DTB's ANGRY TREE HUGGER (Now pulling an angry pop up camper)

Started by DTB, January 22, 2006, 10:48:06 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ... 52
User actions

Rocksurfer

#660
September 09, 2007, 10:27:42 AM
Ohhhhhh, man a Toyota 4x4, lots of rocks, a cabin and your woman....... all the finer things in life. :thumbs:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

sinbob

#661
September 10, 2007, 03:07:04 PM
sweet :thumbs:  wish mine was an extended cab :rivers: I did the same thing to my floorboards that :pokinit: is really stikey

Yeah I know about the list thing.  Every time i get it to wher I think I am almost done i read someone elses build and want to change things.  wish now I had a 4.70 dual instead of the 2.28 and then ther d well u know what I mean it jus goes on and on and on  :beerchug:
85 flatbed, 22RE,Downey air, redtop, dual 2.28 crawler, high steer, Marlin clutch, 5.29's, ARB rear, lockright front, Warn hubs, wrangler 4" front-skyjacker 4" r-springs w/6" shackels, flip kit, 35x12.5x15 MTR's, sliders, belly, exocage.
:support our troops :usa:
They told me I had to grow old, but they never told me I had to grow up. :cheer:
"life is not measured by the number of breaths we take, but by the moments that take our breath away" :bananasplit:
Life is not about waiting for the storm to pass, but learning to dance in the rain :dancing:

PA_taco_13

#662
September 10, 2007, 03:16:37 PM
holy flying flat bed bat man !! looking very good dude :thumbs:
learn the hard way 

"my dixie wrecked"
    
east coast crawler

unclejpl4x4

#663
September 16, 2007, 04:28:15 PM
like this
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

DTB

#664
September 27, 2007, 05:33:19 AM
Just a quick update....got the downey header, flowmaster and shocks/hoops dun up....and a couple pics from arkanslaw, hot springs last weekend...the truck works 10 times better than I expected!  :o







RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Wermz84

#665
September 27, 2007, 07:44:04 AM
Very cool!   
I like to Drive!

Rocksurfer

#666
September 27, 2007, 08:09:36 AM
Get off the ramp and show us some real wheeling!!

















Got some nice flex there DTB.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Jud

#667
September 27, 2007, 10:25:21 AM
That shock hoop looks cool!
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

DTB

#668
September 27, 2007, 10:39:20 AM
Quote from: Jud on September 27, 2007, 10:25:21 AM
That shock hoop looks cool!
its a sky man hoop with marlin gussets..thanks

RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Jud

#669
September 27, 2007, 10:42:56 AM
Quote from: DirToyBoy on September 27, 2007, 10:39:20 AM
its a sky man hoop with marlin gussets..thanks

Oh whoops I meant the rear one! lol
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

DTB

#670
September 27, 2007, 10:44:24 AM
Quote from: Jud on September 27, 2007, 10:42:56 AM
Oh whoops I meant the rear one! lol
ohhhh that one..yea it was really easy to make..thanks for the compliments  :biggthumpup:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Jud

#671
September 27, 2007, 10:45:40 AM
Ya it looks really simple and strong!  :biggthumpup:
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

yotadork83

#672
September 27, 2007, 01:05:28 PM
what series flowmaster is that? looks like a hushpower to me.
83 toyota shortbed, 90 rear axle, 5.29's f/r, spools f/r, 22/20 hybrid w/propane, 37 mtrs. dual transfer cases. http://board.marlincrawler.com/index.php?topic=22712.0
yotas 4 life homie!

bigarms23

#673
September 27, 2007, 03:47:05 PM
looks like it performs well
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

79coyotefrg

#674
September 27, 2007, 04:28:48 PM
hey  he ran  some of the 4's  and  a couple of 5's  Gittinit said he did GREAT
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

6.72:1

#675
October 09, 2007, 04:19:16 PM
Hey DTB,

I'm back. Congrats on the build...oh, there is a piece of junk truck over in 'Bamer that needs some finishing....

I need some more speed, but I'm afraid the Tonker build will be delayed for a little over a year....

