back inline.  But what can I say the yota isnt much fun in the sack. :headshake:
Full hydro, 186:1 with an auto and 44's what could go wrong??

brainlessfool

 :shake_head: hummmmm, you realy are a sick and twisted man. geass thats whay we get along on here  :biggthumpup:
A good day working, that's just sick :reg:

WHITE_TRASH

What you thought this truck was done??  HELL NO!! 
Full hydro, 186:1 with an auto and 44's what could go wrong??

brainlessfool

Well I for one, and the viking cat overlords too know better than that!   :thumbs:


keep it coming  :clap2:
A good day working, that's just sick :reg:

mudguts

The MadMax bumper is tough looking :angry:
:nerv:                                                                                               :turtle: I love T.I.T.S. :turtle:

Brian83

I think your front axle looks kinda bent??   :o   Oh wait nevermind thats just the frame.  :smack:


Common sense just isn't that common anymore

WHITE_TRASH

Damnit!  You guys suck!  I dont wanna hear anymore about that damned frame ok??!!




































lol betcha though I was mad huh?  lol
Full hydro, 186:1 with an auto and 44's what could go wrong??

lowgeared

Looking good...except the windshield has too much glass in it!!  :)
Friends help you move.  Real friends help you move bodies.

shawnb

Looks good WT. What are you going to do to the rest of it. P.S. jeff just saw the nefs and wanted to know if I had any medal left. :psss:

WHITE_TRASH

Tell 'el jefe that he can go buy some!
Full hydro, 186:1 with an auto and 44's what could go wrong??

shawnb

he he
He was disapointed that I'm doing the family thing this weekend and not going up Little Nache's. He'll have to wait to get smoked again.I can't wait untill we get some snow. You'll be amazed at how well you gumbo's do in the snow.

WHITE_TRASH

I still might be going up there this weekend, I guess he'll get really pissed when my junk kicks the crap out of his 40k pile of visa reciepts!
Full hydro, 186:1 with an auto and 44's what could go wrong??