anything you have FABBED

[86moneypit]

More

[hilux-1983]

More

More

FWD them plans. It looks interestingly smokeable:-)

[Zs Confederate Toy]

Fabbing up a new base plate for a used set of FROR twin sticks I bought. They were for a Taco and they will be for a top shift behind a W56 when I am done

[Snowtoy]

Center console/rear shelf and rear speaker mounts for an '85 2wd I am restoring,

[Zs Confederate Toy]

Here's the rest of the plate, it works greatly. I did it all for pretty much free, aside from the hole saw that I had to buy.

[theslayer85]

what do u want to know?
here are some more pics



I am not sure why I cannot see any pics at all.  It may just be my computer.

[theslayer85]

Ok so it was just my computer. Darn work blocking it. It is like I should be working at work or something.  I have always wanted to build a long travel toy after I finish my crawler. I have seen several people who build them out of plate and tig weld it all. Ant they turn out great. Is it still 4 wheel drive?  I am not seeing where the blue set go in the set up. 

[boggerunner]

its 2wd, and the blue arms are the uppers

[megaphoneman]

Been working on my f150 alot more then my toyota lately..

blahhhhhhhhhhh

[boggerunner]

I like the bumper, who's lt kit is that?

[megaphoneman]

Its a dirt tech race kit.. fully fabbed uppers/lowers/ spindle. All uniball/heimed.. and 4130.. and thanks.. im trying to go for a different style then normal prerunner status..

blahhhhhhhhhhh

[megaphoneman]

Full extension.. full bump..

blahhhhhhhhhhh

[twistedtoy92]

Looks badass! You sticking the 5.4 back in it or whats the plan?

[megaphoneman]

Looks badass! You sticking the 5.4 back in it or whats the plan?

no its a built ls1 and th400 combo..

blahhhhhhhhhhh

[megaphoneman]

Its in there some were

blahhhhhhhhhhh

[twistedtoy92]

Very nice choice in drivetrain! You have a build thread on that thing?

[megaphoneman]

Very nice choice in drivetrain! You have a build thread on that thing?

yeah the most up to date one is over at desertrangers...ill get a link..

blahhhhhhhhhhh

[megaphoneman]

http://www.dezertrangers.com/vb/showthread.php?t=120098

blahhhhhhhhhhh

[theslayer85]

A hot rod wagon I built for my son.  The only down side to it is that it is heavy.  My son will ride in it for a few minutes then wants to pull it.  I saw something like this on a web site and decided to build one.  I still have some welds to clean up before I can paint it.  This was also an exuse to learn how to TIG weld, I used TIG for the entire thing. 

[theslayer85]

The steering.  It took a few tries to get the steering to track straight.  I machined little tie rods and have a left and right hand thread on each one, so I just loosen the jam nut, twist the tie rod and I can align the wheels. 

[Wainiha]

Heim steering on a wagon?  Your son is one up on me already...

Is that a kingpin axle too?

[theslayer85]

Yeah, now if I can get my crawler finished like this one is. It is a 1/2 inch bolt that i ran through both the steering C and the axle C with a nyloc on the other end.  I know trucks so when I designed it that made the most sence to me. 

[twistedtoy92]

Turbo swap on my Audi A4

[Lawdog188]

Nothin too crazy lately,

[megaphoneman]

Getting my other truck all buttoned up...

blahhhhh

[OldGold3VZE]

Some sliders for a 1st gen runner. 58" main slider bar, kick out bent to 116 degrees, notched at 35 deg and 40 deg, 2 35 deg supports, and the outside slider bar bent to 35 deg, and notched 50 deg where it meets the kick out.

[HogCanyonHopper]

sweet design with the kickout. very well done   

[OVRAROK]

Was bored today so I built a heat exchanger

Sent from my HTC One using Tapatalk

[HogCanyonHopper]

sweet! whats that for?  haha

[OVRAROK]

my on board shower