Author Topic: Yota_Krawler's build SOLD.... MOVING ON (Read 74253 times)

FLRunner · « **Reply #270 on:** Nov 04, 2008, 07:27:30 PM »

Not sure if you fixed the idler pulley bearing yet or not But i just replaced mine was very easy to do I just called a bearing supply shop and they had 1 in stock i believe it is a 6004 ? i would have to look though cost me 14 dollars .

yota_krawler · « **Reply #271 on:** Nov 04, 2008, 07:30:12 PM »

ya I fixed it today, I just put a new bearing in it from NAPA, its all good!

46&2 · « **Reply #272 on:** Nov 04, 2008, 07:58:22 PM »

Quote from: Yota_Krawler on Nov 04, 2008, 06:18:36 PM

time for a T100!!!!!

Are you going to bring that paint job with you?

yota_krawler · « **Reply #273 on:** Nov 04, 2008, 08:26:36 PM »

hell ya!

Dingman. · « **Reply #274 on:** Nov 04, 2008, 09:16:05 PM »

You know you really want to trade for a 2nd gen 4runner!

too bad your giving it up! are you going to start with a stock t-100?

86bobbedtoy · « **Reply #275 on:** Nov 04, 2008, 09:27:25 PM »

why T100?

yota_krawler · « **Reply #276 on:** Nov 04, 2008, 09:27:38 PM »

no lol I wanted a runner but I want a t100, I am not sure about stock or not we will see. There is one I am looking at but hopefully the guy doesnt sell before I am ready ya know.

yota_krawler · « **Reply #277 on:** Nov 04, 2008, 09:28:09 PM »

cause t100s have a 3.4 and a bigger extra cab.

Dingman. · « **Reply #278 on:** Nov 04, 2008, 09:32:12 PM »

Yea, i want to swap in a 3.4 when the 3.0 dies.

Plus the 4runner has more internal room than the t-100!
And......

im biased! lol

yota_krawler · « **Reply #279 on:** Nov 04, 2008, 09:36:43 PM »

but a runner does not have a bed lol I have wanted a t100 for Sooooooo long. They are basically a 3rd gen mini but bigger. But not "full size" It is going to be set up as a trail rig/DD I want a 1st gen runner, EFI, RED with Brown SR5 interior clean a F&%K on 37s for a Rock toy!

Dingman. · « **Reply #280 on:** Nov 04, 2008, 09:40:52 PM »

Lol, you can always chop and bob the 4runner?

lol jk

You gonna sas the t-100?

NorCalToy · « **Reply #281 on:** Nov 04, 2008, 09:42:52 PM »

just out of curiosity, what are you asking for the truck?

yota_krawler · « **Reply #282 on:** Nov 04, 2008, 09:43:22 PM »

6,500 OBO I put up a for sale thread

NorCalToy · « **Reply #283 on:** Nov 04, 2008, 09:44:29 PM »

Quote from: Yota_Krawler on Nov 04, 2008, 09:43:22 PM

6,500 OBO I put up a for sale thread

oh ok i looked a few mintues ago and didnt see one...

yota_krawler · « **Reply #284 on:** Nov 04, 2008, 09:44:53 PM »

Quote from: 904_runner on Nov 04, 2008, 09:40:52 PM

Lol, you can always chop and bob the 4runner? lol jk

You gonna sas the t-100?

for sure!

Dingman. · « **Reply #285 on:** Nov 04, 2008, 09:47:09 PM »

Im planning on sasing mine! Crap i need a welder!

Do you know anyone locally that rents welders? Maybe mjb welding?

Thomas P · « **Reply #286 on:** Nov 04, 2008, 09:49:01 PM »

if you need some welding I can help ya out, since we are practically neighbors!

Dingman. · « **Reply #287 on:** Nov 04, 2008, 09:50:05 PM »

LOL, that would be sick!!!!!!!!!!!!

ive been searching for ones on craigslist for a while now, but cant find anything i need.

Thomas P · « **Reply #288 on:** Nov 04, 2008, 09:52:10 PM »

i got mine at gates resale in chico for a good deal, and it was hardly used, might as well keep the thread jacking up since cody is done with this build...........

yota_krawler · « **Reply #289 on:** Nov 04, 2008, 09:59:01 PM »

lol ya I am done building it is now on to selling and atarting a new build!

Dingman. · « **Reply #290 on:** Nov 04, 2008, 09:59:58 PM »

Man, i still want to see your truck!

I checked some website and it said snow around spring valley starting last sunday

i wnat to go, but my stupid clutch master cylinder went out tonight.

yota_krawler · « **Reply #291 on:** Nov 04, 2008, 10:01:58 PM »

1985efiyota (thomas) has one for sale

Dingman. · « **Reply #292 on:** Nov 04, 2008, 10:03:08 PM »

v6? crap, let me find his thread.

Thomas P · « **Reply #293 on:** Nov 04, 2008, 10:04:41 PM »

i looked tonight for some stamping on the ring gear, so I could tell you the ratio, all it had was a 4 with a circle around it.....

yota_krawler · « **Reply #294 on:** Nov 04, 2008, 10:05:02 PM »

oh can they interchange, it is out of a 4cyl

Thomas P · « **Reply #295 on:** Nov 04, 2008, 10:06:13 PM »

yeah they can go either way, just have bigger bearings......

Dingman. · « **Reply #296 on:** Nov 04, 2008, 10:06:58 PM »

I looked i saw brake master cyl. not clutch

and for teh gearing, i believe it should have a 41 with a circle on the ring and i think a 9 or 8 tooth pinion. not sure, cannot remember off the top of my head. acutally that could be completely wrong

do you know how to set up diffs?

Thomas P · « **Reply #297 on:** Nov 04, 2008, 10:09:16 PM »

i have my brother do my r&p, but I know how........ what you got in mind?

Dingman. · « **Reply #298 on:** Nov 04, 2008, 10:10:47 PM »

Well i have the v6 diff out in my truck now. it has 4.56's

then i have the stock 4.10 4cyl front diff for the sfa.

now when i sas im planning on running at least 35's so i was thinking about regearing to 5.29's. ALready 4.56's with 33's suck!!!!!!!!!!!!!!!!

Thomas P · « **Reply #299 on:** Nov 04, 2008, 10:11:50 PM »

i just looked again closer and it is indeed 41 with a circle around it, the one isnt punched in quite as good as the four

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

Related Topics