Juds One Ton Single Cab

[lilbuddy]

fully fullied. i got most of my truck done today. just need the rod bearings from napa so pretyt much ill be done tomorrow.

[Jud]

makin quick progress, looks good.

are you gonna make anything that covers the top of the tires? or mudflaps for it?

idk what your black bow looks like, but you could make an L shaped bracket that would put the hilift over one of teh tires maybe not super far out, but enough to clear your cooler and black box

I will put mudflaps on it when I get a ticket for not having them. lol

DOing that with my setup would put the hilift too far out and too high. I may mout it between the tool box and cab.

[Jud]

fully fullied. i got most of my truck done today. just need the rod bearings from napa so pretyt much ill be done tomorrow.

Nice! I can't wait to wheel! Especially with my windows up and A/C cranked! haha (hopefully)

[LilChief87]

looking sweet

[86turboyota]

Jud i think it may be time for a new build thread since there isnt much runner left

[Jud]

Jud i think it may be time for a new build thread since there isnt much runner left

I'll just change the name. lol

[thegoofster21]

I'll just change the name. lol

yup just change the name its still most of all the same stuff

[Jud]

Well I finished up the A/C today I just need to get it charged now. Does anybody know what you have to do to convert it to 134a?!?!

I finished the dash completely, hooked up a radio (temporary) and CB, put the fenders, hood, and grill on. I mounted the drivers seat (Old seats from the runner for now), put a lap belt from the back seat of the runner on the drivers seat, hooked up my rock lights, bled all the brakes and clutch, put my rear window in, reinstalled my power steering cooler, and a few other little things.

I went to put my headlights in and the plastic inserts on the radiator support that the long adjustment screws screw into fell apart. Does anybody know if I can get these in like the "HELP!" section at AutoZone?

[86turboyota]

that thread is talking about using 134a i believe
http://pirate4x4.com/forum/showthread.php?t=787211

[Blingn]

dude nice build man, you going to bring that thing up to Moonrocks?

[THK Matt]

I went to put my headlights in and the plastic inserts on the radiator support that the long adjustment screws screw into fell apart. Does anybody know if I can get these in like the "HELP!" section at AutoZone?

all my car parts stores don't carry them for the toyotas here.... I was told to go to the junk yard.

[Jud]

that thread is talking about using 134a i believe
http://pirate4x4.com/forum/showthread.php?t=787211

Thanks! I'll check it out.

dude nice build man, you going to bring that thing up to Moonrocks?

Na I'm goin to Fordyce the 22nd-24th.

all my car parts stores don't carry them for the toyotas here.... I was told to go to the junk yard.

Yea ima go look at Pick-N-Pull tomarrow.

[4runner17]

loookin good. much lighter than the old runner. more pics?   

[Jud]

loookin good. much lighter than the old runner. more pics?  

Thanks.

Today I mounted the passenger seat and went to pick-n-pull and got the plastic inserts for my headlights. I washed it too, it looks ok. I'm gonna borrow a buffer and buff the paint out then it will be bling for sure.

[4runner17]

yea i use that maguiers cleaner wax or how ever you spell it. works pretty good.

[Jud]

I have 3M rubbing compound that works really good.

[kamakazecam9]

Well I finished up the A/C today I just need to get it charged now. Does anybody know what you have to do to convert it to 134a?!?!

I finished the dash completely, hooked up a radio (temporary) and CB, put the fenders, hood, and grill on. I mounted the drivers seat (Old seats from the runner for now), put a lap belt from the back seat of the runner on the drivers seat, hooked up my rock lights, bled all the brakes and clutch, put my rear window in, reinstalled my power steering cooler, and a few other little things.

I went to put my headlights in and the plastic inserts on the radiator support that the long adjustment screws screw into fell apart. Does anybody know if I can get these in like the "HELP!" section at AutoZone?

Dude I go to UTI in Sacramento, I could recharge your AC for free, I've got an AC certification

[Jud]

Dude I go to UTI in Sacramento, I could recharge your AC for free, I've got an AC certification

When can you do it? lol

[kamakazecam9]

When can you do it? lol

I could do of pretty much whenever you would just have to bring it somehow to sac since the equippment and machines are there, just hit me up sometime if you can't figure anything else out

[Blingn]

jud do it on your way to fordyce

[4runnin_87]

nice build! you got some skills!

[Jud]

nice build! you got some skills!

Thaks man! 

[Jud]

Today I traded my busted ass Bart beedlocks for some 15x10 reversed steel wheels. They are chrome but some dude painted them black. So I stripped the black off and they look bling. I also buffed out the paint and it's pretty shiney. Tomarrow I'm going to paint the doors red and take 1.5" blocks out of the rear. I will take some pics tomarrow.

[Jud]

I could do of pretty much whenever you would just have to bring it somehow to sac since the equippment and machines are there, just hit me up sometime if you can't figure anything else out

Can you fill it up wil R12? And how much you gonna charge? I can bring it by Friday the 22nd on my way to Fordyce. I don't have to be up there till around 9pm.

[Jud]

Heres a cell phone pic of how it looks before I took my 1.5" blocks out of the rear.

[toyotanner]

looks good jud just try not to flop it until you get an exo on there

[Jud]

looks good jud just try not to flop it until you get an exo on there

Yea I'm gonna try and do my best to keep it clean. I don't mind a little dent here and there. Hopefully it doesn't get hammered as fast as the runner did!

[lilbuddy]

damn that thing looks hella clean. if you destroy this one bit at fordyce that wouldnt be that tight

[86turboyota]

i thought you put fresh paint on it till i read your post, that thing looks hella clean

[Jud]

damn that thing looks hella clean. if you destroy this one bit at fordyce that wouldnt be that tight

Thanks, and yea ima try and keep it clean.

i thought you put fresh paint on it till i read your post, that thing looks hella clean

Yea just the doors are repainted. It's looks better in pics but it is pretty shiney in person.