ATTENTION ALL NEWBIES READ THIS FIRST

[wayneraintree]

Newbie Jeff here... thanks for the years Marlin! Glad to read all the goodness here and find parts/rigs : )

I have a history with Toyota 4x4's... and I love it!

[JRsyota]

hey everyone, i'm new on the site. i just got an '89 yota truck and its up in sac at my uncles shop. i'm gonna paint it, lift it a bit more, put seats, a roll cage, and new tires, maybe fix up the engine a little. i also like to ride dirtbikes, i ride a honda CRF150, stiff suspension and i'm only 5feet tall! ha, so maybe my bike is a little too tall, but who cares! i also like to wakeboard and race sailboats in SC.

[THK Matt]

Welcome to the board =]

[JRsyota]

thank you ThatIDAHOKid

[95jeepyj]

OK Im new.....I have a 95 yj...and im lookin for someother jeepers out there....

[46&2]

  guys!

[DTB]

Welcome to all the newbies young and old.........

[mrjoe]

Hey guys my name is Joe. Im in northern California. All I have is a 87 Jeep XJ, stock lol.

[unclejpl4x4]

Hey guys my name is Joe. Im in northern California. All I have is a 87 Jeep XJ, stock lol.

good so your ready to build a toy 

[DTPROFAB]

this helped out alot

[sillyface]

Thanks for the info 

[46&2]

 

[baddog]

I'm new too.

[THK Matt]

Welcome Guys.

[1980 swap Under Construction]

hey marlins  im new

[Wermz84]

Welcome aboard.

[HxCmudBogger]

joe dirt, "im new, i don't know what to do"

new to site but addicted already

thanks
-dave

[BustBig]

hey im new with this i have a bobbed 86 standard cab w 6 in lift  33 in boggers and 11 in bob job alot more on its way starting with stinger sliders and new axle up front  i look forward to meeting new people and showing my truck off all here from gaston OR about an hour from Browns Camp

[Booger041]

Just came aboard.  My ride, 04 Runner SST ReadyLift 3 front 2 rear 285/70/17

[potter85]

video is pretty smart. once this is full it will be a database of toyota POWWWWEEEERRRRRRRR aghhh haaaaaa...haaa

[Border Jumper]

I'm a total noob but I pick up my 84 extracab June 13, it will be nice not to have to barrow my wifes tj to go wheelin with my bros!

[86rustbucket]

.

[wake2wake623]

Hey there I just wanted to introduce myself. I am a college student just gettin by. I dont have a rig yet but, I am excited to get started on one. I guess my interest in one stems for going offroading in a 884runner that was SAS and dual cased. I was amazed at what they could do. My first time out in the rig was the last. We flipped it 5 times on the highway coming home out in the desert. We were very lucky, people were ejected when the shell broke off, ect. We all suffered relatively minor injures(broken arms, ribs, ect.) So now its one of those, get back up and get back offroad in a crawler type things.

Right now I am torn between building a 3rd gen pickup and a 2nd gen runner. I have been lurking for a little while and know basically what I want to do. Being in college it is going to be slow going. I want to stick IFS for a while and wheel the piss out of it while I gather money and parts. Then do an SAS and duals plus armor, and add from there. Lookin to run 35's cause it is going to be my DD as well. I cant see my project starting for another 2 years or so because I am leaving to serve a mission for my church for two years. Thats right I am LDS.   

[Billy_Goat]

Another newbie here. I'm building my 89 truck to be more rock worthy and I look forward to learning all I can

[Michael Avant]

My name is SGT. Michael W. Avant. I have a 1974 Jeep CJ-5. It has the model 20 transfer case. When I shift it into 4 high the front and rear drives shafts lock in like they are supposed to. When I shift it into 4 low the rear drive shaft locks in but the front one doesn't.
I have never heard any whining or grinding noises in the transfer case. I did however take the shifting rod off of the transfer case one time to paint the inside of the jeep.
I just can't figure out what is wrong with my jeep. If anyone out there knows please help me. I would really appreciate it.
I just put brand new Warn locking hubs in. But I know that that isn't the problem. Please help. Michael Avant

[jss]

Well as you can tell 1st post and oh boy another newbie, moved to Colorado from south central Texas, pretty much stopped rodeoing and beings I live just 97 miles from Moab guess I better stop rodeoing and start wheelin.  Startin on a build up I guess; 94 Toy with 22RE rebuild, 5 speed, and completely stock.  So guess I'll be droppin bout 5 grand to the Marlin boys to get started.  Laters!!

[86rustbucket]

My name is SGT. Michael W. Avant. I have a 1974 Jeep CJ-5. It has the model 20 transfer case. When I shift it into 4 high the front and rear drives shafts lock in like they are supposed to. When I shift it into 4 low the rear drive shaft locks in but the front one doesn't.
I have never heard any whining or grinding noises in the transfer case. I did however take the shifting rod off of the transfer case one time to paint the inside of the jeep.
I just can't figure out what is wrong with my jeep. If anyone out there knows please help me. I would really appreciate it.
I just put brand new Warn locking hubs in. But I know that that isn't the problem. Please help. Michael Avant

sell the heep  and buy a toyota   problem solved

[Noahrob]

Hi Guys,

I am new to posting to this forum, although I have read many great threads in the past. I am located in Goleta, CA and have a SAS'd 89 4runner...thanks for all the great info.

Noah

[ssicoffroadshop]

new to Marlin been on Pirate for years almost 600 post there and not stupid . I'm in Sac got a couple rigs 86' 2 wheel made 4x4 22r, doules, 35's. 83 small block 350, 350,205, going double cases just ordered the adapter, toy axles w/chromo's, 40's exoed, 1990 runner soon 5.7 4l60e,205 toy axles chromo's, on and on. Starting F-toy

[89_toy]

hey im new here, i have a 89 toyota extended cab with about a 5 inch sus. lift and 3 in. body. ive been running 35s but recently got a set of 39.5/18/15. they dont fit with the current lift so im thinking of getting rid of the ifs but im not to sure were to start. hopefully i can find some good information here on how to do the swap.