the parts suck or the vendor sucks?
The vendor is fine, it's just that the diff covers and all of the parts he sells are flame cut so the holes for the cover bolts were 3/8 on the outside edge but 11/32 inside edge so I have to use a die grinder to open them up. Also a couple of the holes were off by about 1/8" so they had to be egged out too. The kit cover is a bunch of pieces you have to put together with no instructions. Which I guess isn't that big of a deal but it is just a hassle, like the front cover has a hole in it for a fill plug. You can either tap it to 1/2" pipe and use the stock fill plug or weld a bunk into it which is nice I 'spose but unless you have that stuff on hand you're screwed.