Author Topic: Where can I find... (Read 1529 times)

Ruari · « **on:** Aug 05, 2007, 03:54:45 PM »

A factory battery tray (metal part that is welded on) for the left side of the engine compartment with "J" hook and hold down?

Thoughts, ideas, and suggestions will be greatly appreciated.

AaronB · « **Reply #1 on:** Aug 05, 2007, 07:27:13 PM »

were are you at? I have one i could cut out of a junk body.

Ruari · « **Reply #2 on:** Aug 06, 2007, 06:48:40 AM »

I am in Georgetown and would be willing to pay shipping even if it came from Austrailia as long as it is the driverside by the radiator overflow.

Cheesemaker · « **Reply #3 on:** Aug 06, 2007, 08:36:15 AM »

Just get some metal and have one welded up, or bent up and just make some step legs to hold it! I made one for my old nissan. Had some old diamond plate and bent it up by hand, and made some legs to hold one side up and bolted it to the fender!

Broke_Okie_Ty · « **Reply #4 on:** Aug 11, 2007, 01:06:48 PM »

you dont need those fancy trays... thats what bundges are for

i have one in cali if everyone else falls through. shippns no prob

86bobbedtoy · « **Reply #5 on:** Aug 11, 2007, 11:24:46 PM »

I built one from angle iron and bolted it down.

Author Topic: Where can I find... (Read 1529 times)

Ruari

Where can I find...

AaronB

Re: Where can I find...

Ruari [OP]

Re: Where can I find...

Cheesemaker

Re: Where can I find...

Broke_Okie_Ty

Re: Where can I find...

86bobbedtoy

Re: Where can I find...

Related Topics


	Author Topic: Where can I find... (Read 1529 times) 0 Members and 1 Guest are viewing this topic. Ruari Trade Count: (0) Rock Master Turtle Points: 1 Posts: 153 Member since Sep '02 Where can I find... « on: Aug 05, 2007, 03:54:45 PM » A factory battery tray (metal part that is welded on) for the left side of the engine compartment with "J" hook and hold down? Thoughts, ideas, and suggestions will be greatly appreciated. Report to moderator Logged Ruari Legg '84 X-TRA cab, 5.29 Front F-J80 high pinion e-locker/5.29 rear Tacoma e-locker, R.O.R.E. e-locker skid plates, MC dual t-case #480, MC 4.70 gears #1755, Budbuilt crossmember, MC crossover steering, Howe hydro-assist steering, Alcan springs with Orbit Eyes, FRORF full floater, TRD cam, LC Engineering adjustable cam gear, distributer, solid steel engine mounts, longfields, 35"x13.5 BFG Krawlers. AaronB Trade Count: (0) The 2K Group Turtle Points: 287 Posts: 2,452 Member since Nov '05 Wish I Was Crawling Re: Where can I find... « Reply #1 on: Aug 05, 2007, 07:27:13 PM » were are you at? I have one i could cut out of a junk body. Report to moderator Logged "Never make your passion your occupation. it will loose it's luster and become work. that's why i never wanted to become a gynecologist!" Quote from: skipnrocks on Nov 08, 2011, 05:36:37 PM I also taught him how to put in 5min of hard work and then spend 15min staring and admiring what you have done... Ruari [OP] Trade Count: (0) Rock Master Turtle Points: 1 Posts: 153 Member since Sep '02 Re: Where can I find... « Reply #2 on: Aug 06, 2007, 06:48:40 AM » I am in Georgetown and would be willing to pay shipping even if it came from Austrailia as long as it is the driverside by the radiator overflow. Report to moderator Logged Ruari Legg '84 X-TRA cab, 5.29 Front F-J80 high pinion e-locker/5.29 rear Tacoma e-locker, R.O.R.E. e-locker skid plates, MC dual t-case #480, MC 4.70 gears #1755, Budbuilt crossmember, MC crossover steering, Howe hydro-assist steering, Alcan springs with Orbit Eyes, FRORF full floater, TRD cam, LC Engineering adjustable cam gear, distributer, solid steel engine mounts, longfields, 35"x13.5 BFG Krawlers. Cheesemaker Rock Ninja Trade Count: (+3) Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: Where can I find... « Reply #3 on: Aug 06, 2007, 08:36:15 AM » Just get some metal and have one welded up, or bent up and just make some step legs to hold it! I made one for my old nissan. Had some old diamond plate and bent it up by hand, and made some legs to hold one side up and bolted it to the fender! Report to moderator Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen Broke_Okie_Ty Trade Count: (+1) Crawler Guru Turtle Points: -6 Posts: 733 Member since Jun '06 slightly deranged Re: Where can I find... « Reply #4 on: Aug 11, 2007, 01:06:48 PM » you dont need those fancy trays... thats what bundges are for i have one in cali if everyone else falls through. shippns no prob Report to moderator Logged 86bobbedtoy Trade Count: (0) Silver Turtle Award Turtle Points: 686 Posts: 3,938 Member since Oct '06 Re: Where can I find... « Reply #5 on: Aug 11, 2007, 11:24:46 PM » I built one from angle iron and bolted it down. Report to moderator Logged