ATTENTION ALL NEWBIES READ THIS FIRST

[Justin]

Hello newbie here. I'm in process of trying to take several trucks to make good one!
91 yota with rotted out ifs frame just wasn't cutting it anymore

[No Power]

Just give me all your parts and your worries will be over
The frame on the 91 was perfect you just wanted a new truck  
  From Mike in Kentucky
No Power (cause that's what my truck has = NO POWER)

[rodna69]

Very nice...newbee here from Nebraska w/ a 83 toy from California...didn't know these things came without rust.

[FATB0Y]

 

[scheid6996]

welcome

[whiteman]

Come too me My children, who bear gifts of metal, and grease, have no fear for the Marlin is here......       You are    now sit and drink    til you 

[RHG]

A new newbie here. I just bought a 89p-up thats bought as stock as can get. Its got a new motor and a bum transmission. Wont hold fourth, just grinds. Any sugestions? I just figured id order a rebuilt from Marlin in a couple weeks when I sell my Dodge Ram<--- cant put that on the rocks very easy and $60 a tank of gas sucks. Need a tow rig? Email me and Ill give ya some info. Also want a solid under the toy asap. I just read the write up on big mikes truck. That thing is sweeeeet! Where do you guys get the smileys from?

[WHITE_TRASH]

Hmmm 3rd gen x-cab....  Read $300 in the projects section.  I am still working on my 90 x-cab.  I think you'll get a kick out of the buildup.  The 3rd gen starts on page 9ish.

[finderskeepers]

Newbie with dial up...no flashin' here!  From Oklahoma.  Hubby just towed home an abandoned Trekker today.  Looking for info and fellow fools for 4x's. 

[No Power]

Newbie with dial up...no flashin' here! From Oklahoma. Hubby just towed home an abandoned Trekker today. Looking for info and fellow fools for 4x's.

Is the trekker like the very first 4-runner or am I thinking of something else?
Oh and WELCOME.

[h0nke]

haha that was a cool movie

[finderskeepers]

Is the trekker like the very first 4-runner or am I thinking of something else?
Oh and WELCOME.

Thanks for the welcome power.  Yeah, 81-83.  Only 1200 total built from what I read.  This is an 81.  22R.  All stock.  It started today!  Tranny is good.  No rust.  Bad shell for a long time so the entire interior is shot.  Will have to replace every hose and gasket cause it sat so long.  But not bad for a $100 tow fee!

[Thrasher]

Yes i am another newbie. I have an 86 pickup with a 3" body lift 33s and locker in the rear. i am looking at converting it to solid in the front with 5 1/2" springs all around this summer. full exo cage no bed. 38's fun stuff so i can hit the rubicon

[kewlynx]

Testing (taptaptap). Been lurking awhile, got a  nice little gear kit awhile back, dang winter seal failures anyway!!!

[Clint]

Newb, Checkin in

Manitoba Canada
2 -1980 Trucks ($200, $400)
2-20R
2-Blown Head gaskets
1-22R From Celica
All axles 4.38

2 Inch body Lift on drivable unit, parts a plenty
Just startin out with Toyota- so I am researching and reading a-plenty
Love the site
Keep it coming
I've got some pics of lots a stuff but nothing worth posting yet
I am looking to Lincoln Lock
Junkyard Lift
20R/22R Hydrid
Only running 31's for now

[boomyanker]

Hello,  I'm new here as well. i have been into to cars and trucks for a long time now. but about a month ago i purchased my first Toyota truck. its an 84 that i have treated to so far is a 5 inch sus. and 3 in. body with 38.5 tsl/sx and i was about to do everything to get it rolling good but i believe I'm going to get a 93 2wd and put a sas on it with the things i already have. so I'm sure ill be calling marlin soon for the twin shifter,  short throw, and front spring hangers really soon. money isn't the greatest now but every dime i have extra is going to that truck. but I'm glad to be here and plan on doing tons of reading on this forum. thank you everyone for the info i have seen so far.

[cougarfreak]

ein mal, bitte!!!  Chad here, fairly new to wheeling, but built myself a fomidable toy to learn with.  See sig for details.

