Topic: Colorado 4Runner Jamboree July 31st, Aug 1st & 2nd 2009!!

[toytank]

ive got a 4runner truggy dual tcases 4.7s  529 gears  with arb and longs alcan leafs up front and fox air shoks rear on 42" irocs

[toytank]

i think i will plan on running with you  we have never been down there i will make it there friday afternoon. the 4runner in my pic will be there its not as built i sold it to a kid in co springs but it has stock duals and 5 29 stock birfs on 35 its the least built rig coming with us{full bodied} i took it through ebery trail around here but he is a nebe to the sport and has a harder time with wheeling

[854RUN]

i am running
holy cross on Friday
BV Carnage on sat
Sunday

[Volcom [OP]]

ive got a 4runner truggy dual tcases 4.7s  529 gears  with arb and longs alcan leafs up front and fox air shoks rear on 42" irocs

Sounds good.  I read your signature and it said "new truggy on the way....." and didn't know if it was still in process and you'd be driving the yellow 4Runner in your avatar.  You'll be fine on BV Carnage with your setup

[toytank]

i need to swap my avitar  i just like that pic

[Volcom [OP]]

i need to swap my avitar  i just like that pic

We'll get you a wheelstand pic like mine in a couple of weeks

[boggerunner]

lid pics are cooler

[toytank]

volcom are you with the rock frogs club

[Volcom [OP]]

volcom are you with the rock frogs club

Yeah!  Good group of guys to wheel with!

[toytank]

i was looking at there website and forum id like to join a club  i  i own rock solid motorsports in gj and work in the oilfield so i stay real busy i dont know how many events i can really make it to. but i think i might join anyway well see they seam like a good group.

[toytank]

phil you coming to the shop to night

[Volcom [OP]]

As of right now, I'm out  

Ended up having the worst trip ever on Blanca this weekend
http://www.rockfrogs.org/phpBB3/viewtopic.php?f=13&t=3220

My driver side knuckle has a broken ARP stud & a stripped hole.  Only got 2 solid studs on that side.  I need to find another driver side knuckle and tear apart the frontend.  I doubt that will happen in 2 weeks.  

Sucks, I was really looking forward to getting out and wheeling with everyone on the Marlin board.  

[854RUN]

well its looking like i am out as well my wife's grandfather passed so we will be heading to Albuquerque on Tues... and will be there for a week so there goes my wheelin trip money. Plus i just had to take my 37's off my runner and put them on my t100 and the t100's tranny is making all kinds of noise this suck maybe i can run out for a day and do a run in Big T if the tranny holds,  i really wonted to run carnage 

Looks like yall had a good time Volcom

[Volcom [OP]]

well its looking like i am out as well my wife's grandfather passed so we will be heading to Albuquerque on Tues... and will be there for a week so there goes my wheelin trip money. Plus i just had to take my 37's off my runner and put them on my t100 and the t100's tranny is making all kinds of noise this suck maybe i can run out for a day and do a run in Big T if the tranny holds,  i really wonted to run carnage 

Looks like yall had a good time Volcom

Sorry to hear about the grandfather.

[toytank]

volcom what parts do you need . a pass knuckle,regular studs would get you by for a  weekend your looking 20 min of work if that. ill double check but i should be able to hook you up and we can put it together at camp

[Volcom [OP]]

volcom what parts do you need . a pass knuckle,regular studs would get you by for a  weekend your looking 20 min of work if that. ill double check but i should be able to hook you up and we can put it together at camp

Thanks for the offer!  I said passenger in my first post but it's actually a driver side knuckle.  I've got my stock studs and 3 of the 4 ARP's are still good.  I can't figure out why they are loosening on me?  Maybe I need to buy some new nuts?  I used anti-seize on the cone washers to make it easier to move them rather than having them rusted inside the arms.  Do you think the anti-seize is causing the problems?  Maybe new nuts and double nutting them?

I'll let you know if I still plan on going.  It was a rough weekend and I'm still kinda burnt on working on rigs all weekend rather than wheeling.

[toytank]

 i wouldnt use anti seize  but let me know if you need some parts like i said we can put it together on the spot. 

[Matty]

I'll let you know if I still plan on going.  It was a rough weekend and I'm still kinda burnt on working on rigs all weekend rather than wheeling.

Come on man!  it's just a knuckle, they aren't that bad to replace.  Is Jeff planning on going still? 

[COToy91]

Thanks for the offer!  I said passenger in my first post but it's actually a driver side knuckle.  I've got my stock studs and 3 of the 4 ARP's are still good.  I can't figure out why they are loosening on me?  Maybe I need to buy some new nuts?  I used anti-seize on the cone washers to make it easier to move them rather than having them rusted inside the arms.  Do you think the anti-seize is causing the problems?  Maybe new nuts and double nutting them?

I'll let you know if I still plan on going.  It was a rough weekend and I'm still kinda burnt on working on rigs all weekend rather than wheeling.

What are you torquing them too? stock 80Ft/lbs or the 100-110 that brian at FROR says too?  Do you have the trail gear ones? My ARP studs from FROR came with special locking nuts. I also have a knuckle if you need it.

The man who planned it all has to be there. Who will run the raffle?

[wakkjobb]

COToy, you still have an open seat?

>>Dan

[COToy91]

COToy, you still have an open seat?

>>Dan

I got some bugs and loose ends to tie up, but yes. I even drove it to work today

[wakkjobb]

That's  ... hope you can get them bugs out; I used Raid... 
Keep a fool posted!!
>>Dan

[COToy91]

I'm off tomorrow so it will be  by the end of the day

[toytank]

i drove mine for the first time ever last night verythin seams to be ok

[COToy91]

So who all is going now?

Me
Wakkjobb
Toytank
Boggerrunner
Jarboarder
Matty (I think)

anyone else

[toytank]

bogger runner and i are for sure, maybe one more rig from gj

[COToy91]

bogger runner and i are for sure, maybe one more rig from gj

are you coming Thursday night do holy cross on friday?

[boggerunner]

we both have to work friday

[Matty]

So who all is going now?

Me
Wakkjobb
Toytank
Boggerrunner
Jarboarder
Matty (I think)

anyone else

Yea, Ill be there with my truck but not wheeling it.  I'm gonna hop into jareds rig for wheelin.

[toytank]

ill be leaving on friday and get the friday afternoon