Author Topic: My 84 extra cab is gone. Tacoma build now. (Read 505223 times)

Hyena · « **Reply #1980 on:** Nov 27, 2007, 06:41:46 PM »

Anyone know what thread pitch and size that is? the axle didn't come with those nuts.

skipnrocks · « **Reply #1981 on:** Nov 27, 2007, 06:56:30 PM »

Quote from: Hyena on Nov 27, 2007, 06:40:19 PM

Very true!

Some Dutchman bling came in today.
shiny new compared to rusty old

the new ones look smaller but i suppose if you took all the rist off?

Hyena · « **Reply #1982 on:** Nov 27, 2007, 07:14:53 PM »

I didn't measure them but they looked the same when i had them out together. the rust could make the older one look a little bigger.

kiyul4130 · « **Reply #1983 on:** Nov 27, 2007, 09:21:59 PM »

damn, all you have to do is tack up a few things for mock up and you get a whole new page on your thread of good jobs. anyways...good job, on gettin the parts. haha and IM GUNNA WORK ON MY CHIT!

freds40 · « **Reply #1984 on:** Nov 27, 2007, 09:56:12 PM »

I haven't seen one with studs before. All I have owned/seen had just bolts. Ayway, I believe the bolts I've used on 60s were 7/16, possibly 1/2 but I'm pretty sure they were 7/16.

BTW, you might want to keep an eye out for a cheap 14 bolt. I have a suspicion you will kill those 30 spline shafts. If you chop off the 14 bolt from the spindles out, you can set them up on the 60 tubes and will be able to use 35 spline shafts. Sometimes easier than boring the housing.

Hyena · « **Reply #1985 on:** Nov 27, 2007, 10:03:58 PM »

i had heard of that from a few different people. i just didn't have a source for 14 bolt spindles. i didn'y really think i would kill the cromo 30 splines, i actually thought the output would blow before that. but we will see how well it holds up. i have the old ones as spares i guess.

freds40 · « **Reply #1986 on:** Nov 27, 2007, 10:12:39 PM »

What are you running for gears in the axles?

Hyena · « **Reply #1987 on:** Nov 27, 2007, 10:15:41 PM »

5.38's. and they are 7/16's studs. i think i counted like 22 TPI, but i don't think that is right.

freds40 · « **Reply #1988 on:** Nov 27, 2007, 11:38:47 PM »

With 5.38s your output should do alright. Cracks me up when guys run big tires with 4.10s and wonder why they break the output.

Standard 7/16 bolts are 14 or 20 TPI.

Goose · « **Reply #1989 on:** Nov 27, 2007, 11:53:19 PM »

blingin axles

Dont you wish toyota axles were that easy to change? haha

Hyena · « **Reply #1990 on:** Nov 28, 2007, 05:40:18 PM »

ok, its a 7/16's 20 then. i guess home depot doesn't have any kind of 7/16's nuts so i will head over to Osh tomarrow. and i wouldn't run 4.10's because of that reason.

Hyena · « **Reply #1991 on:** Nov 29, 2007, 10:16:34 PM »

this is going to take for ever, no hammers for me this year

Duffil · « **Reply #1992 on:** Nov 29, 2007, 10:24:33 PM »

Quote from: Hyena on Nov 29, 2007, 10:16:34 PM

this is going to take for ever, no hammers for me this year

why is that? what's gonna take so long?

Ramrod · « **Reply #1993 on:** Nov 29, 2007, 10:30:41 PM »

Quote from: Hyena on Nov 29, 2007, 10:16:34 PM

this is going to take for ever, no hammers for me this year

ya right! its like 5 months away. What do you need a front axle?

kiyul4130 · « **Reply #1994 on:** Nov 30, 2007, 01:00:04 PM »

Quote from: Hyena on Nov 29, 2007, 10:16:34 PM

this is going to take for ever, no hammers for me this year

dont go all out with the 60. just gear it and weld it up for the trip and keep the stock shafts. then build it up more when you get back.

Hyena · « **Reply #1995 on:** Nov 30, 2007, 05:16:43 PM »

Quote from: kiyul4130 on Nov 30, 2007, 01:00:04 PM

dont go all out with the 60. just gear it and weld it up for the trip and keep the stock shafts. then build it up more when you get back.

I will break a stock front 60 garrantied. over $3000 i am estimating to finish it. maybe i can take out a personal loan.

skipnrocks · « **Reply #1996 on:** Nov 30, 2007, 05:31:59 PM »

Quote from: Hyena on Nov 30, 2007, 05:16:43 PM

] personal loan.

I dont know if yourself would be willing to loan you that kind of money?

LOL K give me a break I havent slept for a while

Hyena · « **Reply #1997 on:** Dec 11, 2007, 08:51:34 PM »

trucks moving backwards i guess. going with different rear shocks. not too sure what yet.

Ramrod · « **Reply #1998 on:** Dec 11, 2007, 08:52:56 PM »

what? come on now

Hyena · « **Reply #1999 on:** Dec 11, 2007, 09:13:23 PM »

selling the airshocks to kent. they are a little too small for my truck anyway.

Ramrod · « **Reply #2000 on:** Dec 11, 2007, 09:15:59 PM »

alright alright, theres been a ton of coilovers for sale on pirate lately. or are you thinking coils?

Hyena · « **Reply #2001 on:** Dec 11, 2007, 09:38:24 PM »

either 2.5 airshocks or coil overs, can i buy yours?

Ramrod · « **Reply #2002 on:** Dec 11, 2007, 10:21:21 PM »

ya i'll sell them too you if you want to replace them with an equivelant set within the next month

kiyul4130 · « **Reply #2003 on:** Dec 11, 2007, 11:41:18 PM »

hahaha, sounds like no deal.

the 2.5 air saws are pretty sick. you have to drive your rig around for a little while to get them to settle in, probably even a few wheeling trips but there sick. deffinetally beef. i helped put them on my friends rig. got them on all 4 corners.

Hyena · « **Reply #2004 on:** Dec 17, 2007, 03:29:09 PM »

DTB · « **Reply #2005 on:** Dec 17, 2007, 03:35:14 PM »

thats pretty nifty...is that an ATV winch? Im guessing u cant do any pulls from the rear? its just for suck down?

Hyena · « **Reply #2006 on:** Dec 17, 2007, 03:45:38 PM »

ya its just a 2000 pound mile marker. no heavy pulling with it. i already broke the line once. hopeing the pully will help take some of the stress off of it. i made the whole pully at work last week. Now the rear is done except for shocks but that will come last. time to move on to the front axle.

Shoyrtt · « **Reply #2007 on:** Dec 17, 2007, 04:03:48 PM »

Looks good.

One thought though, is there any chance that the line gets bound up between the pulley and the bracket if there is any slack in the line? It looks really close, so I'm guessing it is good.

Hyena · « **Reply #2008 on:** Dec 17, 2007, 04:31:10 PM »

Ya it can get bound up, but only if the line slides off. i need to add a couple pieces of flat bar on the sides so it doesn't happen.

THK Matt · « **Reply #2009 on:** Dec 17, 2007, 04:34:02 PM »

whats this for?

Hyena [OP]

- Sales Employee -

Hyena [OP]

- Sales Employee -

Hyena [OP]

- Sales Employee -

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Related Topics