Author Topic: anything you have FABBED (Read 116295 times)

junya92toy · « **Reply #180 on:** Jul 02, 2011, 06:05:32 PM »

fugly ahha

boggerunner · « **Reply #181 on:** Jul 08, 2011, 05:54:08 PM »

here is an optime red top battery box i cut on my plasma table and bent up.

4LoRunner · « **Reply #182 on:** Jul 08, 2011, 07:00:36 PM »

Now that clean. How much for one?

boggerunner · « **Reply #183 on:** Jul 08, 2011, 08:40:07 PM »

Quote from: 4LoRunner on Jul 08, 2011, 07:00:36 PM

Now that clean. How much for one?

PM'ed

boggerunner · « **Reply #184 on:** Jul 11, 2011, 05:00:26 PM »

and some different tops for them

and some key chains im workin on.

86YotaKing · « **Reply #185 on:** Jul 11, 2011, 08:28:45 PM »

Quote from: Duffil on Apr 09, 2009, 01:31:05 PM

fixed

good work

4LoRunner · « **Reply #186 on:** Jul 12, 2011, 02:52:07 AM »

those are clean im diggin the toyota logo, how big are the key chains? what about a toyota logo or some crawlers for some key chains, throwin you some ideas

Yota Rolla · « **Reply #187 on:** Jul 18, 2011, 02:18:48 PM »

I'm going to barrow your key chain idea maybe play with the plasma tonight if i succeed ill post pics

John Doe · « **Reply #188 on:** Jul 18, 2011, 03:06:18 PM »

I am loving the key chain. An idea, incorporate some sort of bottle opener and or flat bladed screw driver edge.

boggerunner · « **Reply #189 on:** Jul 18, 2011, 03:32:27 PM »

im gonna make it open bottles, just need some spare time to play with it.

Snowtoy · « **Reply #190 on:** Jul 31, 2011, 01:51:41 AM »

I put this safari rack together for a buddy's bronco this past spring.

Size is 72"x54"x6", with 4 light mounts(2 front/rear), a CB antenna mount on the right side, and a shovel mount.

The rack is made up of a combo of 1/2" and 1" galvanized electrical conduit, and two 5' sections of 1"x1" steel tube for the two crooss mieces that mount to the side gutter mounts.

The mounts are a two piece design made from 1/8" diamond plate and .095 plate. The clamp section of the mount is a two piece hinged set-up(to aid in removal yet keep the brackets attached to the rack). I used a center adjustable bolt to tighten the hinged clamp to the gutter, and two bolts(1 on each side) to bolt the clamp to the main section. I used some 1-1/4" round tube in a clam shell design with hitch pins attached to some chain for the shovel mount. You can easily remove/mount the shovel even with thick snow gloves on.

About 3 weeks after I finished it, my buddy decided to trade his Bronco to a guy in TN for this linked '85 on 1 tons.
Pics and full specs here 1985 Toyota X-cab. Even though he had to meet the guy half way in Texas, given what the Bronco needed to be truly trail ready, I think he got the better deal.

Zs Confederate Toy · « **Reply #191 on:** Jul 31, 2011, 10:38:36 PM »

Looks good. That EB is pretty clean too

*** YELLER *** · « **Reply #192 on:** Jul 31, 2011, 10:51:24 PM »

nice

4RunnerChevy · « **Reply #193 on:** Aug 22, 2011, 05:01:58 PM »

Gotta pull my T-case, so I pulled this outta the "field of dreams". It has pulled many a case and tranny. 12v actuator, some unistrut and rollers. It can lift about 1/2 ton, and roll. 3/16 thick 316 stainless top 9" to 24" scissor. Made in 4 hrs, didn't cost a dime, a true G job. True Booty fab at its finest.

Thats 3/4 solid, it bent like nothing.

Extended

Vid
http://www.youtube.com/watch?v=0Pd9oynYtcQ

Zs Confederate Toy · « **Reply #194 on:** Aug 22, 2011, 10:48:41 PM »

I like that idea. Looks better than a floor jack and a ratchet strap

Gixxer Jon · « **Reply #195 on:** Aug 23, 2011, 12:10:44 AM »

theslayer85 · « **Reply #196 on:** Oct 07, 2011, 09:22:53 PM »

that is a nice rear bumper simple and clean. You must do this enough to justify a tig welder.

Gixxer Jon · « **Reply #197 on:** Oct 07, 2011, 10:43:43 PM »

Quote from: theslayer85 on Oct 07, 2011, 09:22:53 PM

that is a nice rear bumper simple and clean. You must do this enough to justify a tig welder.

Thank you! I love my Miller tig, ive only been tig welding as a hobby for almost 2 years now. I prefer to tig over mig any day of the week.

OldGold3VZE · « **Reply #198 on:** Oct 09, 2011, 07:11:33 AM »

Beefy slider mounts...

Front frame crossmember with sleeved stinger mount through it...

Dual case mount/skid plate...

And the mounts...

This chopped runner and cage are mine, too...

boggerunner · « **Reply #199 on:** Oct 25, 2011, 04:57:37 PM »

here is my favorite top for the optima battery boxes i make

BPINAZ · « **Reply #200 on:** Oct 25, 2011, 05:03:08 PM »

Those battery boxes are awesome, you gonna sell'em?

boggerunner · « **Reply #201 on:** Oct 25, 2011, 05:05:07 PM »

sure, pm me

1983bamayota · « **Reply #202 on:** Oct 28, 2011, 08:58:24 AM »

The first bumper I've built. p.s. I know I need tires, that is next.

BadnewsBob · « **Reply #203 on:** Oct 28, 2011, 11:09:17 AM »

Couple things I've put together.....

83 Crawler · « **Reply #204 on:** Oct 28, 2011, 12:29:40 PM »

Quote from: boggerunner on Jul 08, 2011, 05:54:08 PM

here is an optime red top battery box i cut on my plasma table and bent up.

how much for one?

BadnewsBob · « **Reply #205 on:** Dec 03, 2011, 03:55:44 PM »

Some stuff I am helping with in a friends shop.

boggerunner · « **Reply #206 on:** Dec 04, 2011, 09:55:41 AM »

here are some sbc motor mount plates i cut out on my table, these are for a 5.7 going in my fj80 project

and some 63" chevy hangers i built too, the swag press brake works awsome

ryan_ackerman · « **Reply #207 on:** Dec 04, 2011, 10:00:47 AM »

theslayer85 · « **Reply #208 on:** Dec 06, 2011, 01:52:53 PM »

Quote from: ryan_ackerman on Dec 04, 2011, 10:00:47 AM

nice work. You either have way to much time on your hands to drill dimples in the front cross brace or you found some sweet looking tube steel. I like the rose, I have made a few of the copper roses before but I like the base with the horse shoe.

Gixxer Jon · « **Reply #209 on:** Dec 06, 2011, 02:36:21 PM »

Quote from: theslayer85 on Dec 06, 2011, 01:52:53 PM

nice work. You either have way to much time on your hands to drill dimples in the front cross brace or you found some sweet looking tube steel. I like the rose, I have made a few of the copper roses before but I like the base with the horse shoe.

He welded expanded metal to the front of his hanger to give it that look you can tell by looking at the picture.

Related Topics