Well I got the exhaust fabricated, and found a bunch of little issues I need to work out. The good news is I got to drive it, and all I can say is WOW. This is one torque monster of a little motor. The bad news is I cracked the oil pan putting the engine in, poor weld quality using the welder at work. So I am going to remove the front diff, and pull the pan. Going to sand blast the pan, and fix the crack. Got the steering stabilizer relocated, and ran all the wires for the 02 sensors, but found the rear 02 plug would not work, so I have to order the downstream 02 sensor.
Also have an exhaust leak at the manifold to pipe flange, I had to replace one of the studs and it will not let the pipe seal enough. So I think I will order the newer steel manifold from toyota. Need to swap the oil pressure sender from the 22re, and do the resistor mod for the tach. Need to finish running the wires for the DLC.
But at least I know the engine runs good, and it is worth the effort and money.