Looks great buddy! Keep it up!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

Duffil

#676
October 10, 2007, 08:28:05 PM
Quote from: 6.72:1 on October 09, 2007, 04:19:16 PM
Hey DTB,
I need some more speed

you shouldn't post that here. :nonono:

:rofl2:

Wermz84

#677
October 11, 2007, 12:05:49 PM
Quote from: 6.72:1 on October 09, 2007, 04:19:16 PM
Hey DTB,

I'm back. Congrats on the build...oh, there is a piece of junk truck over in 'Bamer that needs some finishing....

I need some more speed, but I'm afraid the Tonker build will be delayed for a little over a year....

Looks great buddy! Keep it up!

Holy Crap!  your alive!    :yupyup:


Quote from: Duffil on October 10, 2007, 08:28:05 PM
you shouldn't post that here. :nonono:

:rofl2:

:funny:
I like to Drive!

6.72:1

#678
October 22, 2007, 08:32:17 AM
Quote from: Wermz84 on October 11, 2007, 12:05:49 PM
Holy Crap!  your alive!    :yupyup:


:funny:

Heehee, you Californers....
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

DTB

#679
October 27, 2007, 01:47:12 PM
Ok, so I bought it and hooked it up today...pretty impressed so far...image and wireless signal seem good. There are adjustments for brightness and contrast. It is suprisingly bright for being underneath the truck.








I ran a bead of silicone around the camera and rock lights (which I got from SuperBrightLEDs.com) after reading about some potential moisture problems someone had.




I really, really hate wiring....i dont know why..it's really easy...just hate it...



These long pliers made it easy to fish wires through the firewall..



testing...testing...my most angriest face possible



Mounted it here for now...




RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

DTB

#680
October 27, 2007, 03:01:12 PM
I also got a Smittybilt xcr8 for 284 shipped from winchdepot.com......couldnt pass up such a deal. If I like the winch I will probably integrate one into my rear tube bed with axle suck down feature :woohoo:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

unclejpl4x4

#681
October 27, 2007, 03:10:23 PM
:rofl:  thats angry
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Yota4life

#682
October 27, 2007, 05:47:42 PM
Thats pretty nice to have eyes back there. How much for the camera kit?
88 Toyota Pickup with some stuff...
Build up: http://board.marlincrawler.com/index.php?topic=11133.160

DTB

#683
October 27, 2007, 05:52:02 PM
Quote from: Yota4life on October 27, 2007, 05:47:42 PM
Thats pretty nice to have eyes back there. How much for the camera kit?
100 bucks shipped from wally....im pretty impressed so far... yes it is nice to have eyes there...also nice to be able to look out the FRONT windshield and see whats BELOW you at the same time..kind of like a heads up display of underneath ur rig  :biggthumpup: you can see in that last pic that even from the drivers seat the image is bright, clear and big enough to see
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Yota4life

#684
October 27, 2007, 09:22:49 PM
ya i have seen those at wally mart before, good looking screen. You problem wont get hung up in the rear to often now :)
88 Toyota Pickup with some stuff...
Build up: http://board.marlincrawler.com/index.php?topic=11133.160

Doof

#685
October 27, 2007, 09:33:08 PM
are those leds the ALM-x6?

DTB

#686
October 28, 2007, 04:31:42 PM
Quote from: silly58willy on October 27, 2007, 09:33:08 PM
are those leds the ALM-x6?
:biggthumpup: yup!  I like them so far...and for 9 bucks a light, i will be adding a few more
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Doof

#687
October 28, 2007, 04:35:22 PM
do you have any night pics with these bad boys mounted?

DTB

#688
October 28, 2007, 04:44:40 PM
Quote from: silly58willy on October 28, 2007, 04:35:22 PM
do you have any night pics with these bad boys mounted?
Im working on that
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

skipnrocks

#689
October 28, 2007, 05:19:15 PM
What kind of connection is used on the camera system, is it common that you could get a switcher box and run multiples cameras , I would like to run four cameras on my rig...  I suppose with it being wireless and all  you would probably have to run switches to turn the cameras on and off rather than tapping into the lighting system...
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new
Print
Go Up Pages 1 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ... 52
User actions