Author Topic: My 84 extra cab is gone. Tacoma build now. (Read 510705 times)

Hyena · « **Reply #270 on:** Jul 27, 2005, 09:52:28 PM »

We went up Saturday early morning and setup camp at Loon. Then we went in for the day to Spider. Came back out before dark. Then went back in and played around at Gatekeeper. Came back to camp and slept then went back in the next morning but didn't even go all the way to Soup Bowl before we turned around and headed back out. I think thats when I saw you by the spill way.

Hyena · « **Reply #271 on:** Jul 31, 2005, 02:14:46 PM »

Broke another nuckle stud this weekend

I am getting mad now. Fawkers are tight and they still break. That is 2 studs in 3 trips.

Yota4life · « **Reply #272 on:** Aug 01, 2005, 06:19:22 PM »

i welded my d-ring's with the same welder and i dont think they will ever come off.....

Hyena · « **Reply #273 on:** Aug 01, 2005, 09:21:09 PM »

Sweet, i will be testing them out a lot in a few weeks

bigman · « **Reply #274 on:** Aug 01, 2005, 09:28:55 PM »

no way will those welds break at all

WheelinBabe · « **Reply #275 on:** Aug 02, 2005, 12:50:48 PM »

Quote from: bigman on Aug 01, 2005, 09:28:55 PM

no way will those welds break at all

I agree.. I thinks that those are the best welds I've seen from you.. well, you did do a really good job on the ones on Chris' Cab.. lol, Ya my bf is a crapy welder so don't tell him..k?

Hyena · « **Reply #276 on:** Aug 02, 2005, 08:38:58 PM »

Quote from: WheelinBabe on Aug 02, 2005, 12:50:48 PM

I agree.. I thinks that those are the best welds I've seen from you.. well, you did do a really good job on the ones on Chris' Cab.. lol, Ya my bf is a crapy welder so don't tell him..k?

Im better at welding sheet metal now, lets just drop it.

I haven't arc welded in over 3 months and those were my first beads since then. I think they turned out nice, got good penetration too.

RHG · « **Reply #277 on:** Aug 03, 2005, 12:55:31 AM »

If its a good weld then it will never break, you should rip the bumper off first. I took a couple weld classes in college and we did some destructive testing on some welds. Cool

right there. The welded joint actually becomes stronger than the material that gets joined. Some fun watching my pretty welds get streched out until the plate goes POP!

crawlerdan · « **Reply #278 on:** Aug 03, 2005, 06:37:52 AM »

ive seen some good welds go pop, i rolled end over end at the hammers last year and sheared the welds that held on my front hanger. ooooooooooo that was weird, esed a crane to get it out!

Hyena · « **Reply #279 on:** Aug 05, 2005, 10:45:08 AM »

Pictures of the new rims. Only took 4 weeks for them to get to me because they were on backorder. 15x8 with a 2 1/2 inch bs. Flush valve stems.

http://photobucket.com/albums/v674/Hyena84/rims/

Hyena · « **Reply #280 on:** Aug 05, 2005, 01:53:21 PM »

Just ordered $80 worth of parts from Marlin crawler online. Bought 10 steering arm studs with the new E12 socket head and socket, 4 washers and cones, 8 nuts, and a hat. So when i get those in i can fix my broken steering arm studs.

RHG · « **Reply #281 on:** Aug 06, 2005, 03:16:58 AM »

you have that suspension dialed in looks like. Some good flex going on. Get er fixed and go get some more body damage!

Hyena · « **Reply #282 on:** Aug 06, 2005, 11:13:35 AM »

Ya, the front suspension is great. The rear chevies flex great too but they are rock anchors. always seem to get hung up on the front mounts unser the frame. I think it may be 4 link time.

Ramrod · « **Reply #283 on:** Aug 06, 2005, 01:29:12 PM »

Why did it take so long to get those rims. I got mine in two days from fourwheel parts. maybe it was the custom purple stripe.

