Author Topic: TWISTEDTOYS 92 SAS-->7MGTE/R151F SWAP and FJZ80's in the works (Read 150835 times)

THK Matt · « **Reply #270 on:** Feb 11, 2009, 11:42:40 PM »

yeah man for sure.

eMOJO · « **Reply #271 on:** Feb 11, 2009, 11:48:03 PM »

Quote from: twistedtoy92 on Feb 11, 2009, 11:34:31 PM

the patience will pay off though, the Twisted Toy has came along way in the past month!

Hell yeah, this is the best build going ATM... always look forward to your updates

Bummer about the pups... I love blue heelers, I've had a couple over the years and my uncle worked them on his cattle property, not really a city dog unless you've got plenty of time for them.

twistedtoy92 · « **Reply #272 on:** Feb 11, 2009, 11:58:03 PM »

Quote from: eMOJO on Feb 11, 2009, 11:48:03 PM

Hell yeah, this is the best build going ATM... always look forward to your updates

Bummer about the pups... I love blue heelers, I've had a couple over the years and my uncle worked them on his cattle property, not really a city dog unless you've got plenty of time for them.

thanks man, means alot! $Beer Chug\'n$ yeah..... at least they didnt take my pup! I need to get my truck done so i can take my dogs out to romp around in the brush!

twistedtoy92 · « **Reply #273 on:** Feb 13, 2009, 02:11:08 AM »

well

....... FINALLY FINISHED!!

i was at the shop till 12:30 but hey, got er dun!!! LOL!

this thing is badass.... i am so shocked that it is actually done that i had to drive it around for 30 minutes before i realized what i was really driving!!! handles great on the freeway! did the power brake test in mid range first gear.... both tires burned with NO axle wrap or hop!!! crazy!! i wont be doing that again though because it was only a test.... i have to drill my damn front flange out for my driveline and then im going wheeling this weekend! it flexed a solid 36 inches..... not bad for leaf springs and arent broken in yet!!

well here are a few pics! like a dream.....

THK Matt · « **Reply #274 on:** Feb 13, 2009, 06:43:10 AM »

Congrats Bro.

looks great

$Beer Chug\'n$

eMOJO · « **Reply #275 on:** Feb 13, 2009, 05:20:05 PM »

Haha great news now it's time for

twistedtoy92 · « **Reply #276 on:** Feb 14, 2009, 12:31:27 AM »

oh man this things handles great!!!
I finished it up tonight! Installed quick release mudflaps, swapped TC flanges and installed front driveline and greased them up! I ramped it on our big truck ramp and the damn thing flexes like a champ!!!! I am soooo stoked to go wheeling after work tomorrow!!! I will have to post up pics!!!

Started January 17th....... Finished on February 13th........

THK Matt · « **Reply #277 on:** Feb 14, 2009, 12:55:27 AM »

1 month isn't bad.

you see my thread?

I'm getting a 92 Ex Cab V6 SR5 today!

twistedtoy92 · « **Reply #278 on:** Feb 15, 2009, 12:06:16 AM »

well

.... I had a BLAST breaking my truck in..... and i literally BROKE my truck in.... input shaft on the rear T case! top of a climb and two hops then POP!!!!! Tranny shifts and reduction box turns but the rear case has no movement!!! input shaft right?? floppin AA single bearing adapter!!! when i get my taxes back i am getting a MC R10 and 23 total spline input!!! i knew that would be a weak point..... i am pissed! now i have to have a buddy pick me up tomorrow with two of my spare cases/inputs (spare parts are good) call my boss to make sure i can use the ford and flat bed trailer, go pick it up from my buddies (which we towed it to tonight) and load it up, haul it to my shop, tear out the cases, set them back up and drop them back in! so i will be able to drive it but i am still getting the marlin stuff! Im eliminating the weak points right off the bat!! next is LONGS....... but on a good note i had so much fun wheeling!!!! it flexes like a CHAMP!!!!! my buddy took a pick of me flexin it out in the dark, hopefully he sends me the pic soon so i can post it up....... stay tuned folks.....

Twisted toy down temperarily....

82 HiLux · « **Reply #279 on:** Feb 15, 2009, 12:28:56 AM »

ok ya learned your lesson, ONLY BUY MARLIN STUFF!

twistedtoy92 · « **Reply #280 on:** Feb 15, 2009, 12:43:36 AM »

i know i was not happy running that adapter in the first place...... i knew id break it! but when i picked up the adapter, top shift case and skid plate/crossmember for $200 i couldnt complain!!! but now its on like donkey kong!!! MARLIN CRAWLER HERE I COME! $Beer Chug\'n$

At least i enjoyed breaking it!!!

twistedtoy92 · « **Reply #281 on:** Feb 15, 2009, 12:45:30 AM »

You guys never did get me my bumpstop though.... sent me three of the same and one WAY different! John said they'd send me one to match but never did..... still waiting on the spacers and such too.....

