Author Topic: The Eighty-Sixed Runner (Read 261841 times)

Doof · « **Reply #150 on:** Nov 03, 2007, 03:26:00 PM »

Quote from: TEAM RAMROD on Nov 03, 2007, 01:33:12 PM

whats the hole in the bomber?

fender when i was doing some trim action..i would post a pic but photobucket is being $That\'s Gay$ and not letting me load...when it works ill post up some new updated pics

Ramrod · « **Reply #151 on:** Nov 03, 2007, 04:05:42 PM »

ah that sucks, rust or cutting accident?

Doof · « **Reply #152 on:** Nov 03, 2007, 04:17:29 PM »

cut off wheel accident

did you know anybody in that massive 100 car pile up???

Ramrod · « **Reply #153 on:** Nov 03, 2007, 08:25:49 PM »

no I have no idea what your talking about, where was it?

Doof · « **Reply #154 on:** Nov 04, 2007, 01:48:51 AM »

it was in fresno, just south....it was on yahoo home page that how i heard about it...when i read it i read that six year old yes killed along with a 28 yr old on the scene and like 15 were tken to the hospital with major fucked up

....

wow that thing was amazing when i read it

Doof · « **Reply #155 on:** Nov 04, 2007, 01:13:11 PM »

Quote from: TEAM RAMROD on Nov 03, 2007, 08:25:49 PM

no I have no idea what your talking about, where was it?

when i was talking to chris last night about it he told me that you lived in sonoma and fresno is where the marlin crew is so i got everybody mixed up

Doof · « **Reply #156 on:** Nov 04, 2007, 07:24:51 PM »

got a pic or three...the first is the bomber infront of the shop at my work. i forgot to take a pic with the g-lean and didnt feel like dropping the jack down so i took the pic like shown:

and then i made my cut marks...kinda hard to see but if you look close they are with silver sharpie. and the tire isnt mounted yet, i just rolled it over so i could get a ballpark idea of how much i needed to chop

and last but not least the hole. i first started to cut with a cut off wheel, but that was taking to long. so one of the amigos at work said i could use his jigsaw. i got about a four inch cut with it and then the blade snapped off. and the replacements didnt fit and they were for wood so i wouldnt have been able to use them anyways. so i got out the sawsall and took about four seconds and chopped the

out of the rest of the cut. the hole is from the cutt off wheel when i still had that pregnant dog out. and this pis is after i tried to hammer it in a little bit, then said to myself: take a pic so peeps can look and view my gaping hole....so here it is:

DTB · « **Reply #157 on:** Nov 04, 2007, 07:34:01 PM »

everyone whos done a lot of fab work can tell u silver sharpies are the

Doof · « **Reply #158 on:** Nov 04, 2007, 07:40:32 PM »

i love em...i try to do some graph here and there in class, and i use that to make

stand out... and one day (three days ago)i got the idea to use it to mark

so i could see it better.... and now it doesnt leave the old paint can i use to hold my change and ipod

Doof · « **Reply #159 on:** Nov 04, 2007, 07:58:39 PM »

i thought this was pretty crazy so i took a pic of it...front: top: rear: its a rear housing for one of the forklifts at my work...just a little hairline fracture

skipnrocks · « **Reply #160 on:** Nov 04, 2007, 08:20:56 PM »

Good crap howd that happen!!!

Doof · « **Reply #161 on:** Nov 04, 2007, 08:26:01 PM »

i assume your talking about the axle housing?

not sure, the amigo that drives it pulled up in front of the shop and said that there is a small leak of oil. so we got under it with a light and thats what we saw. so took it off and i cleaned it up to get it ready to ship out to get it fixed. it is amazing how that happened though.

skipnrocks · « **Reply #162 on:** Nov 04, 2007, 09:05:32 PM »

Quote from: silly58willy on Nov 04, 2007, 08:26:01 PM

i assume your talking about the axle housing?

not sure, the amigo that drives it pulled up in front of the shop and said that there is a small leak of oil. so we got under it with a light and thats what we saw. so took it off and i cleaned it up to get it ready to ship out to get it fixed. it is amazing how that happened though.

Actually I was talkin about that hole in your runner?

lOL

Just kiddin, thats an impressive crack in a forklift, someone must have been tryin to flex it out when it was loaded down?