Truggy · « **Reply #284 on:** Aug 06, 2005, 03:34:21 PM »

savannah you dont no crap bout welding and besides that me a brad weld bout the same .and oh yeah ive seen welds break a good factory weld on the original rear shckle hanger on a buddys toyso its possible

Hyena · « **Reply #285 on:** Aug 07, 2005, 07:03:00 PM »

Quote from: bigbluewillys on Aug 06, 2005, 01:29:12 PM

Why did it take so long to get those rims. I got mine in two days from fourwheel parts. maybe it was the custom purple stripe.

custom back spacing and on back order.

Hyena · « **Reply #286 on:** Aug 08, 2005, 08:34:35 PM »

Put my new marlin steering arm studs in today. I had one steering arm stud broken inside the nuckle so i had to weld a small piece of metal to it and twist it out. It was down inside there about 3/8 of an inch so i had to not weld it to the side. Got it out and cleaned the threads. Then i put in the new studs with some red loctite so they don't come loose. The studs look awsome with the new nuts too. These studs are sooo much easier to install and take out with the E12 head on them. No more double nutting the steering arm stud to tighten it or take it off. My truck is ready for the next wheeling trip!

Hyena · « **Reply #287 on:** Aug 21, 2005, 06:52:16 PM »

this weekend was rough. i know i broke either a passenger side birf or axle shaft. The drives side birf is popping badly too. other then that it wasn't too bad. don'y know what i am going to do to fix it. I guess the welded front end is a little too hard for even the treated birfields.

4DEES · « **Reply #288 on:** Aug 21, 2005, 08:49:40 PM »

did you get any pics from this weekend?

Hyena · « **Reply #289 on:** Aug 21, 2005, 09:17:48 PM »

Got some, none of my truck cuz i was always the picture taker. I can't post them right now. I can downsize them on this computer and my photobucket host is full

Gtown · « **Reply #290 on:** Aug 22, 2005, 03:48:20 PM »

steering studs suck to break. upgrade to the d44 studs. my little brother charlie just broke all of his pass studs and a burf near the gattor pit, but he has 39 in boggers. i just got rid of my toyota and got another jeep. dumb move but atleat it drives.l

Hyena · « **Reply #291 on:** Aug 22, 2005, 07:15:36 PM »

My new marlin ones are great, they haven't came loose yet. Anyway, me and a friend tor apart my front axle again. I broke the passenger side treated ringless Longfield. Here is the picture of it.

Truggy · « **Reply #292 on:** Aug 22, 2005, 07:45:24 PM »

hey thats talented were the pics dude

Hyena · « **Reply #293 on:** Aug 23, 2005, 04:25:11 PM »

I don't know how that was talent. I wasn't even doing anything hard. The last thing i did before it started popping was Soupbowl. The inner axle seal is shot to

. I guess it wasn't a good idea to leave the broken birf in there and still drive out of the trail. I can't get the seal out, the mounting surface is smashed/scuffed from the bif movong around so much.

RHG · « **Reply #294 on:** Aug 24, 2005, 05:03:46 AM »

Ouch, is that going to require a new housing? Time to upgrade to chromo longs! No more broken birfs being an issue.

Hyena · « **Reply #295 on:** Aug 24, 2005, 06:04:56 PM »

The housing is a little chewed up but it will work. I would love to get the new cromo longs but money is a tight factor right now. I won't have a job starting next week because of college. So i won't be having any money coming in. Plus i have a truck payment due every month. If i get the Longs then i will only have about $100 left over, kinda tight for not having job. Don't know if i can make it.

Hyena · « **Reply #296 on:** Aug 28, 2005, 09:35:57 PM »

I need 30 spline Longfields badly!!!!!!!!!

RHG · « **Reply #297 on:** Aug 28, 2005, 09:45:22 PM »

Wasnt there a set for sale on the board for like $500. I dunno that was a few days ago and they could be sold by now but check it out.

Hyena · « **Reply #298 on:** Aug 28, 2005, 10:10:30 PM »

Quote from: rocks hurt good on Aug 28, 2005, 09:45:22 PM

Wasnt there a set for sale on the board for like $500. I dunno that was a few days ago and they could be sold by now but check it out.

Yep, i replied to it yesterday and he hasn't gotten back to me.

RHG · « **Reply #299 on:** Aug 28, 2005, 10:24:09 PM »

Hopefully they are still available, that would fit your budget better than some brand new ones. You gunna make it to the round up if you can get it fixed?

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Related Topics