Got the final install done on the e-locker this morning. I routed the harness up from the diff to the rear x-member, on top of the frame rail and then up through a rubber grommet into the cab. That all turned out really nice, i wrapped the whole harness in plastic loom and then sealed it all up with tape. I drilled a hole in a switch blank above the cd player and my toggle switch fit perfectly into the back of it. When i made the harness i ran the indicator light into the back of a stock rear diff lock switch. I then cut a hole and mounted that switch right next to my toggle. So know when the locker is engaged, the indicator light will light up the stock rear diff lock switch!
![Clapping! :clap:](https://board.marlincrawler.com/Smileys/marlin/applaus.gif)
Here is a few pics of the switch and harness. I did a nice clean job with connectors and heatshrink. In the last two pics you can see the rear diff lock switch in the middle above the CB. The last pic show it lit up when the locker is engaged
![Banana Guitar :bananaguitar:](https://board.marlincrawler.com/Smileys/marlin/bananaguitar.gif)