Doof · « **Reply #163 on:** Nov 04, 2007, 09:08:59 PM »

hole in runner was cut off wheel gone wild

and i unfortinantly cant claim that as mine...i flex out my little lift though when my boss isnt looking or when nobody is around... i get up on like 4-6" blocks of wood and curbs...it gets sketchy on a forlift since they have no suspension

lilbuddy · « **Reply #164 on:** Nov 04, 2007, 09:32:54 PM »

Quote from: silly58willy on Nov 04, 2007, 09:08:59 PM

hole in runner was cut off wheel gone wild

Doof · « **Reply #165 on:** Nov 05, 2007, 04:38:04 PM »

skipnrocks · « **Reply #166 on:** Nov 05, 2007, 04:45:05 PM »

Looks good man, still got some trimming to do in the rear with that crazy cutoff wheel? Anyways looks pimp man!! now get out and wheel it!!!

Doof · « **Reply #167 on:** Nov 05, 2007, 04:53:13 PM »

Quote from: skipnrocks on Nov 05, 2007, 04:45:05 PM

still got some trimming to do in the rear with that crazy cutoff wheel?

cutt off wheels for body work when you try to round a corner

Quote from: skipnrocks on Nov 05, 2007, 04:45:05 PM

Anyways looks pimp man!! now get out and wheel it!!!

.... once the DL is done im going to the high lakes to break it in a little and fart around there

skipnrocks · « **Reply #168 on:** Nov 05, 2007, 05:03:23 PM »

i know how to shape that rear wheel well.... pile 6 of your fattest buddies in the back then go offroading.... wont take long!!!

Doof · « **Reply #169 on:** Nov 05, 2007, 05:04:53 PM »

Quote from: skipnrocks on Nov 05, 2007, 05:03:23 PM

i know how to shape that rear wheel well.... pile 6 of your fattest buddies in the back then go offroading.... wont take long!!!

could work...i would i just dont want to shread my tires just yet....im taking a ball ping hammer and a sledge to it

skipnrocks · « **Reply #170 on:** Nov 05, 2007, 05:27:58 PM »

Quote from: silly58willy on Nov 05, 2007, 05:04:53 PM

could work...i would i just dont want to shread my tires just yet....im taking a ball ping hammer and a sledge to it

Good crap man how about some finness!! LOL

DTB · « **Reply #171 on:** Nov 05, 2007, 05:30:17 PM »

Quote from: skipnrocks on Nov 05, 2007, 05:27:58 PM

Good crap man how about some finness!! LOL

or the proper tools might help

skipnrocks · « **Reply #172 on:** Nov 05, 2007, 05:33:25 PM »

Quote from: DirToyBoy on Nov 05, 2007, 05:30:17 PM

or the proper tools might help

Yea that too!

Doof · « **Reply #173 on:** Nov 05, 2007, 06:08:58 PM »

lol its a good stress reliever plus the paint that flakes away means i get to spray more

Quote from: skipnrocks on Nov 05, 2007, 05:27:58 PM

Good crap man how about some finness!! LOL

Jud · « **Reply #174 on:** Nov 05, 2007, 07:01:03 PM »

Looks good bro!

bad luck · « **Reply #175 on:** Nov 05, 2007, 07:11:08 PM »

lookin really good

Doof · « **Reply #176 on:** Nov 05, 2007, 07:18:33 PM »

thanks guys....once i get it repainted and the rocklights hooked up and working it will look [insert your word] and the CB hooked up and then bumpers and sliders, and shocks, and floor liner, and wheelin trips, and rock dents, and ......... then it will look [verb/adjective]

i like it minus the gangsta lean from stock rear springs

Hayes · « **Reply #177 on:** Nov 05, 2007, 07:19:06 PM »

Can't wait to see the finished product, and some wheeling pics.

Jud · « **Reply #178 on:** Nov 05, 2007, 07:25:56 PM »

I must have missed it,but what size tires are those? 35's or 37's?

Doof · « **Reply #179 on:** Nov 05, 2007, 07:26:58 PM »

Quote from: Jud on Nov 05, 2007, 07:25:56 PM

I must have missed it,but what size tires are those? 35's or 37's?

its all good....37's


	Poll whats the next step keep the runner 2nd gen extra cab/first gen bed

Poll

whats the next step

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Doof [OP]

Related Topics