Topic: Project BoostedRunner, SOLD

[peacesells]

Nice man! That stock crossmember hangs down like a boat anchor.. Is 18.5 with the 35's or 37's?

[pumkin toy [OP]]

Nice man! That stock crossmember hangs down like a boat anchor.. Is 18.5 with the 35's or 37's?

thanks!  well its got the 35's on it right now.   I got the skid plate all welded out and it turned out pretty good!  overall it turns out i gained 4.5" clearance.  it now measures 23" to the lowest point on the skid plate with the 35's on it.  that number is about 1.5" lower than the bottom of the frame.  So when i put the 37's back on it will be a little higher, but i plan on lowering the whole truck another 1.5"-2".  so realistically the final numbers will be around 22" to the skid and 23.5" to the frame with the 37's on it.  here's a couple pics... crappy cell phone pics again!

[YellowJacket]

Looking sick man, I love the new clearance!

Hey, I know you are busy with all your mods, but we need to talk about the paypal deal. Shoot me an email.

[pumkin toy [OP]]

well the MAF sensor i got today didnt really help. I tested both of them with the ohm meter and it looks like they actually both test bad. So i need a known good one to hook up and make sure that is the problem. idk what the hell to do with it now because i dont know anyone with a third gen supra that i could take the MAF from to test!

[twistedtoy92]

my buddy might have a good one! I'll get ahold of him and see if he's still got it!

[pumkin toy [OP]]

my buddy might have a good one! I'll get ahold of him and see if he's still got it!

thanks dude! much appreciated!

[ToYocRawleR]

cool rig man, nice fab work!!

[THK Matt]

mines an N/A MAF, id let you use it to see if thats your problem..... but i think you need a 7MGTE MAF

[pumkin toy [OP]]

cool rig man, nice fab work!!

thanks!

mines an N/A MAF, id let you use it to see if thats your problem..... but i think you need a 7MGTE MAF

yeah i need a turbo MAF or AFM as it is more commonly called for this engine.  The N/A MAF is alot different

[NITE KRAWLERS]

WE just need it on the trail bra!!

[pumkin toy [OP]]

so a guy from WY saw the pumkin on craigslist and called me about it on thursday.  He then called back yesterday and gave me an offer on the rig. we came to an agreement and i met him in WY today to drop it off!   It was pretty quick, i wasnt expecting to be selling it this weekend.  the deal we ended up making included the 37's and beadlocks on the truck so now i have to buy another set for the 4runner. i want to get some 40's so we will see what i end up buying for it.  I'm also gonna order my 23 spline dual case adaptor from marlin while they are on sale.  I'm stoked too because i can put a little money into my mr2 and get it on the road too!

[crawlerdan]

wow caleb, that was quick. good job man!!

[bigarms23]

congrats on the sale and i saw rocwalker on here selling a set of 4 40x13x17 mtrs

[pumkin toy [OP]]

wow caleb, that was quick. good job man!!

yes it was quick!  i'm happy!

congrats on the sale and i saw rocwalker on here selling a set of 4 40x13x17 mtrs

thanks, and i will have to talk to him

[YellowJacket]

Nice Caleb, congrats!

[oldyeller]

so a guy from WY saw the pumkin on craigslist and called me about it on thursday.  He then called back yesterday and gave me an offer on the rig. we came to an agreement and i met him in WY today to drop it off!  It was pretty quick, i wasnt expecting to be selling it this weekend.  the deal we ended up making included the 37's and beadlocks on the truck so now i have to buy another set for the 4runner. i want to get some 40's so we will see what i end up buying for it.  I'm also gonna order my 23 spline dual case adaptor from marlin while they are on sale.  I'm stoked too because i can put a little money into my mr2 and get it on the road too!

Where in Wy?

[pumkin toy [OP]]

Where in Wy?

he lives in worland WY and i met him in gillete to deliver it

[oldyeller]

Cool just might see it on the trails in Wy!

