The Eighty-Sixed Runner

[Duffil]

are you going to use some bumpstops?  those things are way inverted.

[Doof]

yeah i need to put them on... and will now that they actually flex. before they didnt flex for and i didnt think i needed them, but now i have that ill be putting them on for sure



and... i might be buying lil buddys DDDD's for a trial tire... hopefully i get some money soon so that can happen

[NorCalToy]

hey zues man!! your goin to DDDD's already?

[Jud]

That flexes way harder now. Oh and your exhaust is pimp! Twice pipes holmes! haha

[NorCalToy]

That flexes way harder now. Oh and your exhaust is pimp! Twice pipes holmes! haha

yea brah that is sick uber tight like badass, whats that add bout 250hp?

[THK Matt]

hey look its a cheap body lift!

[skipnrocks]

Right on man!  Nice work!  Runner is lookin BA....      With the overloads out did you end up rubbin a little up front? 

[DTB]

In case no one told ya.....

You might wanna think about getting a real set of jackstands


everything else look baller tho 

[Doof]

lol yea i have real jack stands, just not ones that are 3' tall lol


but yea it rubs but not to bad. i have to do some minor cut action and then it will be tits. im so stoked on how it flexes now. rides a lot smoother on highway now. ill get out the tape and get some numbers for everybody and myself. then i can measure how much it sags after time....

[Goose]

Missing the Gangster lean eh?

[Doof]

haha if i cut the blocks it would have mad a mean lean

its close to now...just need the cases and then it will be there...for now

[NorCalToy]

so whats up with gettin the DDDD's?

[Doof]

$$$$ shortage

[lilbuddy]

$$$$ shortage

And BTW toyocrawler is gettin them on thursday

Sorry bud

[DeadlyPeace]

lol yea i have real jack stands, just not ones that are 3' tall lol

I'd say it's time to make some then. I made some from an old set of rims, some 4" pipe, and my old shock mount plates (spring seats). Could if interested.

[Doof]

yeah that would be cool... i have old wheels just chillin around and pipe is easy enough to get as well as flat bar, just put a \__/ to it and its cherry

[DeadlyPeace]

Ok, next I get a chance to run by my shop I'll get a few pics.

[DeadlyPeace]

OK here's some pics of one of my jack stands. They are 32" tall and the rim is a 15" dia.




I used 4" pipe, but you could use down to a 3" depending on the hole in the middle of the rim. The top is a spring seat and the shock mount was cut off. They work great for working on axles too. Just bolt them down to keep them from spinning.


In the lower left you can see the top of another set I made. They have three 2"x3" tubing forming a triangle with a \___/ shape plate on top. These one were made to be a little more sturdy. The ones above will be easier and cheaper to make and seem to do real well.

[Goose]

I like the first cheap one with the stock u-bolt plate..
Im thinkin of building a set like that,
just high enough that the tires are off the ground a bit..

A set with a peice of C-channel facing up to grip around the bottom of the frame would be cool too..

[NorCalToy]

I like the first cheap one with the stock u-bolt plate..
Im thinkin of building a set like that,
just high enough that the tires are off the ground a bit..

A set with a peice of C-channel facing up to grip around the bottom of the frame would be cool too..

33's off the ground......

[THK Matt]

33's off the ground......

more then 33's

[Goose]

33's off the ground......

No, 37's ... 

[NorCalToy]

No, 37's ... 

then that would mean you got new tires and no one was notifyed?

[Goose]

then that would mean you got new tires and no one was notifyed?

No, but if im gonna build a set of jackstands like that id make them to work with the 37's im getting soon...

[THK Matt]

then that would mean you got new tires and no one was notifyed?

I wish.

[NorCalToy]

ahhhh. i see. (as i stroke my chins peach fuzz )

[THK Matt]

ahhhh. i see. (as i stroke my chins peach fuzz )

thats cause u aint a man yet.

until you have to shave everyday.. your doomed

[Doof]

enjoy it, shaving blows


so for the rig:

tomorrow im taking apart the U joints on my DL's and putting a new set on my DL so i have a DL again. and i might be able to crawl up a wall if my gearing was low enough because my tires stick out just a hair in front and might be able to get me up a wall if i wanted lol.... but depending on what goes on tomorrow i might try to get a torch and move my steering box. ill take some pics tomorrow of my filthy angles, and i got a pic of my DL, it blew enough to shoot the needle bearings out, i got a carnage pic of it. cell phone quality

[46&2]

enjoy it, shaving blows

Also dont forget to enjoy the ASS, there is no such thing as too much ass when you are that age

[lilbuddy]

are we going wheelin this weekend?

If we are moving your box tomorrow is probably a bad idea considering all the gay problems clown has ran into....