ATTENTION ALL NEWBIES READ THIS FIRST

[84runner]

There are three important things to consider as a new member.

1) Private Messages. Due to new members sending spam to existing members via Private Messages, you must establish yourself as someone who desires to participate here by reaching a small number of posts in order to Activate the Personal Messaging feature of the Forum. Also, Don't Reply Directly To Notification Emails! See this thread for more info.


2) The Classified. Again, due to new members creating new threads in the Parts for Sale and Rigs for Sale Forums regarding non-Off Roading items, you must establish yourself as someone who desires to participate here by reaching small number of posts in order to Establish Access to these two Forums.


3) Picture Attachment. In order to use our picture and file attachment system, you will need to advance to the 2nd level member group. This is achieved by amassing a certain number of post count so that we know you are here to stay and not here to spam. The best way to do this is to post an Introductory thread in this board so everyone can get to know you! Click here to do that now!


4) Watch this before posting ! (requires Flash)
http://board.marlincrawler.com/temp/Posting.swf


EDITED by BigMike

[WHITE_TRASH]

I know what that one is.   That should very well be required viewing before the first post is submitted.  Mikey can ya hook that up??  Pretty please!?

[84runner]

Come on Mikey it's heading to the bottom already

[KYOTA]

Thats not just for noObs 

[BigMike]

STICKY!!!!

[Mike D]

looks kinda gooy to me





This is my 800th post 

[BigMike]

This is my 800th post

[Mike D]

yeah! yeah! I know i d master of postage

[Roktoys84]

Bahhaaahhaaa. I just saw this. Thats funny stuff.

[HaloFan1]

hey guys im a noob 2 the forums.and yes i did watch the video!lol.i have a 91 yota pick up with a 4 in. pro comp IFS lift along with a 3 in. body lift.i am currently running 33x12.50 BFG muds.im a 20 year old student from georgia.i am currently researching about the SA swap.this is going to be a must because my truck is just not big enough.i dont do much offroading as it is but im sure ill get into the game when i have the truck built the way i want it.

[gonzo]

Howdee I'm another noob to this site and fourwheel'in too (only about six years).  I have a 86 4 runner.  3" lift. 4:88's, detroit in the back and tru track in the front.  I just purchased a dual crawler from marlin. I am in the process of looking for a doner transfer C.  I am totally impressed with Crawler and his reputation.  I hope this group does'nt mind as few questions.

[FATB0Y]

 

[Tice]

Noob here!! From southern AZ. Got an 85 Xtra cab toy with the goodies ( minus crawler gears, they are on the way ). Can't watch the vid cuz I still have dial-up, can't get anything else where I live!!!!!!!       Anyways 

[Willy Mammoth]

Download this and install it Microsoft power toys image resizer. All you need to do is rite click the picture file and choose resize.
http://download.microsoft.com/download/whistler/Install/2/WXP/EN-US/ImageResizerPowertoySetup.exe

Happy resizing and posting

[countrygirl]

ok yeah im new, my friends told me about this site. so yeah i hear 4 wheeling and i come running! but yeah im just looking to buy a truck and build it up. then take it out with the big boys!!

[toybuilt]

I'm a noobie, but I've been wheelin since I got my toy 3 years ago. Its a 83 Toyota pickup longbed bobbed 18 in. I have a 2" body lift, 64" 3 leaf chevy springs in the rear and rancho 44044's in the front. My running gear starts with my 22r with these upgrades; a full header and exaust system from Downey, a stage 1 trd cam, flex a lite electric fan, and K&N air filter. Then I have a w56 Trans and dual cases with a 4.7 and twin sticks. For axles I have a narrowed Dana 44 in front with 5.89 gears and a ARB air locker and for the rear I have a Dana 60/ toy hybrid with 5.89 gears and a ARB air locker. For now I'm running 36" TSL's

[sloyota]

new newbie hear.   I drive a 88 yota bobbed bed 4" pro comp lift,header, flowmaster,Stubbs rocksliders,steel rockcrawlers with cheap 32" mudders by summer 05' I'll be done with a SAS,cromo axles detroit 4:88's with 5" 44044 springs same for the rear,all pro roll cage,36x12.50-15 tsl/sx,t.c reduction 4.7 marlin crawler,high angle driveline driveshafts,and last but not least a 4.3L v6 vortec s-10 motor. and how knows what else.

[bibi]

well well well you all seem to have loads of fun and that little boy needs some 
manners

[Mnmstoy]

New here....just looking and checking things out. I have a 80 toy with a few mods. Bobbed bed 13inches,handle throttle,4inch junkyard lift with blocks out back. Running 33 Maxxis buckshot mudders.

[Freeyoda]

Newb here. Was a TLCA member from '92 through '01. Sold my '64 fj40 a few years ago. Last Christmas bought myself an '85 pickup that already had 33's and a 3" body lift. Has a Chevy V6 bolted to a TH350. All stock diffs. Changed them to a electric locking 4.56 in the back. Borrowed a friends nearly new 4.56 r&p for the front. Hope to put another electric locker up front end when the big money falls into my bank account (yeah, like that's going to happen).

[Freeyoda]

Never actually crawled with Marlin, but we were at the same TLCA event in '92 where I was doing safety checks. He was so nice to weld Dave Rethoret's trailer hitch back on. Good 'ol Marlin lit up that welder right in camp and stick welded that sucker right back in place. Ya just have to respect a fellow wheeler when he is so well prepaired and willing to lend a hand.

[jeeeepspaynker]

I'm a noobe here.Been wheelin for a long time.I have an "85" 4runner with a 4" lift, 32s. New motor and 5speed.Now I'm going to put some Marlin Crawler stuff on it.All it takes is money

[FATB0Y]

  all newbeez

[bunnyfart]

hello everyone im a newbie.  my name is mat.  i am in desparate need of a rig.  dont have one yet but need one.  i have an itch to get to the rubicon with my buddies.  if any one can help me that would be great.  my spending limit however is 2500.  or that plus a 1990 honda civic SI for trade.


MAT

[bunnyfart]

my email is [email protected].  if anyone can help.

MAT

[toywthbdydmge]

Hey whats up Im new to the site.I drive a 80 TOYOTA with a flat bed bobbed it has a  22r with thorally header,2 1/2piping to a flowmaster a 1986 four runner tranny, 488 gears with a DETROITin the rear and EZ locker in the front.It also has 35 inch Pro Comp mudds.I love to wheel and Im not scared of body damage or rolling over.As a matter of fact the more rollovers or body damage the more I love my truck.Oh yeah I also drive my truck to every place I wheel> I refuse to tow it!!!!!!

[green apple]

hay i'm new to the scene also. I have an 85 runner with allpro 5 1/2 long travel springs, ez locker in front, 5:29 gears, 22re stock motor and 37 boggers. I'm still in the proccess of building her but she is comming along. I hope to be getting my daul tcases here shortly. I'm really looking forward to the rubicon this spring and season.

[rhundl]

hello everyone, new to the site here. just got my first toyota , its an 81 pickup w/ 3in lift and 31's. mostly bone stock, but the price was right. future plans include 14bolt ff rear w/ quarter elliptical 4 link triangulated supension and probably coil over front w/ dana 44/60, depending on what I  can find, anyways happy posting later

[mplatzer]

  to all newbs..  once again, dont ask stupid questions

[FATB0Y]