[pumkin toy [OP]]

Cool just might see it on the trails in Wy!

that would be cool! let me know if you do

[95SAS]

Aww im going to miss your truck!

On the other hand atleast you can build a badass 4runner now.

[pumkin toy [OP]]

Aww im going to miss your truck!

On the other hand atleast you can build a badass 4runner now.

yeah dude you and me were the only ones on this forum with badass orange rigs! but yeah i am stoked to build the 4runner some more.  i'm gonna order my 23 spline dual adaptor from marlin tomorrow then i gotta track down some 40's for a decent price!

[THK Matt]

Right on BoostedRunner xD

40s on 17" BL's would be pimp. Get on it MAN!

[pumkin toy [OP]]

Right on BoostedRunner xD

40s on 17" BL's would be pimp. Get on it MAN!

yeah it would be sick!  i'm gonna call around for some prices tomorrow.  I found a new set of four 40x13.50x17 MTR's on ebay for 1400 shipped to me. not too bad of a price

[pumkin toy [OP]]

Alright i got a list together of a few things to order from marlin.

-23 spline dual adaptor
-Top shift conversion kit
-2 triple drilled flanges
-CV front d-line to build into a rear d-line
-2 Low pro drain plugs for axles
-Upper axle housing gusset

They better answer the phone when i call tomorrow!

[YellowJacket]

Alright i got a list together of a few things to order from marlin.

-23 spline dual adaptor
-Top shift conversion kit
-2 triple drilled flanges
-CV front d-line to build into a rear d-line
-2 Low pro drain plugs for axles
-Upper axle housing gusset

They better answer the phone when i call tomorrow!

I might have an upper front axle gusset/brace I would be willing to ship out to you for free if you are interested, if I can find it.

[minicrawlin]

ha ha they Never answer man!! still haven't gotten my box either!! i'm calling tomorrow too if i get through i'll patch you through!  you gotta let me be apart of that  dual set up so i can know whats up on mine! this rigs gonna be photo opp crazy son!

[toyotanner]

yeah dude you and me were the only ones on this forum with badass orange rigs! but yeah i am stoked to build the 4runner some more.  i'm gonna order my 23 spline dual adaptor from marlin tomorrow then i gotta track down some 40's for a decent price!

i guess mines just not cool enough

[89sastoyo]

don't forget tims to....

[pumkin toy [OP]]

I might have an upper front axle gusset/brace I would be willing to ship out to you for free if you are interested, if I can find it.

ok thanks Tobin  PM sent also

ha ha they Never answer man!! still haven't gotten my box either!! i'm calling tomorrow too if i get through i'll patch you through!  you gotta let me be apart of that  dual set up so i can know whats up on mine! this rigs gonna be photo opp crazy son!

yeah dude! we are both gonna be tryin to call those sons of bitches tomorrow!

i guess mines just not cool enough

i forgot about yours dude!  you have a sweet first gen!  but yours is more of a red-orange so that doesnt count

don't forget tims to....

and i dont remember which rig Tim has

[NITE KRAWLERS]

ha ha they Never answer man!! still haven't gotten my box either!! i'm calling tomorrow too if i get through i'll patch you through!   you gotta let me be apart of that  dual set up so i can know whats up on mine! this rigs gonna be photo opp crazy son!

Ya dude photo opp's fo shor. We just need to get it running dude. So if anyone has a mass sensor for pumpkin to test hit him up. What would even work to, would be for someone to call pumpkin and he talk to ya on the phone to test your sensor (who ever has same one) wit a meter and see if it gets the same reading's he gets with his 2 that are bad, as far as we know for now. Just a idea, so he don't have to drop $300 bones and it still not be the problem. He needs to get it up and running again, miss n out on some siiiiiick photo opp's bro. haha  Oh and thats super sick  ya sold da pumpkin. Now the build is on bra!!! Was a sick ride through man....