Author Topic: Making Of The Willy Mammoth (Read 790762 times)

Lady Di · « **Reply #2220 on:** May 24, 2007, 03:56:53 PM »

I just looked, it is KM but it's like 200~something KM so the 123K is what the mileage is. But that's still nothing for a diesel.

79coyotefrg · « **Reply #2221 on:** May 24, 2007, 04:00:18 PM »

they pull them at 1/4 life expectancy i think so it should be good for 400,000plus

Fongs · « **Reply #2222 on:** May 24, 2007, 04:15:20 PM »

Quote from: 79coyotefrg on May 24, 2007, 04:00:18 PM

they pull them at 1/4 life expectancy i think so it should be good for 400,000plus

jepp.....thats right

time for bed now...
@Mrs Willi

say hello to mark from us in germany....we look to find pices $Beer Chug\'n$

Lady Di · « **Reply #2223 on:** May 24, 2007, 04:15:46 PM »

Mark said they pull them from Japan at a certain point when the feel they can't reach their EPA, and that's when people like this guy in GA gets them.
Cool for us!

Lady Di · « **Reply #2224 on:** May 24, 2007, 04:16:09 PM »

Quote from: Fongs on May 24, 2007, 04:15:20 PM

jepp.....thats right

Dang!!

Lady Di · « **Reply #2225 on:** May 24, 2007, 04:16:59 PM »

I love all the input from everybody but I have to say having the input of Fongs, Zappel and Bazzi is so cool.
What a small world the board makes. $Beer Chug\'n$

Fongs · « **Reply #2226 on:** May 24, 2007, 04:29:53 PM »

ToyotaOffroadWorld...its a small World.... $Beer Chug\'n$

good night....
we also happy here to se Mark with the 1KZT engine..inside $Beer Chug\'n$

79coyotefrg · « **Reply #2227 on:** May 24, 2007, 04:50:59 PM »

are we on page 67 yet

Lady Di · « **Reply #2228 on:** May 24, 2007, 05:05:46 PM »

Maybe one more post!

79coyotefrg · « **Reply #2229 on:** May 24, 2007, 05:16:08 PM »

79coyotefrg · « **Reply #2230 on:** May 24, 2007, 05:24:19 PM »

page 67 is born

unclejpl4x4 · « **Reply #2231 on:** May 24, 2007, 05:33:49 PM »

Lady Di · « **Reply #2232 on:** May 24, 2007, 05:45:32 PM »

Gittinit · « **Reply #2233 on:** May 24, 2007, 05:49:08 PM »

is there a build thread here somewhere?

DTB · « **Reply #2234 on:** May 24, 2007, 05:52:23 PM »

Quote from: Gittinit on May 24, 2007, 05:49:08 PM

is there a build thread here somewhere?

BLACKDOG · « **Reply #2235 on:** May 30, 2007, 05:36:38 PM »

The pictures look like the flywheel and such could come off a 3.0 (gas) might be worth checking out. I'm going through my books to see if I can find the part #s for the 3.0 stuff right now

Lady Di · « **Reply #2236 on:** May 30, 2007, 05:39:07 PM »

Quote from: unclejpl4x4 on May 30, 2007, 05:34:32 PM

are thos ford part # ( some one had 2 ask)

and someone had to

you

79coyotefrg · « **Reply #2237 on:** May 30, 2007, 05:53:19 PM »

Jason, Fongs said the flywheel and something else was very close to the 3.0

it might work with some "markification"

Willy Mammoth · « **Reply #2238 on:** May 30, 2007, 05:58:31 PM »

That would be cool if some of this stuff could be crossed to part we can get here. All of this will be mega bling if it has to come from over seas.

79coyotefrg · « **Reply #2239 on:** May 30, 2007, 06:04:45 PM »

it would make sense to me that they used the same bellhousing for different stuff
1KZ over seas and in the 3vz over here

what about the 3.4 v6 5vz ??

Willy Mammoth · « **Reply #2240 on:** May 30, 2007, 06:09:16 PM »

I can get by with just a flywheel for now and a used G54 bell housing. I am going to have to make anothe bell housing so I can keep the G54 for now.

BLACKDOG · « **Reply #2241 on:** May 30, 2007, 06:14:41 PM »

Mark, check into the 3.0(gas) flywheel being the same. I've got a flywheel on one of my engines, I can have mikerob run out and measure the diameter, and count the teeth. I knwo the 3vze(gas) has the same 8 bolts to mount it, and from the diagram, and the picture, it sure looks the same, so that seems like the best bet to me.

Sorry, I can't find any of my books that have my parts lists in them

although I did find this link that may be helpful (it contains a download for the toyota database of part #s supposedly, I don't have time to unzip it, and burn it to CD right now) the link is the Toyota EPC#1, EPC#2, and EPC FAQ near the bottom of the page.

http://www.yankeetoys.org/docs.htm

And here is the site it was linked from

http://home.att.net/~benmlee/OEMPartsSource/OEMPartsSource.htm

79coyotefrg · « **Reply #2242 on:** May 30, 2007, 06:17:54 PM »

BREAK OUT THE BBQ GRILL

everybody send your scrap alum to MrWilly

Lady Di · « **Reply #2243 on:** May 30, 2007, 06:26:16 PM »

there is markification in our future

79coyotefrg · « **Reply #2244 on:** May 30, 2007, 06:38:07 PM »

Quote from: MrsWillyMammoth on May 30, 2007, 06:26:16 PM

there is markification in our future

BRING ON THE FIRE

Bazzi · « **Reply #2245 on:** May 31, 2007, 03:08:05 AM »

I checked these parts with the Toyota dealer here, couble of weaks back. I have the part numbers in the truck. But we are talking about some serius bling bling..... the fly wheel and cluthc housing was around 100.000 kr. = 1500 $ I think. I can probably get that for half price in a junk yard. but I thought you ditn´t want that price range......

But I would check the v6 3.0 trans and engine. I know they work together with the diesel bellhousing so I would check that. and then modify that with the g54.......

Willy Mammoth · « **Reply #2246 on:** May 31, 2007, 04:31:57 AM »

Bazzi,

I was told that list was easily $2200.00 plus shipping. So there is some room to work here.

Can you find the flywheel with mounting bolts? I can go from there. (no dual mass, must be one piece)

Thanks

Bazzi · « **Reply #2247 on:** May 31, 2007, 05:58:29 AM »

ok I´ll look into that no probl. I hopefully will have some more info tonight.

BLACKDOG · « **Reply #2248 on:** Jun 01, 2007, 12:46:39 AM »

Hey Bazzi, see if you can get some specs (dimensions, teeth, mounting holes?

)on that flywheel, and I'll compare it with the 3.0(gas) I've probably even got a flywheel you can have Mark, if it'll work

79coyotefrg · « **Reply #2249 on:** Jun 01, 2007, 07:51:59 AM »

Quote from: BLACKDOG on Jun 01, 2007, 12:46:39 AM

Hey Bazzi, see if you can get some specs (dimensions, teeth, mounting holes? )on that flywheel, and I'll compare it with the 3.0(gas) I've probably even got a flywheel you can have Mark, if it'll work

can you get a pic of your flywheel Jason and post some dimensions

part #

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Related Topics