So i was thinking should i just go ahead and get the 4.7's in the rear case while i'm at it??? what do you guys think?

twistedtoy92 · « **Reply #282 on:** Feb 15, 2009, 12:51:53 AM »

im not sure exactly what to do.....

NorCalToy · « **Reply #283 on:** Feb 15, 2009, 09:59:27 AM »

dang dude....at lest you got to "wheel" it... bumme bout the broken parts though.

if you got the cash go fullout for marlin gear.

TheCookieMonster · « **Reply #284 on:** Feb 15, 2009, 10:23:37 AM »

those stock input shafts are quite weak...definetly get the total splines from Marlin

. and for the t-case gears it kind of your preference, do you want to go really really slow or just slow

twistedtoy92 · « **Reply #285 on:** Feb 15, 2009, 11:14:04 AM »

well.... 2.28's work great but ive wanted to know what a 4.7 feels like........ im fixin it today!
its at the shop now and im grabbin another case and tranny for good measure

twistedtoy92 · « **Reply #286 on:** Feb 15, 2009, 11:37:40 AM »

i'll make it work untill i can order marlins stuff.....

ok crew, i want YOUR INPUT!!

what should i do?? should i do 4.7's and 23 total spline/r10 adapter or just the 23/r10?

?

82 HiLux · « **Reply #287 on:** Feb 15, 2009, 12:22:01 PM »

i would put 4.7s in the rear case if i were you, because after you get used to the two 2.28 cases you will want lower. and if you have a stock case in front and the 4.7 in the back, you can still use stock low range if you want to, or you can go really really slow.

95SAS · « **Reply #288 on:** Feb 15, 2009, 06:19:52 PM »

I also vote for 4.7s in the rear case, I love mine!

eMOJO · « **Reply #289 on:** Feb 15, 2009, 10:15:35 PM »

Another vote for 4.7's

I've never had them but it would look good in your sig

twistedtoy92 · « **Reply #290 on:** Feb 15, 2009, 11:03:21 PM »

well 4.7's it is!!! i wanna go SLOW! I thought about it while i was putting the cases back together and i need the BEEF and LOW....... Truck is back up and running!! ill post a few pics.... turned out to be EXACTLY what and where I thought it was.... second case input shaft....

twistedtoy92 · « **Reply #291 on:** Feb 15, 2009, 11:13:23 PM »

THK Matt · « **Reply #292 on:** Feb 15, 2009, 11:16:13 PM »

twistedtoy92 · « **Reply #293 on:** Feb 16, 2009, 01:05:48 AM »

its badass isnt it....... i love this thing!!!! good thing i know how to work on toys and i have way too many spare parts!

Dr.Maxwe001 · « **Reply #294 on:** Feb 16, 2009, 07:10:05 AM »

neeto torpeedo looks good mine is going to the shop today to get the driveshafts set to set the right amount of inches

twistedtoy92 · « **Reply #295 on:** Feb 16, 2009, 08:46:21 AM »

Quote from: maxwe001 on Feb 16, 2009, 07:10:05 AM

neeto torpeedo looks good mine is going to the shop today to get the driveshafts set to set the right amount of inches

NICE!!!

my front drivline needs the 12 inch slip yoke, when I put her up on the lift it seperated the DL...... but when I was wheeling i had no problem under full flex!

SO........ Here is the list of things I am going to get before july, I want to have this thing built stout for the summer!

-Marlins 23 Total spline Input for rear case
-Marlins 4.7's for rear case
-12 inch slip yoke for front driveline
-Yukon 5.29's front and rear
-Detriot out back
-Aussie up front
-30 spline Longs and chromo hub gears
-build front and rear bumpers
-find a set of 38-40's

i KNOW its a hefty list but i believe it is feasable by July!

$Beer Chug\'n$

sloyota · « **Reply #296 on:** Feb 16, 2009, 08:57:17 AM »

nice truck...hope to you out at cow mtn. some time,maybe even the rubicon

82 HiLux · « **Reply #297 on:** Feb 16, 2009, 10:16:20 AM »

lookin good! its funny how with toyotas you make a list of stuff you want to do to your truck, spend a crapload of money and do it all, and then make another list! i have the same problem lol. there will always be a list, these trucks are never finished

THK Matt · « **Reply #298 on:** Feb 16, 2009, 11:02:59 AM »

I'd just Aussie F/R simple as hell to setup.

rednk1980 · « **Reply #299 on:** Feb 16, 2009, 11:20:29 AM »

IMO i wouldn't get the 4.7's i had them and it was too low. But Thats just the type of wheeling i do lot more trails that rocks so i didn't really need it.


	Poll What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case??? 2.28's 21 total spline 0 (0%) 2.28's 23 total spline 5 (38.5%) 2.28 & 4.7 21 total spline 1 (7.7%) 2.28 & 4.7 23 total spline 7 (53.8%) Total Members Voted: 13

Poll

What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case???

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

twistedtoy92 [OP]

Related Topics