87 bobed Runner build

[mayberry]

17's are where its at! same style of wheels I have, looks like more backspacing though

ya its too much i rub my front liefs bad like almost un drivable deffinatly un wheelable right now

[pumkin toy]

3" spacers    is your shifter popping out of the top plate where the c-clip holds it in?

[pumkin toy]

ya its too much i rub my front liefs bad like almost un drivable deffinatly un wheelable right now

that sucks man, mine are 2.5" backspace with a 1.5" wheelspacer.  It gets really close, but I dont rub anything at full lock

[mayberry]

no it came out of the forks and i had to shift into 4wd with a screw driver

[mayberry]

thats what i want i want it soo close but not touchin

[swapped89]

NIce flex pic! havent read the thread yet, but now im interested in whats goin on.

[mayberry]

ya i think its a cool build

[pumkin toy]

no it came out of the forks and i had to shift into 4wd with a screw driver

So it came out of the forks, but the shifter didnt actually pop out of the cover plate?

[mayberry]

ya it just came out of the forks so i had to pull the whole thing off and shift and bolt it back on

[pumkin toy]

thats weird, never heard of that.  I dont understand how it could come out of the forks without the whole shifter popping out...weird.  Could a small keystock be welded in somewhere to help prevent that?  idk if that would work at all, cant picture it in m head right now.

[mayberry]

ya strange i was just thinking about goin twin stick and just not have the 2wd low option right now because i dont want to pull my case back out until i do a clutch or go duals like i want to do eventually

[mayberry]

i even got my firechicken back up and runnin ill have to post a few pics of her  ill take some in the mornin

[mayberry]

i know its off topic but here is when i got my chicken
and ill post some more pics tomorrow

[Yota87Truck]

Dang, that's sweet!

[THK Matt]

damnnnn SICK RIDES mayberry! the 39.5s look dope and the van halen striping is souped.

[wakkjobb]

Dual quads? What engine does that bird have? And do I spy Chevy Rally wheels? Those look sweet on there!

>>Dan

[mayberry]

the dual quads where just a little too much for it so i stepped down to on single deamon 650 with a victor Jr then i decided to build my heads and now i am running a weand team G intake with a 750 holly dual feed with a trick kit i punched my heads out to 2.02s and put screw in studs and guide plates.1.5 rollor rockers .110 over i belive push rods, comp 292, 505 cam
its bored .60 over with forged keith black piston tops a bunch of stuff for sure in the last month i have thrown around a grand at it and that didnt include any engine work or anything under the carb and between me and my buddy we have done all the work so the grand in just parts lo labor   

[richardmud]

yo wtf dude those tires do look sick and i tryed to call you on the sopacers the nite i seen them and i guess heath told you and now you have them right hope they are working good are you going to to run the snow tommrow or work ?if so see you then+

[NITE KRAWLERS]

Runner looks good wit the 39's and the paint job is cool weird dude!!

[YotaNate]

If I am not mistaken the paint job is derived from Edward Van Halen's Guitar.
http://www.vintagekramer.com/5150f.htm

Ahh the memories....



Nate

[THK Matt]

If I am not mistaken the paint job is derived from Edward Van Halen's Guitar.
http://www.vintagekramer.com/5150f.htm

Ahh the memories....



Nate

2nd Toyota on this board I've seen it done on.

[mayberry]

ya  i saw it on another truck on the board but it was all free hand i think the other truck was a car wrap thing but it has been a while since i saw that build

[NITE KRAWLERS]

ya  i saw it on another truck on the board but it was all free hand i think the other truck was a car wrap thing but it has been a while since i saw that build

Ya i belive it was a wrap and that dude sold his runner awhile ago and I have not seen it since!! But ya totally the guitar for shur>>>>

[mayberry]

i got some 2" spacers and have already traded one set for a set of 1.5 in for the rear and there still a little bigger then i want to go so i need to trade them for some 1" spacers

[IVrunner]

i really dig the added door - good work!

[mayberry]

thanks man its still not complete but close i just have to build a better hinge for it and it will be done  with a little body work
i just got done changing my clutch (the easiest clutch i have ever done) and it works so much better 

[86bobbedtoy]

sweet

[4x4yota]

i got some 2" spacers and have already traded one set for a set of 1.5 in for the rear and there still a little bigger then i want to go so i need to trade them for some 1" spacers

I have a set of 1" spacers Ill trade for your 1.5" PLEASE

[Greiner]

anything new this is a sick rig!

[Jud]

Cool Runner, I've seen it around Oroville