Author Topic: TWISTEDTOYS 92 SAS-->7MGTE/R151F SWAP and FJZ80's in the works (Read 149532 times)

TheCookieMonster · « **Reply #390 on:** Mar 27, 2009, 09:22:02 PM »

well if your not going to dd it for not much longer then your good

if your on the rocks a lot i would go with the Iroks, they also do pretty damn good in the mud too. The Iroks are a lot cheaper than a lot of other tires in the 39.5 flavor. check out 4wheelparts.com they got some pretty good deals.

as for the poll thing i dont have a clue

THK Matt · « **Reply #391 on:** Mar 27, 2009, 09:51:23 PM »

www.4wheelparts.com has the cheapest Iroks.

twistedtoy92 · « **Reply #392 on:** Apr 03, 2009, 10:18:02 PM »

here are a few pics of todays little run.... got my front driveline to seperate climbing a nice rock wall and got her hoppin' and flopflop! LOL! just backed down, put her on the flat, jacked the front off the ground, phased the driveline and popped them back together! back on the trail! Niceday of wheeling! $Beer Chug\'n$

twistedtoy92 · « **Reply #393 on:** Apr 05, 2009, 11:41:03 PM »

Here are a few from today.... creepn nice and slow

enjoy! $Beer Chug\'n$

here is the front shot lookin up at it

here is the side view of the picture above standing on level ground

workin great.... except i seperated my front DL 3 times today!!! The last spot was climbing up a 30 degree hill with a 3 foot boulder at the top that I managed to roll over and get my drivers tire jammed between the huge rocks and popped the DL apart......... It was a blast though!!! damn thing does very well for a daily driver...

unclejpl4x4 · « **Reply #394 on:** Apr 06, 2009, 04:06:20 AM »

so thats what my truck should look like thx

nice shots bro

twistedtoy92 · « **Reply #395 on:** Apr 06, 2009, 06:39:02 AM »

exactly! Thanks for the comments! I need lockers and gears BADLY............. $I\'m Down$

82 HiLux · « **Reply #396 on:** Apr 07, 2009, 12:53:15 PM »

looks like your gas tank skid plate hits your driveline when you flex it out hard. maybe you should "massage" the skidplate with a hammer lol

i love those swampers those are the sickest

twistedtoy92 · « **Reply #397 on:** Apr 13, 2009, 02:00:06 PM »

yeah it rubs slightly, i will give her a "massage" today! I also pulled my hubs apart again and repacked my bearings.... sine i was that far i pulled my backing plates off and modified them!!! ALL GONE! then i cut the brake line mount off of them and welded them onto my steering arms, looks way better and now i dont have to worry about filling them up with mud and debry!

I just ordered (5) 37x12.50x15 IROKS + 2 more soft 8's------$1961!!!!!! WHOA!!!!!! I CANT WAIT!!!!!

Stay Tuned

TheCookieMonster · « **Reply #398 on:** Apr 13, 2009, 06:02:47 PM »

nice. i would have went with the 39.5's though. the 37's only measure out to about a 34.5 with full pressure, plus they dont give much ground clearence. just thought i would let you know

twistedtoy92 · « **Reply #399 on:** Apr 13, 2009, 09:08:57 PM »

i am still streetin it for a while..... i can sell these to my dad after a few months and to let you know, they measure out a 36.9 inches at street pressure.... they are not bias, they are radials!!! should work alot better than these 1990 edition 36x12.50x15 super swamper tsl sx's that are BALD! those 39.5's are the next set but the price difference for 5 tires is very large.......

TheCookieMonster · « **Reply #400 on:** Apr 13, 2009, 09:35:44 PM »

alright, i didnt know you were getting radials so you got me on that one

.. good deal man, it will be nice to have some new meats $Beer Chug\'n$

twistedtoy92 · « **Reply #401 on:** Apr 13, 2009, 09:56:39 PM »

hell yeah... i really wanted to go bigger but i dont have gears yet or longs so..... i need meats and a longer spline on the front DL so..... money is tight!! Are you runnin 38's on your rig?

TheCookieMonster · « **Reply #402 on:** Apr 13, 2009, 10:03:43 PM »

im runnin 37x14 bias Iroks.. i really like them but wish i had some more axle clearance. seems like my axles are always dragging on something

twistedtoy92 · « **Reply #403 on:** Apr 13, 2009, 10:06:11 PM »

yeah 42's would be ideal but money doesnt grow on trees.... at least not legal ones! LOL! $Beer Chug\'n$

NorCalToy · « **Reply #404 on:** Apr 13, 2009, 10:49:00 PM »

Quote from: twistedtoy92 on Apr 13, 2009, 02:00:06 PM

yeah it rubs slightly, i will give her a "massage" today! I also pulled my hubs apart again and repacked my bearings.... sine i was that far i pulled my backing plates off and modified them!!! ALL GONE! then i cut the brake line mount off of them and welded them onto my steering arms, looks way better and now i dont have to worry about filling them up with mud and debry!

I just ordered (5) 37x12.50x15 IROKS + 2 more soft 8's------$1961!!!!!! WHOA!!!!!! I CANT WAIT!!!!!

Stay Tuned

sickkkk ETA yet? truck is loookin awesome dude.

Quote from: twistedtoy92 on Apr 13, 2009, 10:06:11 PM

money doesnt grow on trees.... at least not legal ones!

sig worthy

twistedtoy92 · « **Reply #405 on:** Apr 14, 2009, 10:26:48 AM »

WELL..... got a phone call this morning....

they sold the last two rims so i got the other style of rim (not that much different)
37's are FOUR WEEKS OUT so....... I bit the bullet and ordered five 39.5x13.50x15 IROK BIAS PLY!!!