[horshu]

Noob here, i feel like i'm missing out on the video.  i'm a dial up dummy.  I come from California and will return to the west soon,  but live in Virginia for now.  I have an 80 toy bobbed flat bed 4.5 lift  22R 31" bfg's pretty blue celica bucket seats a really nice toyota sticker and 14 coats of grey primer.  Also a 95 Taco 4x4 w/ airbags to support the 3000lbs of horseshoing equipment in the bed.  I love toyota's.  Am looking to buy a 90 runner in a couple of weeks.  All the cool mods are absent from my vhikles due to a wife in college.  Two more years, graduation, and the money is redirected to my choice of mods to the runner!  Can't wait

[bigdaddypoppop]

Hello All
Im a noob too.  used to go 4 wheeling all the time.  Did a ground up restoration on an old CJ6 long time ago.  Lookin to find a rig soon and get back into it with My daughter. 

Will be mostly lookin at ideas and seeing what you folks have done here.
 

[wildchild1066]

hi all just found this site i live in jersey . i've been wheelin a samuria and keep breakin axles so it's time to go yota . so far i've found alot of good info .

[RK]

newb up in Auburn WA

[slickw9]

  Well, hate to follow suite, but nu-b here with the rest of the nu-b posts.  Have an 83 Longbed Toy, 2 in susp lift, and 31's.  Nothing compared to what I have read, but trying to catch up, money is short these days.  My plan is for a 5 in lift, poss keep, 33's, dual transfers, rear locker, and a winch.  Then, and only then, will I be ready for the big time.
slickw9

[FruitaCrawler]

new here and to wheeling got hooked on toys from my Friends 1970 fj40 and later driving my dads 90 2wd pickup. current rig is a mostly stock 88 pickup with 22re and a 5 speed. currently located in Denver co so if anyone knows of any local toy clubs

[lees 94 yota]

hey im a newbie and have been wheelingfor about 3 years but have only been building my rig for a little over a year. Its a 94 yota short bed 3 in. body lift 6-7 in all custom suspension lift. 56in chevy springs rear, jeep wagoneer springs up front, sa swap stock toyota axle rear with detroit 5.29's front and rear. custom shackles, front tube bumper, and rock rails, soon will have an exo cage, and soon ARB up front. 35x12.50 pro comp x-terrain black steel rims. 35in. of flex in rear, and 40in. of flex in rear  

[Rocksurfer]

hey im a newbie and have been wheelingfor about 3 years but have only been building my rig for a little over a year. Its a 94 yota short bed 3 in. body lift 6-7 in all custom suspension lift. 56in chevy springs rear, jeep wagoneer springs up front, sa swap stock toyota axle rear with detroit 5.29's front and rear. custom shackles, front tube bumper, and rock rails, soon will have an exo cage, and soon ARB up front. 35x12.50 pro comp x-terrain black steel rims. 35in. of flex in rear, and 40in. of flex in rear  

Start your own thread and don't forget the pics.











                                                                                                                

[jldx4]

neewb checkin here been lookin at marlins site for a few years.  have an 80 truck plus one for parts or crawler???- (no engine or tranny) all other parts there.e-mail-  [email protected] if interisted. still learnin how this whole compooter thing works though...location santa cruz ca.

[gonzo]

jldx4    Your rig that you are selling will get more attention by posting it in http://board.marlincrawler.com/index.php?board=29.0 just click on this link to go to rigs for sale and start a new post.  If you have pictures it would be best to add them to the post.

When you try to put pictures in the rigs for sale thread they have to be 90KB or smaller.  Check out this link and see if this helps you http://board.marlincrawler.com/index.php?topic=5512.0 .  Read through it and you will find a link to down load a Windows program that will allow you to resize your pictures before you load them on the rigs for sale thread.  

[FATB0Y]

 

[Iluvmyyota]

Another Noob, but not to toyota. I own 3 of 'em! a 1985 pickup and 4runner both EFI! and my 94 pickup..my first toyota. This website is awesome and I look forward to meeting avid 4wd enthusiasts like myself. I live in chattanooga so I am really close to Tellico. That place is awesome! Next time me and my friends go I'll make sure to post pics!

[gonzo]

Another Noob, but not to toyota. I own 3 of 'em! a 1985 pickup and 4runner both EFI! and my 94 pickup..my first toyota. This website is awesome and I look forward to meeting avid 4wd enthusiasts like myself. I live in chattanooga so I am really close to Tellico. That place is awesome! Next time me and my friends go I'll make sure to post pics!

Iluvmyyota