Author Topic: Kiyul4130s rig (Read 502060 times)

91 ex-cab · « **Reply #2040 on:** Jan 14, 2011, 09:27:53 PM »

I wanted the 40" mtr's but the price is not right on a brand new set of them. I've never run bigger than a 35 so I figured i'd try the 39.5's for now.

pumkin toy · « **Reply #2041 on:** Jan 15, 2011, 11:23:32 AM »

mtr's are way overpriced now. i would go with the iroks, best buy for the money it seems like

kiyul4130 · « **Reply #2042 on:** Jan 18, 2011, 06:59:56 PM »

it all depends on what your looking to do with your rig. if its on the road id get a new MTR.

kiyul4130 · « **Reply #2043 on:** Jan 18, 2011, 07:04:42 PM »

the drag link is almost in. thanks for the heim booger. i turned down the tube insert at work to fit inside my old tubing.
i still need some god damn 3/4 (for 3/4" bolt) HIGH MISS ALIGNMENT SPACERS for a 7/8 heim!! i tried ruff stuff 4 days in a row last week and they kept telling me the M/S "will be ready tomorrow". so im still in the same boat with a 90% drag link. i got my intake all in with a new hoop i had to cut out cause i didnt tack it in.

someone wire my battery and throw in my 5.38s so i can get it the hell out of there!!!!!

P-DiseToy24 · « **Reply #2044 on:** Jan 21, 2011, 11:35:21 AM »

Looks killer man for sure gunna have to check it at KOH.

kiyul4130 · « **Reply #2045 on:** Jan 22, 2011, 01:05:21 AM »

hood an fenders are on. i got the front 5.38s in just about. gunna finish those up an get the rears in tomorow hopefully.

monday is ordering up some front shafts............

91 ex-cab · « **Reply #2046 on:** Jan 22, 2011, 11:04:46 AM »

Quote from: kiyul4130 on Jan 22, 2011, 01:05:21 AM

hood an fenders are on. i got the front 5.38s in just about. gunna finish those up an get the rears in tomorow hopefully.

monday is ordering up some front shafts............

Are you going with a set of rcv's?

P-DiseToy24 · « **Reply #2047 on:** Jan 23, 2011, 10:25:18 AM »

Better be there the only way to go!!

91 ex-cab · « **Reply #2048 on:** Jan 23, 2011, 06:33:09 PM »

Superiors and ctms are pretty

aswell.

kiyul4130 · « **Reply #2049 on:** Jan 24, 2011, 08:13:13 PM »

Quote from: 91 ex-cab on Jan 22, 2011, 11:04:46 AM

Are you going with a set of rcv's?

if a few things work out, yes.

kiyul4130 · « **Reply #2050 on:** Jan 25, 2011, 08:29:08 PM »

i forgot to post these.

the drag link is almost in. i turned down the tube insert at work to fit inside my old tubing.
i still need some damn 3/4 HIGH MISS ALIGNMENT SPACERS for a 7/8 heim!! i tried ruff stuff 4 days in a row last week and they kept telling me the M/S "will be ready tomorrow". so im still in the same boat with a 90% drag link. i got my intake all in with a new hoop i had to cut out cause i didnt tack it in.

someone wire my battery and throw in my so i can get it the hell out of there!!!!!

kiyul4130 · « **Reply #2051 on:** Jan 25, 2011, 08:30:45 PM »

got my 5.38s in both the diffs.

kiyul4130 · « **Reply #2052 on:** Jan 25, 2011, 08:32:06 PM »

made a diff cover tonight. im welding it at work tomorrow and counter sinking it too.

P-DiseToy24 · « **Reply #2053 on:** Jan 25, 2011, 08:42:00 PM »

oooooooo OOO

perfect gaps. Makes me want to go weld. sooo bad!!!
Lookin titties...

kiyul4130 · « **Reply #2054 on:** Jan 25, 2011, 08:43:31 PM »

there are 2 minor bigger ones. ill weld the inside first so its easier to fill it from the outside. i dont want to warp this thing either.

P-DiseToy24 · « **Reply #2055 on:** Jan 25, 2011, 08:50:15 PM »

throw a thinner piece on the inside covering the gap and just burn it in from the outside.... im thinkin to passes might warp it unless you do it real slow

kiyul4130 · « **Reply #2056 on:** Jan 25, 2011, 08:53:57 PM »

no need to put anything in there. one quick on all around on the inside and a nice one on the outside and it will be good. i made my front cover as well.

-Matt- · « **Reply #2057 on:** Jan 25, 2011, 08:56:21 PM »

You'll prob warp it no matter what you do. Id bolt it up and weld as much as you can while its on

Slolyfe · « **Reply #2058 on:** Jan 25, 2011, 10:07:33 PM »

Kickin ass and taking names. Strong work dude.

Peterbuilt84 · « **Reply #2059 on:** Jan 25, 2011, 10:19:55 PM »

Fab work looks super clean on the whole link setup. Looks like you took your time and researched and planned everything out pretty well, good job!

Can't wait to see this thing in action

kiyul4130 · « **Reply #2060 on:** Jan 30, 2011, 10:59:31 AM »

my trucks so close. i need a new damn battery cause my optima is smoked. its basically wired and everything is back together. i need to fill it with fluids. i dont think its making it to KOH though. i dont have a tow down there.

pumkin toy · « **Reply #2061 on:** Jan 30, 2011, 04:33:54 PM »

Dude! you gotta get it to KOH! that was your whole goal for getting it back together asap

kiyul4130 · « **Reply #2062 on:** Jan 30, 2011, 10:29:33 PM »

i dont have a tow. if im high ill drive it there.

kiyul4130 · « **Reply #2063 on:** Jan 30, 2011, 10:51:34 PM »

well this is as finished looking as it gets as of tonight.

check lists left:
1. new optima battery. mines fucked.
2. get front brake lines in.
3. charge bumps/shocks.
4. paint it.

kiyul4130 · « **Reply #2064 on:** Jan 30, 2011, 10:54:12 PM »

if i smoke the right crack im driving it to KOH. yes scum bags........... with the 42s.

these are as about as finished of pics as you get.

86bobbedtoy · « **Reply #2065 on:** Jan 31, 2011, 10:29:57 AM »

whats wrong with that,
mob it

Montana300 · « **Reply #2066 on:** Jan 31, 2011, 11:49:27 AM »

That 3 link is looking great keep us posted.

SloCrawler · « **Reply #2067 on:** Jan 31, 2011, 01:15:41 PM »

TacoRunner · « **Reply #2068 on:** Jan 31, 2011, 01:24:32 PM »

I noticed you have a good pinion angle going on, what's your caster at right now?

TacoRunner · « **Reply #2069 on:** Jan 31, 2011, 01:25:33 PM »

Also, what do you have for a ride height measurement?

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]