So in a week and a half to two weeks I'll be rollin on 39.5's~ I am stoked....... $Beer Chug\'n$

TheCookieMonster · « **Reply #406 on:** Apr 14, 2009, 11:14:52 AM »

$Beer Chug\'n$

THK Matt · « **Reply #407 on:** Apr 14, 2009, 11:23:37 AM »

Quote from: twistedtoy92 on Apr 14, 2009, 10:26:48 AM

WELL..... got a phone call this morning.... they sold the last two rims so i got the other style of rim (not that much different)
37's are FOUR WEEKS OUT so....... I bit the bullet and ordered five 39.5x13.00x15 IROK BIAS PLY!!!

So in a week and a half to two weeks I'll be rollin on 39.5's~ I am stoked....... $Beer Chug\'n$

SIIIIIICCKKKKK!!!!!!

i'm jealous bro.

NorCalToy · « **Reply #408 on:** Apr 14, 2009, 02:43:30 PM »

Quote from: twistedtoy92 on Apr 14, 2009, 10:26:48 AM

WELL..... got a phone call this morning.... they sold the last two rims so i got the other style of rim (not that much different)
37's are FOUR WEEKS OUT so....... I bit the bullet and ordered five 39.5x13.00x15 IROK BIAS PLY!!!

So in a week and a half to two weeks I'll be rollin on 39.5's~ I am stoked....... $Beer Chug\'n$

good choice.

shouldnt have to do anyhting for em to fit do you ?

twistedtoy92 · « **Reply #409 on:** Apr 14, 2009, 05:05:58 PM »

thanks guys..... yeah its a lot of money but if i'm gonna spend it.... what better than a set of 4dee inch IROKS?

They should fit just fine, but I will need to tub the rear wheel wells and the fire wall up front for full flex...... gonna look BADASS rollin on 39.5's!!!

82 HiLux · « **Reply #410 on:** Apr 14, 2009, 06:34:03 PM »

im not jealous at all.

twistedtoy92 · « **Reply #411 on:** Apr 14, 2009, 06:53:19 PM »

i dont care if anyone is or isnt..... i'm just happy to get new rubbers and have a full size spare finally!!!
$Beer Chug\'n$

THK Matt · « **Reply #412 on:** Apr 14, 2009, 08:03:43 PM »

guna be sick as

bro.
we gotta wheel this summer

46&2 · « **Reply #413 on:** Apr 14, 2009, 08:07:40 PM »

Sweet dude. Iroks are going to look sick. I need to get some for myself but I will probably end up with your original choice in the 37 inch flavor

twistedtoy92 · « **Reply #414 on:** Apr 14, 2009, 08:30:46 PM »

Quote from: ThatIDAHOKid on Apr 14, 2009, 08:03:43 PM

guna be sick as bro.
we gotta wheel this summer

Hell yeah!! I'll have 5.29's and lockers by then and hopefully at least the cab caged!

Quote from: fortysixandtwo on Apr 14, 2009, 08:07:40 PM

Sweet dude. Iroks are going to look sick. I need to get some for myself but I will probably end up with your original choice in the 37 inch flavor

Yeah it ended up the radial 37's were alittle more than the 39.5 bias...... the radial 39.5's are EXPENSIVE!!! SO i figured might as well try a set out.... i've never bought 5 brand new tires before, always only 4..... makes a big difference.... Sucks that tires are so much! I have to put new rubber on the 82 2wd for the daily driver too!

Joey88RUNR · « **Reply #415 on:** Apr 14, 2009, 08:53:09 PM »

I did some comparing on interco's website, comparing the 36 to the 37 not much of difference, if i read it right the 36 irok is actually taller than the 37x14 on a 15, maybe because its wider

twistedtoy92 · « **Reply #416 on:** Apr 14, 2009, 09:09:57 PM »

well it all depends on radials and bias.... thats the real difference....

39.5 bias- 76 pounds, 39.5 OD, 11.8 tread width

39.5 radial- 96 pounds, 39.5 OD, 11 tread width

37 bias- 69 pounds, 36.5 OD, 10.7 tread width

37 radial- 77 pounds, 36.9 OD, 10.5 tread width

36 radial- 81 pounds, 36 OD, 11 tread width

36 bias- 66 pounds, 36.8 OD, 11 tread width

86bobbedtoy · « **Reply #417 on:** Apr 14, 2009, 11:11:09 PM »

man I love the way your rig flexes
Fn sick

twistedtoy92 · « **Reply #418 on:** Apr 15, 2009, 06:29:25 AM »

Quote from: 86bobbedtoy on Apr 14, 2009, 11:11:09 PM

man I love the way your rig flexes
Fn sick

Thanks Heath!!! Its workin pretty good..... need a long travel front DL though!

twistedtoy92 · « **Reply #419 on:** Apr 20, 2009, 08:56:51 PM »

picked up a few things:

-Drums & Shoes for my 82
- Marlin HD diff pinion seals
- Marlin HD TC output seal
- Marlin HD Transmission output seal
-54mm Hub socket
- Spindle nuts & washers


	Poll What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case??? 2.28's 21 total spline 0 (0%) 2.28's 23 total spline 5 (38.5%) 2.28 & 4.7 21 total spline 1 (7.7%) 2.28 & 4.7 23 total spline 7 (53.8%) Total Members Voted: 13

Poll

What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case???

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

Related Topics