The Eighty-Sixed Runner

[DTB]

like a regular sized cambells soup... that size?

I'm thinking like the bigger cans....like the Chunky soup .....You might have to experiment to get the right size. I have never done this but have seen it done before

[THK Matt]

kinda cool, my idea requires no welding though

[Doof]

DTB WINS the cup holder idea.... i have  a few minor changes to make before they are finished. but the one is getting close. since its the pass side i can flopp with it till i like it and then do the my driver tits.

ill edit this post when im done eating and ill add more good info on whats going on

[skipnrocks]

I agree with the chunky soup, or the fruit cans tend to come in a little bigger size,  Thats a pretty cool idea!
Dont forget to use a hole saw and put a good size hole in it to allow drainage!

Maybe you should find one that one of those foam can holder things fits in then it will hold whatever your drinkin in place real good.

[DTB]

DTB WINS the cup holder idea....

what do I win?? free beer? a marlin sticker? dual cases?

[Doof]

I agree with the chunky soup, or the fruit cans tend to come in a little bigger size,  Thats a pretty cool idea!
Dont forget to use a hole saw and put a good size hole in it to allow drainage!

Maybe you should find one that one of those foam can holder things fits in then it will hold whatever your drinkin in place real good.

copy...i have the perfect cans in mind...

what do I win?? free beer? a marlin sticker? dual cases?

you get a check in the mail my friend for a $75 good idea

[ontherocks]

copy...i have the perfect cans in mind...
you get a check in the mail my friend for a $75 good idea

you comin to the party on sat?

[Thomas P]

most boat supply stores have flush mount cup holders just cut a hole and slide em in, they look pimp, i mean baller

[Goose]

most boat supply stores have flush mount cup holders just cut a hole and slide em in, they look pimp, i mean baller

Yup, im gonna use the aluminum ones out of my old boat..

[Goose]

Flippin update??!?!?! 

[Doof]

lol ive got some... ill take pics when i get home and let everybody in on whats happened

is the gear oil milky too? or is it just getting into the knucks?

-This is total thread jackage   -

its just in the ball, im picking up some brake cleaner and grease on my way home so i can clean my bearings and what not, inspect and go from there. the gear oil still looks brand new out of the jub. my MC heavy duty axle seals are holding up and doing an amazing job. im stoked on how they're doing

[Goose]

yeah ive got the mc seals too.
they are pretty sweet..

PICS!!!

[NorCalToy]

WTF dude? the title says with pics.

[ontherocks]

lol ive got some... ill take pics when i get home and let everybody in on whats happened


its just in the ball, im picking up some brake cleaner and grease on my way home so i can clean my bearings and what not, inspect and go from there. the gear oil still looks brand new out of the jub. my MC heavy duty axle seals are holding up and doing an amazing job. im stoked on how they're doing

its prob. just seepin past your felts, do you get in deep water? and use silicone insted of spindel gakets.

[Doof]

felts are good and soft all the way around still... idk but heres pics of the axle and my driver half door mocked up and mounted

[spoiler]






mocked up doors



[spoiler]

[Ramrod]

you dont have enough grease in there at all and thats the reason why your shits all fagged off and rusty.  your supposed to pump a tube of grease into each knuckle, that is also why your getting water in your junk

[Doof]

o thats fun... i never knew that...

thanks broski

[KDXSR5]

you dont have enough grease in there at all and thats the reason why your shits all fagged off and rusty.  your supposed to pump a tube of grease into each knuckle, that is also why your getting water in your junk

I put a 3/4 of a tub in each knuckle, I have never seen one with only that much grease before, or one thats rusty.

[Ramrod]

there's a fill hole right at the top of the knuckle so you just stick the grease gun right in there and get too it and never even touch the grease yourself

[Doof]

lesson learned i guess... only make that kind of mistake once


and that was my next ?... thanks pat 

[ontherocks]

lesson learned i guess... only make that kind of mistake once


and that was my next ?... thanks pat 

i just packed mine, scotts, and dans befor i put the spindel on, then you know its worked in.

[Thomas P]

x2 i pack the birf really good, its the most critical, and then slop some around it and then top it off afterwards

[DTB]

I usually fill mine about half way up....

less mess when u gotta dig back into it

[ontherocks]

so is it back togeather?

[Doof]

nope.... damn ups didnt get my package to me today... tomorrow though

gameplan for friday

come home, weld up half doors, put knuckle back on and together, get grease and stay

[THK Matt]

gotta stay

[NorCalToy]

always gotta be

[kiyul4130]

damn that is rusty. i dont pump a whole tube in each knuckle but what ive always done is just lay on a 1/4-3/8" layer of grease around the inside of the knuckle ball and the same with the knuckle. then a real thin layer around the birf and its good.

[MiniSimp]

They should look like mine...

[THK Matt]

howd you get yours SO CLEAN!


WELCOME TO BOMB 47