The rebirth.

Started by Slolyfe, February 21, 2012, 06:58:08 PM

0 Members and 1 Guest are viewing this topic.

Slolyfe

Finally found some motivation. Leaving next friday for back to back trips so got to get it finished.

Was kinda worried about my pitman arm hitting my tierod but once I flexed it, the axle moved back significantly.




The previous owner of the knuckles had welded on mis-alignment spacers so I cut them down a 1/4 inch.
You'll never take me alive

superyota

ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Slolyfe

Got it all buttoned up today just need to put in the ram once it shows up. Decided to hold off on chopping the rear suspension off till I get back from my next three trips. Too much other stuff to do, not enough time.


With the drag link hiem on the top of the pitman arm, the drag link was getting scary close to my oil pan and hard coolant line.




So I flipped it to the bottom side and it clears everything.


You'll never take me alive

redrocket93

Looks good man. I like the heim setup, should be a lot stronger than the toy tie rod ends. What are you doing for the rear? Links?

Slolyfe

Quote from: redrocket93 on July 06, 2012, 10:02:44 PM
Looks good man. I like the heim setup, should be a lot stronger than the toy tie rod ends. What are you doing for the rear? Links?

Thanks, did the heims, six shooters with all arp,  trunnion elim, and 1.5 X .250 wall tierod and drag link. So it should hold up.

No links. Just moving the leaf hanger back and frenching it into the frame. Also rotating my pinion angle.
You'll never take me alive

Slolyfe

Got all the front dialed in today. Still waiting on the ram. Also painted the other side and got drunk.





Patched in the rest of the bed.


The help....

You'll never take me alive

brockbuilt85

Quote from: Slolyfe on July 08, 2012, 09:07:00 PM
Got all the front dialed in today. Still waiting on the ram. Also painted the other side and got drunk.


so all in all, id say it was a very productive day! haha
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Slolyfe

For sure! Well its all done. Steering is still a little slugish think its time for a pump. but we will find it out this weekend. Hahaha
You'll never take me alive

Slolyfe

You'll never take me alive

fordh8r

How'd the stripes hold up?  :disturbed:

Slolyfe

Fine. The bed side was way stronger than I thought. Just a few dents and lost the tail light.

You'll never take me alive

fordh8r

WTH were you doing in that spot?  ???

Slolyfe

Trying to go up a 6 ft vertical wall to pass my buddy. I have made it up that before.  Hahaha
You'll never take me alive

fordh8r

Hahahaha....you got got by that, "Made it before" way of thinking, huh? Yeah, I know that feeling. LOL

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

HogCanyonHopper

Doesn't look too bad at all on the damage. Cage did great eh. Windshield is fine, didn't pop out. Breakin' her in nice.  :clap2:
http://board.marlincrawler.com/index.php?topic=88478.0
Where are we going? And why are we in a handbasket?

My friend is goin to moan this weekend - RockcrawlinJK

Slolyfe

Quote from: HogCanyonHopper on July 17, 2012, 09:09:03 AM
Doesn't look too bad at all on the damage. Cage did great eh. Windshield is fine, didn't pop out. Breakin' her in nice.  :clap2:

No. It was a pretty controlled roll. As I was going over I had time to tell my buddy to move and turn off the ignition. Almost powered out of it in reverse but my rear diff hit that rock and stopped me dead.

Yea cage is clutch had a couple hard rolls with minimal damage to it.
You'll never take me alive

superyota

Looks like you guys had fun! I really like the way the truck looks with the bobbed and doved bed.
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Jud

One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

Slolyfe

Well competed in the CA Fireman's Olympics over the last two days and the rig did great. Until I smashed every body panel, snapped a rear output, twisted my driveshaft splines 90*, and blew up my CV joint.

But it was fun!
You'll never take me alive

superyota

Awesome! Lol. Let's see some pics buddy!
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Slolyfe

You'll never take me alive

superyota

Crazy!!!! How did you manage to break your output!? That's a lot of carnage!
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Slolyfe

Quote from: superyota on July 19, 2012, 03:53:38 PM
Crazy!!!! How did you manage to break your output!? That's a lot of carnage!

Was at hollister and they have a bunch of new pretty crazy stuff. I was bound up and trying to crawl it in low low, then POW!
You'll never take me alive

toyyota

I have extra first gen bed parts for a short bed, if you think you want to fix the bed...I'm in Atascadero...Bob

Slolyfe

Quote from: toyyota on July 19, 2012, 04:44:33 PM
I have extra first gen bed parts for a short bed, if you think you want to fix the bed...I'm in Atascadero...Bob

Thanks, I'm just going to rock it.
You'll never take me alive

brockbuilt85

When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

HogCanyonHopper

time for a 30 spline chromo??
http://board.marlincrawler.com/index.php?topic=88478.0
Where are we going? And why are we in a handbasket?

My friend is goin to moan this weekend - RockcrawlinJK

Slolyfe

Yea. I love the first gens. But this one is on propane.

Up in Washington right now. Going to stop by bobby long on wed.
You'll never take me alive

Slolyfe

Stopped by Longfield the other day. He was a super nice guy showed us around. Bobby has his own crawling course in his back yard! Picked up an output also.
You'll never take me alive