Colorado 4Runner Jamboree 2010 - July 30th, July 31st & Aug. 1st

[COToy91]

I was thinking of one like this


I know it will take some getting used to and I will prolly only wear it when I have a high chance of rolling or flopping

[toytank]

that would work whats something like that cost

[COToy91]

that would work whats something like that cost

$30, so not to much

[Volcom]

4 months away

[Quick Draw]

Wow, that's really coming up quick...  I don't think my truck will quite be BV carnage ready, but it should handle OCG like a champ. 

I still really need to get to some other trails in the area though.  All I have done is HC once and OCG a few times.

[COToy91]

HC and OCG on are my list
Carnage is a maybe

Hopefully the family reunion is not the same weekend, otherwise i cant go

[4runner freak]

As always, I can't wait(to finish my 4runner so I can go)
I'll be there! With 189:1 gearing

[dezrik]

Can't wait either , Gotta drive from Grand junction to the jambo right after my fresh cage work

[wakkjobb]

Going to fix my trans leak this week, attempt to fix the high-idle issue and stick on the sliders. How much JB-Weld should I buy?


>>Dan

[dezrik]

Theres a chance I might not make it in time for the Jambo, Got a job interview in California, I Think im gonna take it.

[Suz]

Leave your rig here for the summer, go out for the job, come back for the jambo and then take your rig home after. problem solved - job and jambo!

[wakkjobb]

Leave your rig here for the summer, go out for the job, come back for the jambo and then take your rig home after. Problem solved - job and jambo!

She just wants to drive... 

[Suz]

She just wants to drive... 

Shhhhh, he will catch on to my plan... I had actually meant leave it in Meeker. But, you *could* leave it with me. 

I mean how much damage could a girl do to it anyway....

my wife

July 31, 2005...

First of all, some "before" pix...


We had to remind the girls that DOUGHNUTS are for POLICE OFFICERS, not trucks.  Needless to say, the girls (3 total, one dugout all in shock  ), stole the show as there were at least 300 vehicles on this particular all-club-all-vehicle cruise...

[dezrik]

LOL Suz, I'm down for that if you pick me up at the airport prior to the Jambo

Ill send you the parts to finish it and when I get home Ill be able to drive it back to cali

[dezrik]

*Hopefully* Drive it back... LOL

[Suz]

LOL Suz, I'm down for that if you pick me up at the airport prior to the Jambo

Ill send you the parts to finish it and when I get home Ill be able to drive it back to cali

DIA or The Springs and we have a deal! 

Where in Cali is the job?

[89DLX]

I sure hope I can afford to go and meet some more Toyota-ers.

[Volcom]

List of Marlin members attending the Colorado 4Runner Jamboree!

Volcom
COToy91
wakkjobb & Suz
boggerunner
toytank
ajordan1975 (coming up from TX)
Okiyota
Quick Draw
4runner freak
jarboarder1
jss (bringing 2 or 3 rigs)
Phazertwo

Maybes?
dezrik
854RUN
Jakesteads
pumkin toy
4x4yota
Matty
89DLX
bigarms23 (coming from CA)
yotanation

[wakkjobb]

 

This is gonna be awesome with so many rigs! I am psyched!!!!!

>>Dan

[4x4yota]

so what setups are you guys running on your trucks mines stock and dont know if Id be able to keep up Im trying to get ready but dont want to go overboard

[boggerunner]

ive got a 90 4runner
3rz/w56/duals with 4.7 and long output shaft
sas 4.88 gears lockrite in front, 30 spline longs with hub gears arp steering studs
leaf swap in rear with a supra limited slip
square front drive shaft.
and just got a set of 35" bfg km2's

[Volcom]

so what setups are you guys running on your trucks mines stock and dont know if Id be able to keep up Im trying to get ready but dont want to go overboard

There are plenty of people that show up with stock or close to stock rigs.  There are also quite a few trails in the area that you can run stock.  You'll be fine keeping up on those trails.  Just make sure your truck is in good mechanical order and has a seatbelt for yourself & anybody riding with you.  I would also suggest bringing some tools, spare parts & belts if you have them, and some fluids (oil, gear lube, water, ATF or PS fluid).  A CB radio is also nice to have to communicate with the other rigs in your group.  I still haven't gotten a CB installed in my rig but is on the list of things to do before the Jambo.

[ajordan1975]

I'm a 85 p/u 4cyl 5spd. Dual cases 4.7:1 in the rear. waggy 44044 front springs, 63" Chevys in the rear. 35" BFG MT's, locked f/b. Longfields, winch, CB, etc etc....! Also I'm driving this beast from Houston TX.   

[Volcom]

1984 4Runner
22RE
39.5" Iroks
Aussie lockers F&R
Marlin dual ultimate crawler
4" TG springs
Addicted Off Road cage
Addicted Off Road front bumper
Warn M8000 winch

[wakkjobb]

You got a winch now? 
Did you get some beefier knuckle studs since last year?

84 reg cab
stock 22R
5.29s
Lok-Rite/Detroit
"4.7s" (said previous owner but I don't think so)
half bald MTRs
CV rear d-shaft
hi-steer
hydro assist
Warn XD9000i
IFS rotor swap
old-school Longs
a few 30-packs of PBR
Cheez-Its and bashed fenders.

I'm hoping to have enough dough to get new shoes before then; may go with some 36" Iroks to save some money and fenders since the 37s destroy them. Or just chop 'em out... whatever.

>>Dan

[Volcom]

You got a winch now? 
Did you get some beefier knuckle studs since last year?

I just bought it!  I'm excited to finally have a winch.  It's always a pain to have others winch me out of the BV Carnage exit or Patriot exit.  Now I can do it myself!

They don't make any beefer knuckle studs than the ones I'm running (ARP).  The reason one was broke was the steering arm backed itself off and wasn't tight.  That allowed one to get sheared.  I did buy the Longfield 5th stud kit and plan on getting those installed before the summer.  That should help keep the knuckle studs tight.

[motormouth559]

I'm heading from Fort Collins Co i put the destination and this is what i got 1. Head north on S Sherwood St toward W Oak St  0.1 mi
2. Take the 2nd right onto W Mountain Ave  0.4 mi
3. Turn left at N College Ave  0.3 mi
4. Turn right toward Jefferson St  79 ft
5. Take the 1st right onto Jefferson St  0.4 mi
6. Continue onto Riverside Ave  0.6 mi
7. Slight left at CO-14 E/E Mulberry St  3.1 mi
8. Merge onto I-25 S via the ramp to Denver  52.6 mi
9. Take exit 216B to merge onto I-76 W toward Grand Jct  5.9 mi
10. Merge onto I-70 W  8.9 mi
11. Take exit 260 to merge onto CO-470 E toward Colorado/Springs  5.7 mi
12. Take the exit onto US-285 S toward Fairplay  96.6 mi
13. Turn right at Co Rd 315  2.6 mi
14. Turn left at Co Rd 376
Destination will be on the right  0.1 mi

Co Rd 376


Does this look right?

[Volcom]

12. Take the exit onto US-285 S toward Fairplay  96.6 mi
13. Turn right at Co Rd 315  2.6 mi
14. Turn left at Co Rd 376
Destination will be on the right  0.1 mi
Co Rd 376

Does this look right?

Sure does!  We'll see ya there!  Post up if you have any questions about the Jambo!

[Volcom]

3 months away!

[4x4yota]

anybody willing to let me ride along if I can get time off work my truck wont be ready by then I just started a new job and have a baby on the way so I have to save money for a while but I still want to go...