tons 2rz three link front. Now slamming on its nuts spring under rear!newpics

[83 Crawler]

ya dude that car isnt bad you just need to fix the wipers so you dont have to flip them up lol and make sure the hood dont fly up again! that was scary

[89sastoyo]

are those metal shavings all over the ring gear from the grinding? that won't be too healthy for your bearings and gears if you don't get all that out 

yeah I got it all out I put it on jack stands and spun it around and around sprayin it off with break clean.

[83 Crawler]

truck is coming out sick. i havent seen it for a long time!!!

[89sastoyo]

thanks bra you should see it in person looks pretty sweet...

I fixed the car up some too. I fixed the front wheel that was rattling it was the cap for the wheel bearing nut rollin around in the center cap of the wheel. I also put a can on it and mounted my stereo legit..

[83 Crawler]

how did you mount it?

[89sastoyo]

its on a metal stand thing i made for it. it looks super ghetto but there was really no other way to mount it.

[83 Crawler]

you said it better on the phone lol

[89sastoyo]

either way it works really good other than I have noticed when I transition from a right turning drift to a left I knee the deck and hit the face plate release button. I welded the diff on the car to:d and put exaust on it.

But for the toyota. I got all the bolts I need to finish putting the rear axle together finally got my break pads so its pretty much on me to throw everything together and it will be driving minus a driveline. Im going to run triples and see how I like them. If I don't like them than ill go to duals with 4.7s I want to run the triples so I can have a shorter rear driveline. I really want to run a 1 piece and with the triples I can and still have a good driveline angle.

[swapped89]

Sounds pretty sweet man. How long will your driveline need to be with triples?

[89sastoyo]

if i remember right it should be right around 50"

[GrenadedToy]

hurry up and finish this turd so we can go wheelin on joels B day. you got 6 days honkey.

[swapped89]

if i remember right it should be right around 50"

Damn man, with triples? Thats still longer than mine with duals! haha. that will be nice for sure!

[mattlosch]

im running a one piece and wasnt mine about that long? without a cv also...

6-days till joels birthday i dunno if we will be done lol

[89sastoyo]

He's not going right on his birthday weekend. We can get done though aren't you gonna be in vegas next weekend?

[mattlosch]

i leave tomorrow morning!

[swapped89]

Where you goin?

[mattlosch]

vegas till sunday

[swapped89]

nice have fun, try the oxygen bar at treasure island. And you can get picked up at yer hotel in a giant limo for free if you go to the worlds largest strip club. the Saphire, go there its awesome  the bellhop guy at yer hotel can call them for you. 

[89sastoyo]

haha sounds like you know all about vegas.


But yeah I got all my misc stuff for my truck the other day finally done with my probation stuff and I;m going to work tomorrow so i should get it done asap

[swapped89]

Na. I went once, and that's about all.I remember lol

[89sastoyo]

so I planned on finishing it up thiss weekend but had to work last night just off a little bit ago. I have to re fab my x member make new mounts put the cases in do my rear disc again put my break lines on blead the breaks gear oil make drivelines build a floor and bolt on my pinion guard. From what I can remember right now thats it. I am also waiting on arp studs from ballistic for my steering. They should be here today or monday so im hoping by tomorrow ill have everything done except rear driveline and the studs. I will get pictures up of it when I get it moving. I will have the front driveline done today or tomorrow so I can roll around. The rear I am trying to find a d line of a truck with a 14 bolt so I have the ujoint and all that stuff to start with. also have some bling ill post up not to bling but blling(:

[DoveGray85]

It sounds like you still have some work to do! At least you're getting closer. The weather is still crappy, so it's a good time to work on the truck

I'm in the middle of a "head gasket" job. I needed a new head cuz old one had cracks. I'm also doing timing set, rod bearings, and rings while I'm at it.   

[89sastoyo]

very nice I went threw my second gen dang it ran so much better when I was done thats pretty lame but there cheap to rebuild and deff are a lot better to drive after.

Yeah I am gettin there lol I had a bunch of time off work but didnt have money now I have money and no time haha. I'm hoping within the next few weekends it will be done.

[89sastoyo]

tonight me and max busted out a couple things. I routed all my breaklines did the rear disc swap and bled the breaks they acttually have quite a bit of pedal for having a toyota mc still. I still need a proportioning valve but we'll see how they work.

here are some pictures aswell:D ejoyyy

[TheCookieMonster]

nice. you running tripples or quads in that sleeper ??

[89sastoyo]

hahah triples I still have a dummy shifter because my tranny is forward shift and is a single plate I never run a tunnel untill now so i didnt want it just cut and lookin ugly lol but i might cut it when I re do the tunnel and get everything legit. I wanna focus on cleaning up the interior a lot Its pretty hacked right now lol. I have like all bling in there but its just chillin no floor soon to be no seat belts lol I have to mount harness's and make the tunnel and clean the carpet and she'll be good lol.

[89sastoyo]

june 4th im entering a competition in bend OR. We'll see how it goes. From now to then I have to finish the tranny tunnel, build an interior cage. Make drivelines replace steering studs mount a winch and pack lol. Its going to be really hard since I only have a few days to do it all. I don't really know if I will end up going because of the winch thing. I personally hate them and don't want one on my truck.

[gnarrkill]

june 4th im entering a competition in bend OR. We'll see how it goes. From now to then I have to finish the tranny tunnel, build an interior cage. Make drivelines replace steering studs mount a winch and pack lol. Its going to be really hard since I only have a few days to do it all. I don't really know if I will end up going because of the winch thing. I personally hate them and don't want one on my truck.

im coming bro!

[swapped89]

Goodluck man! are u going to groundhog?

[GrenadedToy]

Just don't hammer it like cody was last year or your rear out put might turn to dust haha