0 Members and 3 Guests are viewing this topic.
I picked up a 20r shortblock BRAND NEW from a guy in town for $450.. a steal in my opinionThis motor is going in an 83 yota shortbed with the original 5 speed and a very dead 22r right nowI also picked up a old 20r from my neighbor complete from carb to pan for $30, Another steal even though it had a thrown rod, it has all the parts i need to bolt to my shortblock. i had the egr valve bolted up to the back of my short block head like normal with the metal tube ran to the top of the intake... well i decided to run a weber 32/36 and with the kit it came with a PCV intake block off plate and hose hook up for the PCV like i'm sure 1000 of you are familiar with here on the site.. but i don't know what to do with my egr valve on the back of the head now because since i removed the metal tube off the top of the intake which connected also to the side of the egr.. there is just a big hole in the side of the egr.. what do i do with this big hole?
I also had a question about my oil pump, do shortblocks usually have the oil pump already in the motor, you just have to bolt up the oil pick up tube?
and if so, will a 22r pick up tube bolt up and work fine, or should i take the time to pull the pick up tube out of my $30 20r?
i'm looking for a good electric fuel pump for the money also, 2-3 psi of course, maybe send me in the right direction with some of the experience you have had with them?
ha i'm sorry about the stupid questions, but i had 1 more. What are the torque setting for the harmonic balance Bolt and flywheel bolts?
will a 22r flywheel also work?
I really appreciate and time taken to answer a few questions, i just wanna get this thing right. i've never really built a motor up myself, just done headgaskets and little things like that. Thanks again, i can also post some pictures if i completely confused you.
i would just stick with a mechanical fuel pump if i was you. the pump that runs off the cam on the side of the head. ive had alot of problems with the aftermarket electic fuel pumps
ok that's what i figured. thanks alot. and by the way the intake worked out great
... but still to this day all i have came acrossed is 83's so finding a gas tank in town probably won't be easy!
This is a little backwards, but my shortblock is for a 76 2wd, the $30 20r i have is out of a 4x4, i'll probably just yank the pickup tube out of the parts 20r since i'm pulling the oil pan to put on my shortblock... as long as that will work!
Started by blyota91 Engine
Started by Rob_O Project Research and Build-Ups
Started by Yota Up Toyota Pickup/4Runner Tech 1979-95
Started by yoter4x4 1979-1983: How-To Guides
Started by beefyjw Transfer Case/Drive Line