unclejs revamp (playing DR )

[THK Matt]

nice nice.... thats why i deleted the old HO-MOBILE thread and started a new one...

[unclejpl4x4]

OK   installed 4.5 qts of royal purple,  got the Injectors from LCE   installed    and i found/fixed  my anti-freeze weep.   
Now we will see if me fuel economy will go up.  The truck already Idles a lot better.

[THK Matt]

nice nice.... so does  this mean.... (phase 2)

[unclejpl4x4]

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=35781795

[79coyotefrg]

[unclejpl4x4]

I like this shot 

[Redbeard1]

I just realized what you ment by the paint job looks familiar. Funny how two bald toyota lovin' white guys come up with the same ideas...  MWM or DTB needss to cue in with the unc and red in the picture chops.

[unclejpl4x4]

[Redbeard1]

 

[unclejpl4x4]

   well the truck has been runing rich latly  I can smell it in the fumes  and the trucks been pinging 2   and at a valve train noise when i wind it out 


I got work on her this week end

O and I found this clip on the floor under my feet  no clue what the F it gose 2.  ( yes i check the pedals )


The clutch has become very squeaky    it seams the bushings have worn out  i can wiggle the peddle sideways    

[GJToyotabug]

hey sorry for thread bashing but i'm dealing with the same problem with the clutch pedal how do we fix it?

[unclejpl4x4]

I was gonna start by taking of the lower dash / heater tube.    and maybe the whole pedal  and see if its plastic bushing or a sleave and go from there  + slap some lube in it so it will at least stop squeaking

[79coyotefrg]

is your AFm  ok??   O2 sensor ??

[unclejpl4x4]

AFM o2 is new

[79coyotefrg]

air flow meter, the thing with wires between your airfilter and throttle body

[Redbeard1]

You did use O2 safe RTV when you built the motor right??

[79coyotefrg]

[unclejpl4x4]

ok 1 here are my 80s style porn fog lights



pick this cooler up and crapboys for 39-30$ i forget




befor .........





ok and it's done




Heres a close pic so U can see how i mounted it   I was gona do something fancy  but i had a few then K.I.S.S




Now i was driving  home and i grab it  and guess what no burn.  if it was the factory tube i wound of gotten burnt so  I say $$ well spent 

[Toymin8r]

Look at all the pretty red hoses.   

[unclejpl4x4]

ok update    as some of U know i have had a problem with  a rich,high idle, surging, and hesitaion problem.

I finale had the time 2 look at the truck. I don't know how but i f-up the vac lines on the fuel reg,  pair valve,  c-can.

well if anyone has a haynes manual  they know the vac line carts for 90+ efi sucks  and so dose the sticker under the hood. I had a spare tube assembly with hoses on it which showed me the light.

so i made this little MS paint  cart of just those hoses.

I also had 2 redo the timeing.

 


  hint/trick:   if you have your tube assembly out  paint it black   then  paint the ends red,blue,green,yellow and so on. So U know  where they go no guessing 

[Wermz84]

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=35781795

black mud. 

ok update    as some of U know i have had a problem with  a rich,high idle, surging, and hesitaion problem.

I finale had the time 2 look at the truck. I don't know how but i f-up the vac lines on the fuel reg,  pair valve,  c-can.

well if anyone has a haynes manual  they know the vac line carts for 90+ efi sucks  and so dose the sticker under the hood. I had a spare tube assembly with hoses on it which showed me the light.

so i made this little MS paint  cart of just those hoses.

I also had 2 redo the timeing.

 


  hint/trick:   if you have your tube assembly out  paint it black   then  paint the ends red,blue,green,yellow and so on. So U know  where they go no guessing 

Does this mean it's running good now?   

[unclejpl4x4]

black mud. 


Does this mean it's running good now?  

black mud   this was the puddle she was refering 2  and she wanted me 2 go threw it alown ( dumb female)  i have been threw it befor.
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=36763763   there was a tree or stump in the middle i was geting hung up on.

as for running better i think so  realy have not driven it except 2 wawa  i'll be going on a 2 hr round trip to day. geting a new in box  Aussi locker from Thetransporter

[Wermz84]

let us know how it runs.     Very cool, I love my Aussie Locker. 

[unclejpl4x4]

went 2 the U-pull it over the weekend pick-up some 90 somthing celica seats , they need 2 be cleaned but they feel nice and work.
there tall  gona come close 2 the roof may have 2 take off the head rest won't know till i go to put them in i want them higher then the bench

[unclejpl4x4]

asfor the locker do 2 the tree falling on the  house  i did not get the locker yet got replan with TT

[THK Matt]

Hey unc, pull those seat covers off the foam and throw them in the washer!
they will clean right up!

[unclejpl4x4]

well i was under the truck to day  after i rotated the tires and lube my propeller shaft  and found new rust holes  I got get pics later  looks like for my first vac  illl be pulling the bed aging and droping the fuel tank and fixing that.

[79coyotefrg]

you didnt drop the tank when you had the bed off?? 

[unclejpl4x4]

No but there was no holes over there

[79coyotefrg]

No but there was no holes over there

  THEN ?